Grooving insertname

The unique tool for profiling of Al material. Cutting edges is designed to combine sharpness and strength, suitable for continuous and intermittent turning. Used for external surface and inner wall machining of Al wheel hub

GC4325 For long tool life in grooving applications in steel and cast iron. Suitable for parting-off in stable conditions, especially in machines with oil coolant.

GC1135 ​CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts. Low to medium cutting speeds.

2023526 — What's the difference between pearlite, martensite and cementite? I read a lot about carbon being dissolved or in solution. What does that mean?

ODGroovingtool

Nov 21, 2021 — A downcut bit will minimise chipout on the lowermost surface. For most case uses, a spiral upcut bit is preferred. A word to the wise though - I ...

Milling inserts and grades for non-ferrous materials PCD-tipped, cermets, uncoated and PVD-coated carbide grades for manufacturing of non-ferrous materials.

By using inserts for grooving and profiling, one tool can be versatile, reducing the tool categories needed. Grooving diameter is 48-400 mm and the depth is 10-30 mm

Turning Inserts and Grades for Titanium and HRSA CVD- and PVD-coated carbide grades and ceramics for heat-resistant super alloys and titanium.

Milling inserts and grades for titanium and HRSA CVD- and PVD-coated and uncoated carbide insert grades for milling titanium and HRSAs.

Turning inserts and grades for cast iron Wide range of CVD- and PVD-coated and uncoated, CBN, and ceramic grades optimized for cast iron machining.

Magnuson Performance · Open now until 6:30 pm · Top Reviews · Nearby Hotels · Nearby Services · Cookie Settings.

Our extended reach pole top hanger is perfect for squirrel proof feeders. The 22" distance makes it impossible for squirrels to reach over and bypass the ...

Milling inserts and grades for steel Find your CVD- and PVD-coated carbide grades and uncoated cermets optimized for steel.

Turning inserts and grades for non-ferrous materials Uncoated carbide grade and PCD for aluminum and other non-ferrous materials.

Center Drill (Form B) ; 25.0 x 6.0, 100, 15, 8.0 - 8.9, 06132560000 ; 25.0 x 6.3, 100, 16, 8.0 - 8.9, 06132563000 ; 25.0 x 8.0, 100, 17, 10.1 - 11.1, 06132580000.

GC2135 ​CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts. Low to medium cutting speeds.

Milling inserts and grades for cast iron CVD- and PVD-coated and uncoated carbides and CBN-tipped and ceramic insert grades optimized for cast iron.

The width of the Little-Squirrel series precise grooving inserts can be anything between 1.0 mm to 6.5 mm, which means products with any edge width or nose radius can be provided according to customers’ needs. The inserts are mainly used for precise grooving, such as sealing slot and locating slot, etc. The tolerance of the edge width S of precise grooving and profiling inserts can reach 0.025. Inserts can also be mounted on the corresponding specifications of original tool series.

CB7015 Brazed CBN-tippped inserts ideal for threading hardened components. Can be applied in the hardness range HRc 55–62 and for finishing at limited cutting depths and eliminates the need for grinding operations.

GC1135 PVD TiCrAlN grade for ISO M, S, P, and K materials, optimized for stainless steel and heat-resistant super alloys. The best choice for sharp profiles in all materials and for low to medium speeds.

Threadinginserttypes

Milling inserts and grades for hardened steel CVD and PVD carbide grades along with CBN-tipped grades, cermets, and ceramics designed for hard part milling.

CB7015 Cubic boron nitride (CBN) composite grade for hardened ferrous materials and HRSA. Suitable for both continuous and interrupted cuts.

Oct 9, 2024 — Our buyers guide has the best ceramic coatings for cars to keep your car looking clean in a budget-friendly way.

Housing and Affordability. With a forecasted population of 27,820 people for 2025 zip code 45230 Cincinnati, OH will generate a good demand for housing, ...

Short hole drilling inserts and grades Peripheral and central insert grades as well as exchangeable tips for excellent hole quality in short hole drilling.

Groovingtools

Milling inserts and grades for stainless steel Find the right CVD- and PVD-coated carbide grades or cermets for your operations.

SpecialGroovingTool

GC1125 PVD TiCrAlN grade for ISO P, M, K, and N materials. Combines the superior wear resistance of a coated grade with the edge sharpness and toughness of an uncoated grade. Optimized for steel threading and for medium to high speeds.

IDGroovingTool

Deep hole drilling inserts and grades CVD- and PVD-coated insert grades designed for the precise hole tolerances of deep hole drilling.

GC1145 ​The safest grade choice for parting-off in fair to unstable conditions at low speeds. Works well when combined with High Precision Coolant (HPC) at medium speeds (reduced temperature).

Turning Inserts and Grades for Cast Iron Wide range of CVD- and PVD-coated and uncoated, CBN, and ceramic grades optimized for cast iron machining.

Turning inserts and grades for titanium and HRSA CVD- and PVD-coated carbide grades and ceramics for heat-resistant super alloys and titanium.

Concrete Polishing will transform your floor into a beautiful, functional, durable high-performance floor without the use of topical coatings. There are ...

Turning Inserts and Grades for Stainless Steel The latest CVD- and PVD-coated carbide grades for all stainless steel operations.

Turning Inserts and Grades for Non-ferrous Materials Uncoated carbide grade and PCD for aluminum and other non-ferrous materials.

Grooving insertspecification

GC1105 A PVD-coated carbide grade with high hot hardness and a good combination with the sharpest cutting edges. Specially suited for low carbon, stainless steel, and heat-resistant super alloys.

Welcome to Harvey, New Brunswick! Explore Harvey, a rural community rich in history, nature, and local charm. Whether you're a local resident or a visiting ...

GroovingTool Holder

Turning inserts and grades for stainless steel The latest CVD- and PVD-coated carbide grades for all stainless steel operations.

GC1105 Ideal grade for parting and grooving HRSA, titanium, and duplex stainless steels under good conditions. Requires stability, such as sub-chuck and feed reduction at center.

3 days ago — Setting up a Loroch machine is the first step in the sharpening process. Professionals start by cleaning the machine and calibrating it to the ...

Product Name: Grooving inserts Materials: Cemented carbide Series name: Little-Squirrel grooving inserts Chip breaker: -NF, -NM- SM, -MM Applications: External grooving or internal grooving Available grade: YB9320, YBC152, YBG102, YBG105

GC1025 A PVD-coated all-round grade for toughness demanding operations. Recommended for small part machining at low cutting speed.