CERMET BLADES Blade with ceramic alloy tips for heavy duty applications, especially for cutting stainless and acid proof steel. Cermet blades can be sharpened a couple of times.

Exactpipe cut 360

Technical details Power 4.6 HP / 3,4 KW Required Air pressure 6 bar / 90 psi Blade diameter 180mm (7.09“) Mounting bore 62mm (2.44“) Weight 26,7kg (59 lbs) Range of use Ø 110 - 360 mm (4“ - 15“) Set Includes: PipeCut AIR 360 Wrench with push stick A small funnel to fit into the oil inlet hole 5mm Allen Key for the oil port

Jun 3, 2022 — He was kind enough, and helpful enough, to include the URL to the ream drill size chart so you could access the information. I do not see ...

ExactPipeCut 460 Pro Series

Most lightweight (5,7 kg) pipe cutting system • Range of use: 15 – 170 mm (0.6" - 6.7") • Max pipe wall thickness: 8 mm for steel or 14 mm for plastics

20241026 — For softer materials like aluminum, cutting speeds can reach 200-400 SFM. These values depend on the material type, cutting tool, and specific ...

Warranty terms If the Exact PipeCut Saw becomes unusable due to material or manufacturing defects within the Warranty Term or *Extended Warranty Term at our discretion we will repair the Exact PipeCut Saw or supply an entirely new or factory reconditioned Exact PipeCut Saw at our discretion, at no charge. Warranty Term / *Extended Warranty Term The Exact Tools Warranty Term is for 12 months from date of purchase. *By registering on-line you will receive an additional 12 months Warranty Term for FREE. Warranty registration must be completed within one month of purchase.

Large single-speed universal pipe saw. It canbe used for cutting both steel and plastic pipes. The Pipecut 360 heavy duty design and construction plus the capacity to cut large diameter pipes make it the ideal all-around pipe cutting tool.

ExactPipe Rollers

TCT P-190 Blade with tungsten carbide tips only for cutting plastic pipes. TCT blades can be sharpened a couple of times so they will become like new.

Pipe Ø (OD) 110 - 360 mm (4“ - 15“) Wall thickness 45mm (1.8“) cast iron 45mm (1.8“) plastics Pneumatic PipeCut AIR 360 A new pneumatic pipe saw In Exact family. It is designed mainly for to be used to cut assembled pipes in a ditch, but it can be also used on the pipe supports like any other Exact pipe saw.

360E Voltage / Power / Current 220-240 V / 1400W / 6.1 A No-Load speed 7000 - 10500 r/min Blade holder diameter 48 mm (1.89”) Different bevel angles 30° | 37,5° | 45° Weight 11,2kg (24.7 lbs) Range of use Ø 110mm – 360mm (4.33”- 14.17”) Max. pipe wall 10mm (0.39”) st

To order from CMS Industrial Equipment Corporation, simply shop online, or fax your order to the number below. The staff at our US offices can also help you make the best choice for all of your pipe cutting needs. Warranty terms If the Exact PipeCut Saw becomes unusable due to material or manufacturing defects within the Warranty Term or *Extended Warranty Term at our discretion we will repair the Exact PipeCut Saw or supply an entirely new or factory reconditioned Exact PipeCut Saw at our discretion, at no charge. Warranty Term / *Extended Warranty Term The Exact Tools Warranty Term is for 12 months from date of purchase. *By registering on-line you will receive an additional 12 months Warranty Term for FREE. Warranty registration must be completed within one month of purchase.

ExactPipe Cutter 220E

Boring with a milling machine and a boring head offers several advantages over other methods of boring. First, it allows for precise control over the diameter and surface finish of the hole being bored. Second, it is a versatile process that can be used to bore holes of different sizes and shapes. Finally, it can be performed on a milling machine, which is a common piece of equipment found in many manufacturing facilities.

Technical details Voltage 110 - 120 V / 50 - 60 Hz Power 1200 W Voltage 2110 - 120 V / 50 - 60 Hz (Special Order) R.P.M. 1600 - 3500 r/m Intermittent S3 25 % operation Blade diameter 140 mm Blade center bore 62 mm Weight 5,7 kg Range of use 15 - 170 mm Max pipe wall thickness 8 mm for steel or 14 mm for plastics. Set Includes: PIPECUT 170 E Pipe supports set One TCT disc HM 140 x 62 (universal)

ExactP1000

Buy Unique Bargains 32mm Dia 60 Degree Straight Shank Chamfer Milling Cutter Countersink Drill Bit from Walmart Canada.

Once the boring head is properly set up, the milling machine’s spindle is turned on and the boring head is fed into the workpiece. The feed rate and cutting speed should be adjusted to match the material being bored and the desired surface finish. This is usually done by adjusting the quill feed rate.

Dec 21, 2023 — Frame Rate vs Refresh Rate. These days, most TVs will have a refresh rate of 60-120Hz (Hertz). That means your TV will refresh the screen 60 to ...

Browse all Harvey's restaurant locations in Brampton, ON. Get directions and see up-to-date restaurant hours so you can plan your next visit!

Pipe Ø (OD) 15 - 170 mm (0.6“ - 6.7“) Wall thickness 8 mm (0.31“) st, 14 mm (0.55“) plastic Cuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and all plastics Loading capacity of supports 418 lb

Boring is a machining process used to enlarge an existing hole to a precise diameter and surface finish. Boring can be performed on a variety of machines, including lathes, drill presses, and milling machines. In this article, we will focus on boring as it is done on a milling machine using a boring head.

Pipe Ø (OD) 75mm – 360mm (3”- 14”)Wall thickness 8mm (0.31”) steel, 25mm (0.98”) plCuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and all plastics

SolidCAM''s iMachining revolutionary CAM Toolpath and Wizard, provide unbelievable cycle time savings and tool life extension, increasing dramatically the ...

Exactcut software

PipeCut Bag 1 Exact PipeCut V1000 pipe saw Operating instructions Hex socket key 5 mm fitted to the machine Cermet V155 blade fitted to the machine DVD video disc including instructions

Much stronger 2500W 230V / 2200W 120V motor. Electronics protecting the motor from overload and “traffic lights” guiding the operator. Laser indicator for precise cutting. Improved adjustment mechanism for straight cutting. Professional quality - Made in EU. Cuts steel pipes with wall thickness up to 20 / 12 mm.

It’s a new era for spiral duct cutting. Exact PipeCut V1000 offers ease of use and a huge size range for cutting spiral ducts. The finished ends are straight and ready to be connected. As an option, we have special pipe supports for the V1000 that can hold spiral ducts from 3” – 40” (75mm-1000mm).

Voltage / Power 230V / 1010W (Special Order) Voltage / Current 110V, 120V / 8.4A No-Load speed 4000 r/min Blade diameter 155mm (6.1”) Mounting bore 65mm (2.55”) Weight 6,0kg (13 lbs) Range of use Ø 75mm - 1000mm (3”- 40”) Max. pipe wall 1,5mm (0.06”), 6mm (0.23”) seam.

As the boring head is fed into the workpiece, it removes material from the inside of the hole, creating a precise diameter and surface finish. The boring bars, feed, and speed can be adjusted as needed to maintain the desired diameter and surface finish.

Exactpipe cutter 170E

Professional Pipe Beveller for on-site welding applications Continuous good results for on-site pipe beveling applications with Exact’s PipeBevel 220E/360E you can easily make fast and accurate welding bevels to pipes in a variety of materials. The user interface of the machine is similar to Exact pipe saws, which makes it easy for the operator to adapt after cutting the pipe with any Exact pipe saw. The cutting head of the beveller has 3 cutting tips, each of them having 4 cutting edges to rotate once becoming blunt, so it is economical to use.

Exakt saw

Pipe Ø (OD) 75mm - 1000mm (3”- 40”) Wall thickness 1,5mm (0.06”), 6mm (0.23”) seam. Cuts the following pipe materials, Thin wall steel, aluminum, and stainless ventilation pipes.

The first step in the boring process is to mount the workpiece securely on the milling machine’s table. The center of the hole should be centered under the spindle and aligned with the axis of rotation. A drill bit or other tool is then used to create a pilot hole.

Voltage / Current 110V, 120V / 15A Available also in Voltage / Power 230V / 2500W Special Order No-Load speed I=1900 r/min, II=2885 r/min Blade diameter 165mm (6.50”) Mounting bore 62mm (2.44”) Weight 17,5 kg (38,6 lbs) Range of use 75mm – 360mm (3”- 14”) Max. pipe wall 20mm (0.8”) steel / 230V 12mm (0.5") steel / 120V 50mm (2”) plastics Electronically unit Blade speed pre-selection, automatic fuse, soft start, torque control Speed pre-selection I = Stainless steel and acid-resistant steel, II = all other materials Loading capacity of supports 465 kg, 1025 lb (3 supports)

Cuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and all plastics Loading capacity of supports 692 lb. THE MOST ADVANCED PIPE CUTTING SYSTEM EVER MADE! Much stronger 2500W 230V / 2200W 120V motor. Electronics protecting the motor from overload and “traffic lights” guiding the operator. Laser indicator for precise cutting. Improved adjustment mechanism for straight cutting. Professional quality - Made in EU. Cuts steel pipes with wall thickness up to 20 / 12 mm.

Performance Tool 2 3/8in to 2 5/8in Medium Swivel Oil Filter Wrench · Part # W54044 · SKU # 965869 · limited lifetime warranty Limited- ...

Watch a short video click here   Exact PIPECUT® 170 E Portable pipe cutting system Ø 0.6" - 6.70" Pipe Ø (OD) 15 - 170 mm (0.6“ - 6.7“) Wall thickness 8 mm (0.31“) st, 14 mm (0.55“) plastic Cuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and all plastics Loading capacity of supports 418 lb Most lightweight (5,7 kg) pipe cutting system • Range of use: 15 – 170 mm (0.6" - 6.7") • Max pipe wall thickness: 8 mm for steel or 14 mm for plastics Technical details Voltage 110 - 120 V / 50 - 60 Hz Power 1200 W Voltage 2110 - 120 V / 50 - 60 Hz (Special Order) R.P.M. 1600 - 3500 r/m Intermittent S3 25 % operation Blade diameter 140 mm Blade center bore 62 mm Weight 5,7 kg Range of use 15 - 170 mm Max pipe wall thickness 8 mm for steel or 14 mm for plastics. Set Includes: PIPECUT 170 E Pipe supports set One TCT disc HM 140 x 62 (universal)       Description lbs. No. $Price Add to Cart  Exact PIPECUT® 170 E  25.00 7010463US $1,758.00 Buy now         Exact PIPECUT® 280 Pro Series Portable pipe cutting system Ø 2" - 11" Pipe Ø (OD) 40mm - 280mm (2”- 11”) 20mm (0.8”) steel / 230V 12mm (0.5") steel / 120V 45mm (2”) plastics Cuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and all plastics Loading capacity of supports 692 lb. THE MOST ADVANCED PIPE CUTTING SYSTEM EVER MADE! Much stronger 2500W 230V / 2200W 120V motor. Electronics protecting the motor from overload and “traffic lights” guiding the operator. Laser indicator for precise cutting. Improved adjustment mechanism for straight cutting. Professional quality - Made in EU. Cuts steel pipes with wall thickness up to 20 / 12 mm. Technical details Voltage / Current 110V, 120V / 15A Available also in Voltage / Power 230V / 2500W Special Order No-Load speed I=1900 r/min, II=2885 r/min Blade diameter 165mm (6.50”) Mounting bore 62mm (2.44”) Weight 15,5 kg (34,2 lbs) Range of use 50mm – 280mm (2”- 11”) Max. pipe wall 20mm (0.8”) steel / 230V 12mm (0.5") steel / 120V 45mm (2”) plastics Electronical unit Blade speed preselection, automatic fuse, soft start, torque control Speed preselection I = Stainless steel and acid-resistant steel, II = all other materials Loading capacity of supports 465 kg, 1025 lb (3 supports) Set Includes: PipeCut Bag 3 Exact PipeCut 280 Pro Series pipe saw Pipe Support 280, 4pcs Operating instructions Hex socket key 5 mm and 2 mm fitted to the machine TCT 165 blade fitted to the machine DVD video disc including instructions   Description lbs. No. $Price Add to Cart  Exact PIPECUT® 280 Pro Series 115V  38.00 7010412US $3,583.00 Buy now                       Exact PIPECUT® 360 Pro Series Portable pipe cutting system Ø 3" - 14"  Large single-speed universal pipe saw. It canbe used for cutting both steel and plastic pipes. The Pipecut 360 heavy duty design and construction plus the capacity to cut large diameter pipes make it the ideal all-around pipe cutting tool. Pipe Ø (OD) 75mm – 360mm (3”- 14”)Wall thickness 8mm (0.31”) steel, 25mm (0.98”) plCuts the following pipe materials Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and all plastics Much stronger 2500W 230V / 2200W 120V motor. Electronics protecting the motor from overload and “traffic lights” guiding the operator. Laser indicator for precise cutting. Improved adjustment mechanism for straight cutting. Professional quality - Made in EU. Cuts steel pipes with wall thickness up to 20 / 12 mm. Technical details Voltage / Current 110V, 120V / 15A Available also in Voltage / Power 230V / 2500W Special Order No-Load speed I=1900 r/min, II=2885 r/min Blade diameter 165mm (6.50”) Mounting bore 62mm (2.44”) Weight 17,5 kg (38,6 lbs) Range of use 75mm – 360mm (3”- 14”) Max. pipe wall 20mm (0.8”) steel / 230V 12mm (0.5") steel / 120V 50mm (2”) plastics Electronically unit Blade speed pre-selection, automatic fuse, soft start, torque control Speed pre-selection I = Stainless steel and acid-resistant steel, II = all other materials Loading capacity of supports 465 kg, 1025 lb (3 supports) PipeCut Bag 3 Exact PipeCut 360 Pro Series pipe saw Pipe Support 360 Double and 2x 360 Single and tool for changing blade in the bag. Operating instructions Hex socket key 5 mm and 2 mm fitted to the machine TCT 165 blade fitted to the machine DVD video disc including instructions   Description lbs. No. $Price Add to Cart  Exact PIPECUT® 360 Pro Series 115V  40.00 7010413US $3,996.90 Buy now                  Exact PIPECUT® V1000 Ventilation pipe saw Portable ventilation pipe saw It’s a new era for spiral duct cutting. Exact PipeCut V1000 offers ease of use and a huge size range for cutting spiral ducts. The finished ends are straight and ready to be connected. As an option, we have special pipe supports for the V1000 that can hold spiral ducts from 3” – 40” (75mm-1000mm). Pipe Ø (OD) 75mm - 1000mm (3”- 40”) Wall thickness 1,5mm (0.06”), 6mm (0.23”) seam. Cuts the following pipe materials, Thin wall steel, aluminum, and stainless ventilation pipes. Technical details Voltage / Power 230V / 1010W (Special Order) Voltage / Current 110V, 120V / 8.4A No-Load speed 4000 r/min Blade diameter 155mm (6.1”) Mounting bore 65mm (2.55”) Weight 6,0kg (13 lbs) Range of use Ø 75mm - 1000mm (3”- 40”) Max. pipe wall 1,5mm (0.06”), 6mm (0.23”) seam. PipeCut Bag 1 Exact PipeCut V1000 pipe saw Operating instructions Hex socket key 5 mm fitted to the machine Cermet V155 blade fitted to the machine DVD video disc including instructions   WATCH DEMO VIDEO HERE   Description lbs. No. $Price Add to Cart  Exact PIPECUT® V1000 SYSTEM 120V  20.00 7010402US $1,422.00 Buy now                     Blades CMS Industrial Equipment Company has a wide range of specially designed blades for Exact PipeCut saws. High quality cutting blades are designed for different purposes and for different PipeCut machines. With the correct blade you can achieve optimal cutting results.               TCT 140 & TCT 165                            CERMET 140 & CERMET 165                        DIAMOND X140 & DIAMOND X165               TCT P150 (PLASTICS ONLY)         CERMET V155    TCT BLADES Blade with tungsten carbide tips for general use. Suitable for cutting steel, copper, aluminum and plastics. TCT blades can be sharpened a couple of times. TCT 140 Saw Blade will also fit Rothenberger PipeCut 200U & Rothenberger PipeCut Turbo 250 TCT 165 Saw Blade will also fit Rothenberger PipeCut Turbo 400   Dimensions (mm) 140 x 62 x 1.8 x 1.4 x 46 For Materials Steel Copper Plastics Aluminum For Machine Types PC 170, 170E, 220E     TCT 140 Price $84.00 7010486 TCT 140 $88.00 Buy now   TCT 165 For Pipecut 360 Price $89.00 7010487 TCT 165 $93.00 Buy now     CERMET BLADES Blade with ceramic alloy tips for heavy duty applications, especially for cutting stainless and acid proof steel. Cermet blades can be sharpened a couple of times. CERMET 140 Saw Blade will also fit Rothenberger PipeCut 200U & Rothenberger PipeCut Turbo 250 CERMET 165 Saw Blade will also fit Rothenberger PipeCut Turbo 400 Dimensions (mm) 140 x 62 x 1.8 x 1.4 x 46 For Materials Steel Stainless Copper Plastics Acid proof     CERMET 140 Price $105.00 7010496 Cermet 140 $110.00 Buy now   CERMET 165 For Pipecut 360 Price $120.00 7010497 CERMET 165 $148.00 Buy now    DIAMOND X140 & DIAMOND X165 Diamond blade designed only to be used for cutting cast iron pipes. DIAMOND X140 Saw Blade will also fit Rothenberger PipeCut 200U & Rothenberger PipeCut Turbo 250 DIAMOND X165 Saw Blade will also fit Rothenberger PipeCut Turbo 400 Dimensions (mm) 140 x 62 x 2.0 x 1.8 For Materials Cast iron For Machine Types PC 170, 170E, 220E     DIAMOND X140 Price $236.00 7010492 Diamond x140 $248.00 Buy now   DIAMOND X165 For Pipecut 360 Price $257.00 7010493 Diamond X165 $270.00 Buy now     TCT P-190 Blade with tungsten carbide tips only for cutting plastic pipes. TCT blades can be sharpened a couple of times so they will become like new. Dimensions (mm) 190 x 62 x 1.8 x 1.4 x 40 (mm) For Materials Plastics (PE, PP, PVC, etc.) For Machine Types P1000     TCT P-190          Price $63.00 7010489 TCT P-190 $93.00 Buy now     CERMET V155  In Exact PipeCut V1000 we use a specially designed Cermet V155 blade that has 58 extremely durable ceramic alloy tips. It is designed for cutting thin sheet materials such as spiral ducts. Cermet blades can be sharpened a couple of times so they will become like new. Dimensions (mm) 155 x 65 x 1.6 x 1.4 x 58 (mm) For Materials Thin wall steel, aluminum and stainless ventilation pipes. For Machine Types PCV 1000     CV155          Price $120.00 7010498 Cermet V155 $126.00 Buy now      Exact – Ground-breaking Solutions for Pipe Cutting and Finishing The Exact system: innovations that render pipe handling effortless, accurate and fast Over the last ten years, Exact has developed a number of modern tools for pipe cutting, finishing and processing. Innovative products from Exact raise the pipe working efficiency to an entirely new level. The Exact system is suitable for all pipes and materials Exact pipe cutters are suitable for all kinds of pipe materials; a single machine allows cutting pipes of greatly differing sizes. Pipe cutting is significantly faster as compared to traditional methods. The resulting surfaces are precise and of uniform quality – the pipes are ready for joining right away. Exact pipe cutters can be used almost anywhere, since in most countries they are approved for indoor use – for example, as compared to angle grinders, the fire hazards are substantially lesser. Exact pipe cutters are easy to move around and effortless to use, for it is not necessary to support the device while cutting. Since the cutting is fast and does not require strength, the physical work strain is very low. The ergonomic design of Exact pipe cutters allows avoiding accidents at work and the related absences. Moreover, the risk of developing work strain-related maladies is reduced. Efficiency and user-friendliness benefit the entire company Quick and easy-to-use Exact pipe cutters significantly improve work efficiency. The results are of higher quality and achieved faster as compared to former methods. The Exact products are designed to be long-lived and easy to maintain. It is quite usual for pipe cutters commissioned ten years ago to still be in daily use. Everybody wins: the employees feel better at work, the work progress is accelerated, and improved productivity is good for company profits. World’s best in product design 2013 In 2013, the Pipecut 220E, 280E, and 360E pipe cutters by Exact Tools won the internationally prestigious Red Dot Design award. The award is granted to technically advanced and operationally superior design, and the competition involved nearly 5,000 products from all over the world. Exact pipe cutters represent sustainable development: upon pipe processing, the tools’ power consumption is only 15% of that of an angle grinder, and all tool components are recyclable. Exact Tools – better results with less work To order from CMS Industrial Equipment Corporation, simply shop online, or fax your order to the number below. The staff at our US offices can also help you make the best choice for all of your pipe cutting needs. Warranty terms If the Exact PipeCut Saw becomes unusable due to material or manufacturing defects within the Warranty Term or *Extended Warranty Term at our discretion we will repair the Exact PipeCut Saw or supply an entirely new or factory reconditioned Exact PipeCut Saw at our discretion, at no charge. Warranty Term / *Extended Warranty Term The Exact Tools Warranty Term is for 12 months from date of purchase. *By registering on-line you will receive an additional 12 months Warranty Term for FREE. Warranty registration must be completed within one month of purchase.     Exact Pipecut and PipeBevel Home   Exact PipeCut and Exact PipeBevel Systems All content © Copyright 2024 CMS Industrial Equipment Company google5085db38241e0936.html

Contents Introduction to Engineering Technology  National Academies Report: Engineering Technology in the United States Definition of Engineering Technology Differences between Engineering and Engineering Technology Overview of Engineering Technology Fields Career Opportunities in Engineering Technology Can an Engineering Technology Major Become a Professional Engineer (PE)? Prepare for Engineering Technology  Code Camp  Code Camp – Day 1 Code Camp – Day 2 Code Camp – Day 3 Code Camp – Day 4 Code Camp – Day 5 Code Camp – Day 6 Code Camp – Day 7 Code Camp – Day 8 Code Camp – Day 9 Code Camp – Day 10 E-Day – SME Challenges ET Curriculum and Lecture Notes  Course Notes – Computer-Aided Design (Siemens NX) 4472  Semester Project NX Unit 1 NX Unit 2 NX Unit 3 NX Unit 4 NX Unit 5 NX Test 1 NX Unit 6 NX Unit 7 NX Unit 8 NX Unit 9 NX Unit 10 NX Test 2 NX Unit 11 NX Unit 12 Course Notes – CNC and Computer-Aided Manufacturing Course Notes – Engineering Graphics Course Notes – Manufacturing Processes I  Machining Lab Videos  Part 1 – Safety in the Machine Shop Part 2 – Machining the Handle (Part A)  Machining Lab – Sawing Machining Lab – Layout Machining Lab – Center Drilling Machining Lab – Straight Turning Machining Lab – Knurling Part 3 – Machining the Handle (Part B)  Machining Lab – Turning a Shoulder Machining Lab – Face, Chamfer, Thread, Form Turning Part 4 – Machining the Hammer Head  Machining Lab – Band Sawing, Facing, Milling, Drilling, Tapping Course Notes – Manufacturing Processes II Course Notes – Quality Improvement Course Notes – Statics and Strengths of Materials Course Notes – Tool Design Senior Projects  Current Project Proposals  STEM HUB Management System XRP Lift Mechanism and Carrier Design Pet Stain Detector Water Tank Process Control Demo Brew System Automation Mobile Robot Web Controlled Arm Bathroom Scale with Pulse Ox Pothole Mapper Pond Drum Skimmer Embedded RFID Tags in Pool Cues Dynics OT Network Solution for Automation and Robotics Lab VEX U Robotics Competition SICK Lidar Competition Benchtop Shear with Fence TECH 1411 Lab Project Development Vanguard – Optimized Future in Consumer Products Avery Dennison RFID Project Fundamentals of Engineering Technology  Basic Shop Math Mathematics for Engineering Technology Physics for Engineering Technology  Fundamental Quantities Chemistry for Engineering Technology Statics and Dynamics Electrical Fundamentals  Circuit Analysis Electronics  Electronic Components  Resistors Engineering Design Graphics  The Engineering Design Process  Design Constraints  Functional Constraints Safety Constraints Quality Constraints Manufacturing Constraints Timing Constraints Economic Constraints Ergonomic Constraints Ecological Constraints Aesthetic Constraints Life-Cycle Constraints Legal and Ethical Constraints Engineering Design Assumptions Design Methodologies  Concurrent Design Design for Manufacturing (DFM) Design for Assembly (DFA) Risk Mitigation through Design  FMEA – Failure Modes and Effects Analysis Intellectual Standards and Engineering Design Documentation  Clarity Accuracy Precision Depth Breadth Relevance Significance Objectivity Logic Drawing Instruments  Pencils and Lead Paper  Folding Engineering Drawings Drawing Boards and T-Squares Compasses Dividers Triangles Scales Erasers Protractors Dry Cleaning Pad Drafting Brush Eraser Shield French Curve Drafting Tape Circle and Shape Templates Line Conventions and Lettering  Lettering Width and Types of Lines Visible Lines Hidden Lines Section Lining Center Lines Symmetry Lines Dimension, Extension, and Leader lines Cutting Plane Line Geometric Construction  Geometric Solids  Tetrahedron Octahedron Dodecahedron  Euclid’s Development of the Dodecahedron Graphical Projection Systems  Parallel Projection  Axonometric Projection  Isometric Projection Dimetric Projection Trimetric Projection Oblique Projection Orthographic Projection  Third-Angle Projection First-Angle Projection Miter Line Perspective Projection  Single-Point Perspective Two-Point Perspective Three-Point Perspective Dimensioning  Fundamental Dimensioning Rules  Inch Vs. Millimeter Dimensioning Differences Chart Rules for Dimension Lines Rules for Extension Lines Rules for Leader Lines (Leaders) Reading Direction Reference Dimensions Geometric Dimensioning and Tolerancing (GD&T)  General Tolerances Form Tolerances  Roundness or Circularity Straightness Ordinate Dimensions Working Drawings  The Importance of Working Drawings as Legal Documents Types of Engineering Drawings  Tabulated Drawing Multiview Drawings Graphical Calculators and Nomograms  Slide Rule Alignment Graph (Nomogram) Logarithmic Nomogram – Multiplication CAD – Siemens NX  NX Tutorials  NX Tutorial Video 1 – User Interface NX Tutorial Video 2 – Drafting Workflow NX Tutorial Video 3 – Expressions Editor NX Tutorial Video 4A – Sketch & Revolve NX Tutorial Video 4B – Datums and Features NX Tutorial Video 4C – Pattern Feature NX Basic Modeling Workflow  NX Master Model Concept NX Units – Important Note Design Intent Parametric Modeling NX View Controls  NX Layers NX Part Navigator NX Sketch Task Environment  NX Sketch Color Codes NX Measure Tool NX Expressions Editor Associative Copy Commands  Extract Geometry NX Assemblies  NX Exploded Views NX Extraction Path NX Part Families NX Curves  NX Law Curves  Roots Blower Profile Gear Generator Model NX Surface Modeling  Surface Continuity (G0, G1, G2, G3) NX Mesh Surfaces  NX Extrude Sheet Body NX Ruled Surface NX Through Curves NX Through Curve Mesh NX N-Sided Surface NX Sweep Features  NX Section Surface NX Swept  NX Swept – Angular Law Orientation NX Sweep Along Guide NX Drafting  Setting Up Drawing Templates NX Drafting Preferences NX Hole Table NX Partially Shaded Drafting Views NX Render Sets Create a Custom Symbol in NX NX Drafting Symbol Control Characters NX Drafting – Visibility of Objects NX View Break NX Algorithmic Modeling NX Implicit Modeling JT File Format and Viewers NX Sheet Metal CAD – AutoCAD  AutoCAD Sample Files Design Problems  M40 Glow Plug Engine  Crankcase Group  Crankcase Connecting Rod Crankshaft Wrist Pin Piston Cylinder Liner Head Gasket Cylinder Head Glow Plug Cover Plate Cover Plate Gasket Fuel System  Carburetor Assembly  Carb Body Assembly  Carb Body Jet Molding Throttle Arm Carb Rotor Carb Hardware Fuel Line Needle Valve Assembly  Valve Body Assembly  Valve Body Overmolding Valve Body Detent Spring Needle Needle Valve Bracket Needle Valve Hardware Fuel Tank Assembly  Fuel Tank Exhaust System  Silencer Body Silencer Baffle Silencer Tail Power Connection Group  Prop Nut Drive Hub Thrust Washer Parametric Fuel Tank Mold Design – Rotational Molding Carnivore 212  Carnivore 212 Parts List Bike Repair Stand Bike Light Housing 30 Note Music Box Phone Holder Guitar Pedalboard Sandbox Digger Machine Elements & Features  The Classical Simple Machines  Inclined Plane Lever  Class 1 Lever Class 2 Lever Class 3 Lever Wheel and Axle Screw Pulley Wedge Design Features  Holes Screw Threads  Screw Thread Manufacturing  Thread Whirling Tap Drill Size Calculator – Unified (UN) – Actual Tap Drill Size Calculator – Unified (UN) – Conventional Screw Thread Terminology  Allowance Basic Form Profile Chamfer Crest Flank Flank Angle Form Height Helix Lead Lead and Helix Angles Major Diameter Minor Diameter Pitch Pitch Diameter Root Starts Thread Angle Screw Thread Designation  Unified Inch Screw Threads – Designation  Unified Screw Threads Introduction Nominal Size (Basic Major Diameter) Threads Per Inch Thread Form Symbol Thread Pitch Series Symbol  Graded Pitch Series Constant Pitch Series Special Pitch Series Thread Class External or Internal Thread Designation Left-Hand Threads Knurls Fillets and Rounds Splines Draft Angle Chamfers Tapers Cogs, Gears, and Sprockets  Harmonic Drive Gear Manufacturing  Gear Shaping Powder Metal Gear Manufacturing Gear Hobbing Machining Gears Gear Skiving Gear Casting Injection Molding of Gears AGMA – American Gear Manufacturers Association Gear Types Gear Design & Specification  Involute Curve Linkages  Over Center Linkages Fasteners  Threaded Fasteners  See Also: Screw Threads Tool Fittings and Recesses Engineering Materials  Mechanical Properties of Materials Metals and Alloys  Ferrous Metals  Steel  Stainless Steels  Austenitic Stainless Steels Ferritic Stainless Steels Martensitic Stainless Steels Duplex Stainless Steels Precipitation Hardening Stainless Steels Tool Steels  A Series Cold Work Tool Steels H Series Hot Work Tool Steels W Series Carbon Tool Steels T & M Series High Speed Tool Steels Other Steel Classifications Electrical Steel Maraging Steel Cast Iron  Gray Iron White Iron Malleable Iron Ductile (Nodular) Iron Wrought Iron Ferrous Metallurgy  Iron Carbon Phase Diagram Heat Treatment of Steel  Scale Formation & Prevention Differential Surface Chemistry Processes  Pack Carburizing Selective Surface Heating Processes Steelmaking  Electric Arc Furnace (EAF) See: AIST Steel Wheel Reference Nonferrous Metals  Aluminum  The Aluminum Association Wrought Aluminum Alloy Designation System  1000 Series Aluminum (Pure) 2000 Series Aluminum (Copper) 3000 Series Aluminum (Manganese) 4000 Series Aluminum (Silicon) 5000 Series Aluminum (Magnesium) 6000 Series Aluminum (Magnesium + Silicon) 7000 Series Aluminum (Zinc) Aluminum Standards Copper  Copper Alloys  Free Machining Brass ToughMet Copper-Nickel-Tin Alloys Copper Development Association Magnesium  International Magnesium Association Nickel  Nickel Institute Titanium  International Titanium Association Zinc Atomic Structure of Metals ASM International Industrial Gasses  Acetylene Argon Polymers  Elastomers  Silicone Rubber Ceramics, Glass, and Carbon  Polycrystalline Diamond The American Ceramics Society Wood Products  Lumber – Mechanical Defects Unbleached Kraft Linerboard Engineering Fluids and Lubricants  Petroleum Products  SAE Motor Oil Viscosity Ratings Gasoline (Petrol)  Octane Ratings See Also: Coatings ASTM International Material Geometry and Configurations Manufacturing Processes & Technology  Separating Processes  Machining Processes (Mechanical Separating)  Machine Tools Milling Machines and Operations  Milling Operations, Tools, and Strategies  Climb Milling And Conventional Milling Right and Left Handed End Mills Boring Head – Mill Face Milling Contour Milling DFM – Reducing Costs of Machined Fillets Grinding and Abrasive Machining  Water Jet Cutting Surface Grinding Handheld Grinding Tool and Cutter Grinding Creep Feed Grinding Media Blasting  Shot Blasting and Peening Vapor Blasting Lathes and Turning Operations  Lathe Components and Configurations  Swing Distance Between Centers Spindle Bore Diameter Lathe Operations  Straight Turning Facing Taper Turning Boring Contour Turning Form Turning Parting, Parting Off Drilling on a Lathe  Center Drilling Internal Threading External Threading Grooving or Necking Knurling Drilling and Holemaking  Drill Tip Depth Calculator Drill Press DFM – Hole Design Strategies Machining Parameters  Machining Plastics Machining Titanium Sawing  Band Sawing  Convoluted Foam Cutting (Egg Crate) Shapers and Planers Thermal Separating  Laser Beam Cutting Oxyfuel Gas Cutting Plasma Cutting Air Carbon Arc Gouging Electrical Discharge Machining (EDM)  Wire EDM Sinker (or Ram) EDM Chemical Separating Processes  Photochemical Machining Casting Processes  Casting Terminology  Core (Casting) Sand Casting  Match Plate Pattern Flaskless Casting Sand Casting Procedure Polymer Casting Die Casting  Die Casting Terminology Hot and Cold Chamber Die Casting Machines Continuous Casting  Continuous Upward Casting Centrifugal Casting Rubber Mold Casting Rubber Plaster Mold Casting Forming Processes  Sheet, Wire, and Tube Forming Processes  Section Bending Wire Winding Sheet Metal Processes  Shearing  Right Angle Shearing Slitting (Sheet Metal Process) Punching  Blanking (Sheet Metal Process) Turret Punch Press Bending (Sheet Metal Process)  Sheet Metal Brakes  Automated Bending Centers Press Brakes Incremental Sheet Forming Embossing Spinning Stamping Bulk Forming Processes Power Presses Polymer Processes  Rotational Molding Hot Wire Foam Cutting See Also: Polymer Casting See Also: Machining Plastics Injection Molding  Overmolding Injection Molding Defects  Warpage (Molding Defect) Sink Marks Flash Short Shots Weld Lines Splay Marks Jetting Burn Marks Voids and Air Traps Overpacking Delamination Injection Mold Design and Manufacturing Example Extrusion (Plastics) Composites Manufacturing Processes  Adaptive Mold Technology Compression Molding Blow Molding Surface and Edge Modification  Functional and Decorative Texturing  Half-Moon Flaking Laser Texturing Surface Texture: Roughness, Waviness and Lay  Surface Texture: Lay  Crossed Lay Coatings  Organic Coatings  Primers Drying Oils Varnish  Spirit Varnish (Shellac) Lacquer Enamels Latex Paints Bituminous Coatings Synthetic Coating Resins Coating Methods  Spray Coating Powder Coating Electrocoating (E-Coating) Inorganic Coatings  Conversion Coatings  Aluminum Anodizing Chromate Conversion Coatings  Alodine Iridite Zinc Chromate Coatings Zinc Coatings  Zinc Plating Dyes Cleaning  Ultrasonic Cleaning Solvent Cleaning  Vapor Degreasing Aqueous Cleaning Descaling Processes See Also: Media Blasting Thermal Joining  Welding  Arc Welding  Shielded Metal Arc Welding (SMAW) Flux-Core Arc Welding (FCAW) Gas Metal Arc Welding (GMAW) Submerged Arc Welding (SAW) Arc Stud Welding (SW) Unique Welding Processes  Flash Welding Soldering Glass Processes  Glass Blow Molding Additive Manufacturing  Binder Jetting Processes Directed Energy Deposition Workholding  Layout and Setup Tooling  Layout Dye Sine Bar Bench Block V-Blocks 1-2-3 Blocks Expanding Mandrels Surface Gauge Adjustable Parallels Assembly and Mechanical Joining  Sealing  IP Ratings O-Rings Metrology  Measuring Devices  Reference Standards  Gauge Blocks Surface Plates  Other Granite Master Tools Pin Gauge Hole and Cylinder Measure  Three-Point Micrometer Bore Gauge Inside Hole Calipers Telescoping Bore Gauge Inside Micrometer Small Bore Gauge Coaxial Indicator Graduated Instruments  How to Read a Tape Measure (Inches)  Fractions and Decimals on an Inch Tape Measure Vernier Caliper – Metric Inch Machinist’s Rule – 10 & 100 Comparison Gauges  Feeler Gauge Go-No Go Gauge  Snap Gauge Ring Gauge Flush-Pin Gauge Center Gauge Surface Finish Comparator Optical Comparator (Profile Projector) Radius Gauge Thread Pitch Gauge Optical Flat Calibration and Traceability  NIST – The National Institute of Standards and Technology The Moore M48 Coordinate Measuring Machine Featured ET Alumni Occupational Safety  Safety Data Sheets (SDS) Safety Guidelines  Safety Guidelines – Soldering (Iron Soldering) Machine Shop Safety – Eye Hazards Machine Shop Safety – Entanglement Hazards Machine Shop Safety – Impact Hazards Machine Shop Safety – Crushing Hazards Computer Numerical Control (CNC)  History of CNC Technology  Tracer Lathe & Mills Student Project Examples  Torque-Limiting Tapping Head  Torque-Limiting Floating Tapping Head Video 4th Axis Table Quick Mount Process Validation of an IACV Screw  Eric Ng Additional Project Files Hay Hook  Collin Hill Additional Project Files Mrs. Quackers: An IOT Integrated Duck Sophomore Project – Bike Light Yaskawa HC10 Machine Tending using RFID Machine Tending Lathe Project Yaskawa HC10 Machine Tending with Locus Vector AMR Calculators  Drilling Calculators Threading Calculators About  Privacy Policy Contact Us What is Engineering Technology? Index Terms of Use SME S140 – The University of Memphis

A boring head is a tool that is attached to the spindle of a milling machine. The head holds adjustable boring bars that can be moved in and out to adjust the diameter of the hole being bored. The boring bars are generally held in place with set screws and can be adjusted using a micrometer dial.

220E Voltage / Power / Current 220-240 V / 1400W / 6.1 A No-Load speed 7000 - 10500 r/min Blade holder diameter 48 mm (1.89”) Different bevel angles 30° | 37,5° | 45° Weight 6,7kg (14.8 lbs) Range of use Ø 25mm – 220mm (0.98”- 8.6”) Max. pipe wall 10mm (0.39”) st

PipeCut Bag 3 Exact PipeCut 360 Pro Series pipe saw Pipe Support 360 Double and 2x 360 Single and tool for changing blade in the bag. Operating instructions Hex socket key 5 mm and 2 mm fitted to the machine TCT 165 blade fitted to the machine DVD video disc including instructions

Feb 27, 2012 — Free machining steels are great, they do deliver on good finishes and long tool life. The down side is they rust like crazy. Don't apply them to ...

Band Saws, Sale Off, AMBASSADOR C14 3HP 14, AMBASSADOR C14 3HP 14" Bandsaw With Cast Iron Table, View More, Sale Off, Alpha HW615P 3HP 15.

Pipe Ø (OD) 220E Pipe Ø (OD) 360E 25mm – 220mm (0.98”- 8.6”) 110mm – 360mm (4.33”- 14.17”) Wall thickness 10mm (0.39”) st Cuts the following pipe materials Steel, stainless steel, aluminium

CERMET V155  In Exact PipeCut V1000 we use a specially designed Cermet V155 blade that has 58 extremely durable ceramic alloy tips. It is designed for cutting thin sheet materials such as spiral ducts. Cermet blades can be sharpened a couple of times so they will become like new.

Next, the boring head is attached to the milling machine’s spindle and the boring bars are inserted into the head. The boring bars are adjusted to the desired diameter using the micrometer dial.

TCT 140 Saw Blade will also fit Rothenberger PipeCut 200U & Rothenberger PipeCut Turbo 250 TCT 165 Saw Blade will also fit Rothenberger PipeCut Turbo 400

Your cart is empty. Need some help? Contact us. Continue shopping. Boring Business Systems. 950 E Main St Lakeland, Florida 33801 United States. Contact Us ...

CERMET 140 Saw Blade will also fit Rothenberger PipeCut 200U & Rothenberger PipeCut Turbo 250 CERMET 165 Saw Blade will also fit Rothenberger PipeCut Turbo 400

Technical details Voltage / Current 110V, 120V / 15A Available also in Voltage / Power 230V / 2500W Special Order No-Load speed I=1900 r/min, II=2885 r/min Blade diameter 165mm (6.50”) Mounting bore 62mm (2.44”) Weight 15,5 kg (34,2 lbs) Range of use 50mm – 280mm (2”- 11”) Max. pipe wall 20mm (0.8”) steel / 230V 12mm (0.5") steel / 120V 45mm (2”) plastics Electronical unit Blade speed preselection, automatic fuse, soft start, torque control Speed preselection I = Stainless steel and acid-resistant steel, II = all other materials Loading capacity of supports 465 kg, 1025 lb (3 supports) Set Includes: PipeCut Bag 3 Exact PipeCut 280 Pro Series pipe saw Pipe Support 280, 4pcs Operating instructions Hex socket key 5 mm and 2 mm fitted to the machine TCT 165 blade fitted to the machine DVD video disc including instructions

It is also possible to make different ‘tailored’ bevel angles if required. There is also a stopper feature, that enables the operator to make similar additional bevels to the same pipe O/D.

TCT BLADES Blade with tungsten carbide tips for general use. Suitable for cutting steel, copper, aluminum and plastics. TCT blades can be sharpened a couple of times.

DIAMOND X140 Saw Blade will also fit Rothenberger PipeCut 200U & Rothenberger PipeCut Turbo 250 DIAMOND X165 Saw Blade will also fit Rothenberger PipeCut Turbo 400