Drill through-hardened steel metal at the recommended speed using a drill bit, preferably carbide bits. Larger drill bits require even slower speeds.

In computing for the RPM, for example 1"-diameter tool must run at 30 sfm. Based on the equation above, at 30  sfm: (30 × 3.82) ÷ 1 = 114.6, this means you have to use 115 RPM to drill a 1 inch Rockwell C 40 to 45 steel.

The drill speed is critical for drilling hardened steel. Drilling at high speeds causes high temperatures, which will damage your drill bit. Therefore, drilling hardened steel should be done at a low RPM and feed rate. Feed rates are typically at least 50% lower than for lesser hardness steel. Speeds generally are 30% of that of a non-hardened material.

Measure and mark the hole, then use a center punch and hammer to make a slight indentation. Drill bits tend to wander when they first start drilling. Therefore the dimple helps the drill bit become more steady. The dimple also serves as a reference for where to drill your hole.

If you are short on time, the best drill bits for hardened steel are carbide-tipped bits. They are the most suitable drill bits for hardened steel due to their robust and heat-resistant properties. However, there are other options such as titanium and cobalt.

† In the form of electronic Canadian Tire Money® (CT Money®). You cannot collect paper Canadian Tire Money on bonus offers. Any bonus multiplier is based on the base rate of collecting CT Money. Not all items sold at Canadian Tire earn CT Money. The offered rate is exclusive of any bonus or promotional offers or redemption transactions. CT Money is collected on the pre-tax. Bonus CT Money collected from online orders will be applied to the member’s Triangle Rewards™ account within 5 weeks of the purchase date. Terms and Conditions apply. Visit Triangle Rewards: Sign Up & Earn Today for more information. ®/TMMark’s is a registered trademark of Mark’s Work Warehouse Ltd, used under licence. ®/TMSport Chek is a registered trademark of FGL Sports Ltd, used under licence. ◊Off our original prices. Pricing, selection, and availability of clearance items are determined by each store. Applicable on select styles/sizes. Clearance items may be display models or not exactly as shown. Quantities may be limited and may vary by store. Rainchecks unavailable. We reserve the right to limit quantities. Shop early for greatest selection. Contact your local store for more information. ‡‡Shipping fees apply. Shipping fees and delivery times vary depending on location, size and weight of the item(s) and is only available within the province of the Canadian Tire retail location (“Store”) from which the item(s) was purchased. Bulk items will only be delivered within a 100km radius of the Store. Not available in Recontre East, NL. Conditions and restrictions apply. Visit Online Ordering for more information. ®/™ Mastercard, World Mastercard and World Elite are registered trademarks, and the circles design is a trademark of Mastercard International Incorporated. ®/TM Unless otherwise noted, all trademarks are owned by Canadian Tire Corporation, Limited and are used under license. ◊Off our original price. Quantities may vary by store. Some clearance product and price points may not be available at all locations. ± Was price reflects the last national regular price this product was sold for *The Triangle Rewards Program is owned and operated by Canadian Tire Corporation, Limited. Triangle® credit cards are issued by Canadian Tire Bank. Rewards are in the form of electronic Canadian Tire Money® (CT Money®). To collect bonus CT Money you must present a Triangle Rewards card/key fob, or use any approved Cardless method, at time of purchase or pay with a Triangle credit card. You cannot collect paper Canadian Tire Money on bonus offers. Any bonus multiplier is based on the base rate of collecting CT Money (0.4%), and will be added to whatever the Member would otherwise collect, without the bonus. Example: On a $100 (pre-tax) purchase with a 20x bonus multiplier a Member would earn a bonus $8 in CT Money (20 X .4% X $100). Not all items sold are eligible to earn CT Money or to be redeemed for. Conditions apply. Visit triangle.com for full program rules and Partner location information. The offered rate is exclusive of any bonus or promotional offers or redemption transactions. CT Money is collected on the pre-tax amount of the purchase. Bonus CT Money may take up to 5 weeks to be applied to the Member’s Triangle Rewards Account. No rainchecks. 1 Participating retailers: Canadian Tire, Sport Chek, Mark’s, L’Équipeur, Atmosphere, Party City, Sports Rousseau, Hockey Experts, L’Entrepôt du Hockey and participating Sports Experts stores. ^ CT Money is collected on the number of whole litres of fuel purchased rounded down to the nearest whole litre when you show your Triangle card, mobile App or key fob and pay with cash or debit. Rate subject to change and could vary by location, see local gas bar for details. Not all Gas+ locations have premium fuel. Must go inside kiosk to collect rewards with App or key fob. Conditions apply. Visit triangle.com for full program rules and Partner location information.

*The Triangle Rewards Program is owned and operated by Canadian Tire Corporation, Limited. The Triangle® credit cards are issued by Canadian Tire Bank. Rewards are in the form of electronic Canadian Tire Money® (CT Money®). To collect bonus CT Money you must pay with a Triangle credit card. You cannot collect paper Canadian Tire Money on bonus offers. Any bonus multiplier is based on the base rate of collecting CT Money (0.4%), and will be added to whatever the Member would otherwise collect, without the bonus. Example: On a $100 (pre-tax) purchase with a 20x bonus multiplier a Member would earn a bonus $8 in CT Money (20 X 0.4% X $100). The 30x for Triangle® Mastercard®, World Mastercard® and World Elite® Mastercard® customers consists of the 10x everyday plus a 20x bonus. Not all items sold are eligible to earn CT Money or to be redeemed for. Conditions apply. Visit triangle.com for full program rules and Partner location information. The offered rate is exclusive of any bonus or promotional offers or redemption transactions. CT Money is collected on the pre-tax amount of the purchase. Bonus CT Money may take up to 5 weeks to be applied to the Member’s Triangle Rewards Account. No rainchecks. Must pay with a Triangle credit card. Gift cards and other items excluded.

*NO PURCHASE NECESSARY. Contest begins at 12:00 p.m. Eastern Time (“ET”) on September 19, 2024 and ends at 11:59 p.m. ET on October 3, 2024 after which time the Contest will be closed and no further entries shall be accepted. Open to legal residents of Canada who are a registered Triangle® Loyalty member and who are 18 years old or older. There is one grand prize that consists of a trip for two to attend Game 3 and Game 4 of the MLB World Series with a total approximate retail value (“ARV”) of $25,449.96CAD and one secondary prize consist of a PWR POD gift basket each with an ARV of $449.96 CAD . Winners will be selected through a random electric draw on October 4, 2024. Odds of winning depend upon total number of eligible entries received. Correct answer to mathematical skill-testing question required. Visit

Hardened steel types include ATS34, CPM440V, Z60CDV14,  Sandvic, and 12C27. Carbon steel must go through a succession of heat treatments, quenching, and reheating to become hardened steel.

Lubricant should be applied to both the drill bit and the drilling surface. To reduce the temperature, repeat this step between drillings.

CANADIAN TIRE® and the CANADIAN TIRE Triangle Design are registered trade-marks of Canadian Tire Corporation, Limited. ±Was price reflects the last national regular price this product was sold for. **Online prices and sale effective dates may differ from those in-store and may vary by region. Dealers may sell for less. * Financing available is “Equal payments, no interest” for 24 months (unless otherwise stated) and is only available on request, on approved credit and on purchases of $150 (unless otherwise stated) or more (Gift Cards excluded) made with your Triangle credit card at Canadian Tire, Sport Chek, Mark’s, L’Équipeur, Atmosphere, Sports Rousseau, Hockey Experts, L’Entrepôt du Hockey and participating Sports Experts. Interest does not accrue during the period of the plan. However, if we do not receive the full minimum due on a statement within 59 days of the date of that statement, or any event of default (other than a payment default) occurs under your Cardmember Agreement, all special payment plans on your account will terminate and (i) you will then be charged interest on the balances outstanding on such plans at the applicable regular annual rate from the day after the date of your next statement, and (ii) the balances outstanding will form part of the balance due on that statement. There is no administration fee charged for entering into a special payments plan. Each month during an equal payments plan you are required to pay in full by the due date that month’s equal payments plan instalment. Any unpaid portion not received by the due date will no longer form part of the equal payments plan and interest will accrue on that amount from the day after the date of your next statement at the applicable regular annual rate. Offer subject to change without notice. Additional information for residents of Quebec only: The regular annual rate for persons applying for the Triangle Mastercard and the Triangle World Elite Mastercard is 21.99% for cash transactions and related fees and 21.99% for all other charges. Some applicants may receive a higher or lower regular annual rate depending on a credit evaluation. The minimum payment is the sum of (a) the greater of: (i) interest and fees shown on your statement + $10; or (ii) 5% of the New Balance, excluding amounts on special payment plans, (b) any balance over your credit limit, (c) any amounts past due not included in (b) above, and (d) the amount of any equal payments plan instalments then due. Balances under $10 are due in full. For residents of Quebec, the period between the statement date and the due date for payment is 26 days. The billing period covered by each statement can be from 28-33 days. The Triangle Mastercard and the Triangle World Elite Mastercard do not have an annual fee. Examples of borrowing costs (rounded to the nearest cent) assuming that all charges are purchases bearing interest at the regular annual rate of 21.99%, a 30 day month, no charges made on special payment plans and no other fees, additional payments or other changes are:

For better protection, use safety glasses that wrap around the sides of your face. Eye protection is required to ensure that a tiny metal fragment does not cause significant eye injury.

Rockwell hardness testing is a standard method for determining the  hardness of metals and polymers. Rockwell hardness is measured with a device known as a Rockwell hardness tester. The tougher the steel is, the higher the number on the RC scale. The higher the RC number, the slower the drill speed should be.

Cobalt has a high melting point of 1495°C, making it ideal for high heat drilling applications like hardened steel. The most common are M35, a 5% alloy, and M42, a 7% alloy.

Titanium nitride (TiN) is a very strong ceramic substance that protects the steel bit and allows it to last longer, especially when drilling hardened steel.

Titanium drill bits are high-speed steel bits with a titanium nitride (TiN) coating, whereas cobalt drill bits do not have a coating; the entire bit is constructed of alloy steel that contains 5 to 8% cobalt.

*The Triangle Rewards Program is owned and operated by Canadian Tire Corporation, Limited. The Triangle® credit cards are issued by Canadian Tire Bank. Rewards are in the form of electronic Canadian Tire Money® (CT Money®). To collect bonus CT Money you must present a Triangle Rewards card/key fob, or use any approved Cardless method, at time of purchase or pay with a Triangle credit card. You cannot collect paper CT Money on bonus offers. Minimum $150 spend is on the pre-tax amount on the same tender and for a single transaction. $150 must be spent on items that earn CT Money. Not all items sold at Canadian Tire are eligible to earn CT Money or to be redeemed for. Conditions apply. Visit triangle.com for full program rules and Partner location information. The offered rate is exclusive of any bonus or promotional offers or redemption transactions. CT Money is collected on the pre-tax amount of the purchase. Bonus CT Money may take up to 5 weeks to be applied to the Member’s Triangle Rewards Account. No rainchecks. Single use only per Triangle Rewards Account.

Place your order online and receive order confirmation and shipping updates99% of our products are despatched same day from stock.

Carbide drill bits are used for drilling broken bolts, safes, studs, bearing races, taps, and knives made from hardened steel. They are designed to allow the quick dissipation of heat and prevent chipping.

®/™ Mastercard, World Mastercard, World Elite and the circles are registered trademarks of Mastercard International Incorporated.

If you are in the process of drilling hardened steel, maybe for one of the reasons mentioned above, or potentially something completely different, why not take a look at the drill bits we have available for metal. Our range is designed for high end performance and is suitable for those drilling hardened and normal stainless steel.

Make sure the piece of metal is in a flat and secure area. Holding the metal with one hand while running the drill with the other is not a good idea. It is better to secure the metal with a clamp.

There are many other things to consider when choosing the right drill bit for hardened steel. This post will cover what you need to know about drilling hardened steel and provide you with some suggestions on the best drill bits that will work well for your needs.

Carbide drill bits are typically harder than cobalt drill bits, although both are suitable for drilling stainless steel and other hard metals. However, Carbide drill bits retain their sharpness for a longer period than cobalt drill bits. They can also be utilized at a faster cutting rate and withstand higher temperatures than cobalt drill bits.

If you've worked with hardened steel before, you'll know that a regular drill bit won't cut through. Your best bet is to use the carbide bits because they are the hardest drill bits available.

Carbide drill bits are the toughest drill bits available and best for drilling hardened steel. Carbide is a  compound made from tungsten and carbon. Carbide drill bits are typically composed of steel that has a carbide tip.

However, it would be best to exercise caution when using carbide-tipped drills since they can be brittle despite being the hardest. Because of their great strength, they are extensively employed in industrial applications. They can cut through concrete, masonry, tile, and hardened steel.

Cobalt drill bits are not made of pure cobalt. Instead, they are made of steel combined with a small proportion of cobalt, often between 5 and 7 percent, and the remaining part steel.

When comparing the carbide, both cobalt and titanium drill bits are better than regular steel drill bits due to their added components, as well as their resistance to heat and wear. However, in terms of hardness and longevity, the carbide drill bit is better than both of them.

Titanium drill bits are high-speed steel bits with a titanium nitride covering. Titanium-coated drill bits provide many advantages over ordinary steel bits, including the ability to endure greater temperatures, increased wear resistance, and higher durability.

*$9.99 + tax delivery fee.  Select your store and enter postal code on the product page while shopping to determine if same day delivery is available.  Products must meet certain cube/weight dimensions and distance from store must be less than 10km.  For full terms/conditions, visit https://www.canadiantire.ca/en/customer-service/online-ordering.html  *Free at the majority of stores. Some stores may require a minimum order value (before taxes). Orders that do not meet the minimum order value will be subject to a fee.  Orders ready typically within 24 hours. Wait for Ready for Pick Up email before proceeding to store. **$9.99 + tax delivery fee. Select your store and enter postal code on the product page while shopping to determine if same day delivery is available. Products must meet certain cube/weight dimensions and distance from store must be less than 10km. For full terms/conditions, visit https://www.canadiantire.ca/en/customer-service/online-ordering.html

When drilling through hardened steel, you must ensure that your drill bit is made from tougher materials. Carbide bits are the strongest drill bits material and can cut through hardened steel. But if they are not available, titanium and cobalt drill bits can also be used. However, drilling with either of these bits will take longer than drilling with a carbide drill bit.

Hardened steel is used in energy,  transportation, general mechanical engineering components, and many other applications. Axles, arbors, driving pinions, camshafts, and Cardan joints are examples of hardened steel components.

Therefore, cobalt drill bits have a longer life and are more heat resistant than titanium drill bits. Which means cobalt drill bits are typically better since they are much more durable than titanium-coated bits and can drill holes through the hardest metals.

All orders placed before 5:00pm Monday to Thursday and 3:00pm Friday will be dispatched on a next day carrier service. Carriage is free on all orders over £50 (Excluding VAT), if below £50 then next day delivery is £6.50