Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.

How to put nails into concretedriveway

20231130 — If you're drilling through hardened steel, you'll want to use a cobalt drill bit. Find out about the best drill bits for hardened steel in ...

This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

How to put nails into concretewall

These bolts are also used for hanging wood parts (along with light fixtures and shower curtain rods) in areas between wood framing members inside walls. Toggle bolts are stronger than nails, with a shear rating between 550 and 1,700 pounds, but they’re not as strong as concrete screws. Steel anchor Heavy-Duty Anchors When fasteners are used to support horizontal beams on vertical surfaces, such as ledgers that support deck framing on the side of a concrete wall, they need to be strong. The best option for this work is to use steel anchors and matching lag screws. Matching lag screw These fasteners have shear ratings much higher than other choices — in some cases, up to 7,000 pounds. The anchors are installed in predrilled holes in the concrete that match the size of the lag screw being used. The anchor packaging identifies the correct screw size. Because these anchors have relatively large diameters, a standard VSR drill with a concrete bit doesn’t match the job. A ½-inch hammer drill is a much better choice. These tools outperform regular drills because they have a hammering feature that makes the bit reciprocate in and out while it turns. This hammering action helps break up the concrete in the bit’s path, which makes it easier to drill away the extra concrete when attaching wood to concrete. Spiral concrete bit and 7-inch cordless drill Boring Holes in Concrete A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

SolidCAM's unique, revolutionary iMachining technology saves 70% and more in CNC machining time and extends tool life drastically. Using its patented Technology Wizard, iMachining provides optimal feeds & speeds based on tool path, stock material, type of cutting tool and CNC machine specifications.iMachining gives you unbelievable savings and increased efficiency in your CNC milling operations, turning out extremely high profits. Worldwide, iMachining customers have a HUGE competitive advantage.

MasonryNails

The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

How to puta nail in a brick wall without a drill

ACME Threaded Rods, or ACME Lead Screws, 29° thread angle, increased wear resistance and higher load capabilities. Available with OD from 1/4" to 2 1/2".

Concrete Decor is a valuable source of information, ideas, product news and training relevant to both commercial and residential work in decorative concrete and related specialties.

Concrete nails

Dec 22, 2022 — So far I'm really loving my new 4hp dovetail table saw from Harvey. ... Canada. Manage Consent. California Consumer Privacy Act (CCPA) Opt-Out ...

With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

Because of the prevalence of concrete block construction, hollow wall fasteners come into play on many jobs. They are installed by drilling a hole into the block until a void inside the block is reached. Then the two side wings on the bolt are squeezed together and pushed into the hole. When they enter the block void, the wings spread out again and can’t be pulled from the hole. These bolts are also used for hanging wood parts (along with light fixtures and shower curtain rods) in areas between wood framing members inside walls. Toggle bolts are stronger than nails, with a shear rating between 550 and 1,700 pounds, but they’re not as strong as concrete screws. Steel anchor Heavy-Duty Anchors When fasteners are used to support horizontal beams on vertical surfaces, such as ledgers that support deck framing on the side of a concrete wall, they need to be strong. The best option for this work is to use steel anchors and matching lag screws. Matching lag screw These fasteners have shear ratings much higher than other choices — in some cases, up to 7,000 pounds. The anchors are installed in predrilled holes in the concrete that match the size of the lag screw being used. The anchor packaging identifies the correct screw size. Because these anchors have relatively large diameters, a standard VSR drill with a concrete bit doesn’t match the job. A ½-inch hammer drill is a much better choice. These tools outperform regular drills because they have a hammering feature that makes the bit reciprocate in and out while it turns. This hammering action helps break up the concrete in the bit’s path, which makes it easier to drill away the extra concrete when attaching wood to concrete. Spiral concrete bit and 7-inch cordless drill Boring Holes in Concrete A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

These fasteners have shear ratings much higher than other choices — in some cases, up to 7,000 pounds. The anchors are installed in predrilled holes in the concrete that match the size of the lag screw being used. The anchor packaging identifies the correct screw size. Because these anchors have relatively large diameters, a standard VSR drill with a concrete bit doesn’t match the job. A ½-inch hammer drill is a much better choice. These tools outperform regular drills because they have a hammering feature that makes the bit reciprocate in and out while it turns. This hammering action helps break up the concrete in the bit’s path, which makes it easier to drill away the extra concrete when attaching wood to concrete. Spiral concrete bit and 7-inch cordless drill Boring Holes in Concrete A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

Hardened screws can be driven into concrete as long as you first drill a proper-sized clearance hole. These screws come in a wide variety of shank diameters and lengths, along with several head designs, including Phillips, slotted and heavy-duty hex. Typically, a package of these screws comes with a masonry drill bit sized to the screw diameter. Toggle Bolts To install them, position the wood part in place. Drill a clearance hole through the wood and into the concrete using a masonry drill. This is usually a much easier job than driving nails by hand. The shear strength is much higher, too — about two to four times as much, depending on diameter and length. Toggle Bolts Because of the prevalence of concrete block construction, hollow wall fasteners come into play on many jobs. They are installed by drilling a hole into the block until a void inside the block is reached. Then the two side wings on the bolt are squeezed together and pushed into the hole. When they enter the block void, the wings spread out again and can’t be pulled from the hole. These bolts are also used for hanging wood parts (along with light fixtures and shower curtain rods) in areas between wood framing members inside walls. Toggle bolts are stronger than nails, with a shear rating between 550 and 1,700 pounds, but they’re not as strong as concrete screws. Steel anchor Heavy-Duty Anchors When fasteners are used to support horizontal beams on vertical surfaces, such as ledgers that support deck framing on the side of a concrete wall, they need to be strong. The best option for this work is to use steel anchors and matching lag screws. Matching lag screw These fasteners have shear ratings much higher than other choices — in some cases, up to 7,000 pounds. The anchors are installed in predrilled holes in the concrete that match the size of the lag screw being used. The anchor packaging identifies the correct screw size. Because these anchors have relatively large diameters, a standard VSR drill with a concrete bit doesn’t match the job. A ½-inch hammer drill is a much better choice. These tools outperform regular drills because they have a hammering feature that makes the bit reciprocate in and out while it turns. This hammering action helps break up the concrete in the bit’s path, which makes it easier to drill away the extra concrete when attaching wood to concrete. Spiral concrete bit and 7-inch cordless drill Boring Holes in Concrete A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

Concretenail gun

Because these anchors have relatively large diameters, a standard VSR drill with a concrete bit doesn’t match the job. A ½-inch hammer drill is a much better choice. These tools outperform regular drills because they have a hammering feature that makes the bit reciprocate in and out while it turns. This hammering action helps break up the concrete in the bit’s path, which makes it easier to drill away the extra concrete when attaching wood to concrete. Spiral concrete bit and 7-inch cordless drill Boring Holes in Concrete A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

Specifications. ANSI Insert Code, DCGW32.51. ISO Insert Code, DCGW11T304. Relief Angle, 7. Insert Style, DCGW. Corner Radius (Inch), 1/64. Corner Radius ( ...

Steve Willson was the home improvement editor for Popular Mechanics magazine for 22 years, following a career at the helm of his own carpentry contracting business in Rochester, New York. He has also authored three books about home improvement and tools and writes frequently for The Home Depot.

How to put nails into concretefloor

A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

The cut nail has a square, tapered shape with a square tip. These nails are driven through a board and into concrete underneath, much like nailing a wood board to a wood floor. These nails are cheap, hold well (as long as they penetrate at least ¾ inch into the concrete) and are extremely hard to pull out. Concrete nail Concrete nails are shaped like thick common nails. The shaft is surrounded with striations to improve holding power, and the steel is hardened so that it won’t bend when it hits the concrete. Like cut nails, these are affordable, hold very well and are difficult to remove. Both types require stout, accurate hammering and have a shear strength of 500 to 600 pounds. Screws Hardened screws can be driven into concrete as long as you first drill a proper-sized clearance hole. These screws come in a wide variety of shank diameters and lengths, along with several head designs, including Phillips, slotted and heavy-duty hex. Typically, a package of these screws comes with a masonry drill bit sized to the screw diameter. Toggle Bolts To install them, position the wood part in place. Drill a clearance hole through the wood and into the concrete using a masonry drill. This is usually a much easier job than driving nails by hand. The shear strength is much higher, too — about two to four times as much, depending on diameter and length. Toggle Bolts Because of the prevalence of concrete block construction, hollow wall fasteners come into play on many jobs. They are installed by drilling a hole into the block until a void inside the block is reached. Then the two side wings on the bolt are squeezed together and pushed into the hole. When they enter the block void, the wings spread out again and can’t be pulled from the hole. These bolts are also used for hanging wood parts (along with light fixtures and shower curtain rods) in areas between wood framing members inside walls. Toggle bolts are stronger than nails, with a shear rating between 550 and 1,700 pounds, but they’re not as strong as concrete screws. Steel anchor Heavy-Duty Anchors When fasteners are used to support horizontal beams on vertical surfaces, such as ledgers that support deck framing on the side of a concrete wall, they need to be strong. The best option for this work is to use steel anchors and matching lag screws. Matching lag screw These fasteners have shear ratings much higher than other choices — in some cases, up to 7,000 pounds. The anchors are installed in predrilled holes in the concrete that match the size of the lag screw being used. The anchor packaging identifies the correct screw size. Because these anchors have relatively large diameters, a standard VSR drill with a concrete bit doesn’t match the job. A ½-inch hammer drill is a much better choice. These tools outperform regular drills because they have a hammering feature that makes the bit reciprocate in and out while it turns. This hammering action helps break up the concrete in the bit’s path, which makes it easier to drill away the extra concrete when attaching wood to concrete. Spiral concrete bit and 7-inch cordless drill Boring Holes in Concrete A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

Representative schematic showing the loading and running of SDS-PAGE gel for electrophoresis. SDS-PAGE Gel Electrophoresis Protocol. Prepare or purchase a ...

Concrete is not the easiest material to work with, especially if you’re trying to build a structure (like a house) that involves the use of both concrete and wood products. Fortunately, there are many ways to make the transition from concrete floors and wall frames to wood floors and drywall. Most masonry contractors have their favorites when it comes to attaching wood to concrete, but the newer members of the crew might not. The following is a breakdown of the pros and cons of four versatile fasteners most often used for attaching wood to concrete. Cut nail Nails The easiest approach is simply to nail the wood to the concrete. Two common nail options are shown below: the cut nail and the concrete nail. The cut nail has a square, tapered shape with a square tip. These nails are driven through a board and into concrete underneath, much like nailing a wood board to a wood floor. These nails are cheap, hold well (as long as they penetrate at least ¾ inch into the concrete) and are extremely hard to pull out. Concrete nail Concrete nails are shaped like thick common nails. The shaft is surrounded with striations to improve holding power, and the steel is hardened so that it won’t bend when it hits the concrete. Like cut nails, these are affordable, hold very well and are difficult to remove. Both types require stout, accurate hammering and have a shear strength of 500 to 600 pounds. Screws Hardened screws can be driven into concrete as long as you first drill a proper-sized clearance hole. These screws come in a wide variety of shank diameters and lengths, along with several head designs, including Phillips, slotted and heavy-duty hex. Typically, a package of these screws comes with a masonry drill bit sized to the screw diameter. Toggle Bolts To install them, position the wood part in place. Drill a clearance hole through the wood and into the concrete using a masonry drill. This is usually a much easier job than driving nails by hand. The shear strength is much higher, too — about two to four times as much, depending on diameter and length. Toggle Bolts Because of the prevalence of concrete block construction, hollow wall fasteners come into play on many jobs. They are installed by drilling a hole into the block until a void inside the block is reached. Then the two side wings on the bolt are squeezed together and pushed into the hole. When they enter the block void, the wings spread out again and can’t be pulled from the hole. These bolts are also used for hanging wood parts (along with light fixtures and shower curtain rods) in areas between wood framing members inside walls. Toggle bolts are stronger than nails, with a shear rating between 550 and 1,700 pounds, but they’re not as strong as concrete screws. Steel anchor Heavy-Duty Anchors When fasteners are used to support horizontal beams on vertical surfaces, such as ledgers that support deck framing on the side of a concrete wall, they need to be strong. The best option for this work is to use steel anchors and matching lag screws. Matching lag screw These fasteners have shear ratings much higher than other choices — in some cases, up to 7,000 pounds. The anchors are installed in predrilled holes in the concrete that match the size of the lag screw being used. The anchor packaging identifies the correct screw size. Because these anchors have relatively large diameters, a standard VSR drill with a concrete bit doesn’t match the job. A ½-inch hammer drill is a much better choice. These tools outperform regular drills because they have a hammering feature that makes the bit reciprocate in and out while it turns. This hammering action helps break up the concrete in the bit’s path, which makes it easier to drill away the extra concrete when attaching wood to concrete. Spiral concrete bit and 7-inch cordless drill Boring Holes in Concrete A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

To install them, position the wood part in place. Drill a clearance hole through the wood and into the concrete using a masonry drill. This is usually a much easier job than driving nails by hand. The shear strength is much higher, too — about two to four times as much, depending on diameter and length. Toggle Bolts Because of the prevalence of concrete block construction, hollow wall fasteners come into play on many jobs. They are installed by drilling a hole into the block until a void inside the block is reached. Then the two side wings on the bolt are squeezed together and pushed into the hole. When they enter the block void, the wings spread out again and can’t be pulled from the hole. These bolts are also used for hanging wood parts (along with light fixtures and shower curtain rods) in areas between wood framing members inside walls. Toggle bolts are stronger than nails, with a shear rating between 550 and 1,700 pounds, but they’re not as strong as concrete screws. Steel anchor Heavy-Duty Anchors When fasteners are used to support horizontal beams on vertical surfaces, such as ledgers that support deck framing on the side of a concrete wall, they need to be strong. The best option for this work is to use steel anchors and matching lag screws. Matching lag screw These fasteners have shear ratings much higher than other choices — in some cases, up to 7,000 pounds. The anchors are installed in predrilled holes in the concrete that match the size of the lag screw being used. The anchor packaging identifies the correct screw size. Because these anchors have relatively large diameters, a standard VSR drill with a concrete bit doesn’t match the job. A ½-inch hammer drill is a much better choice. These tools outperform regular drills because they have a hammering feature that makes the bit reciprocate in and out while it turns. This hammering action helps break up the concrete in the bit’s path, which makes it easier to drill away the extra concrete when attaching wood to concrete. Spiral concrete bit and 7-inch cordless drill Boring Holes in Concrete A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

2%-3% of the reamer diameter will normally be appropriate stock removal when reaming. ... See Pre-Ream Drill Size Chart on page 26. Runout (TIR) Concerns: One ...

How tohammer nailinto concretewall without drill

Concrete nails are shaped like thick common nails. The shaft is surrounded with striations to improve holding power, and the steel is hardened so that it won’t bend when it hits the concrete. Like cut nails, these are affordable, hold very well and are difficult to remove. Both types require stout, accurate hammering and have a shear strength of 500 to 600 pounds. Screws Hardened screws can be driven into concrete as long as you first drill a proper-sized clearance hole. These screws come in a wide variety of shank diameters and lengths, along with several head designs, including Phillips, slotted and heavy-duty hex. Typically, a package of these screws comes with a masonry drill bit sized to the screw diameter. Toggle Bolts To install them, position the wood part in place. Drill a clearance hole through the wood and into the concrete using a masonry drill. This is usually a much easier job than driving nails by hand. The shear strength is much higher, too — about two to four times as much, depending on diameter and length. Toggle Bolts Because of the prevalence of concrete block construction, hollow wall fasteners come into play on many jobs. They are installed by drilling a hole into the block until a void inside the block is reached. Then the two side wings on the bolt are squeezed together and pushed into the hole. When they enter the block void, the wings spread out again and can’t be pulled from the hole. These bolts are also used for hanging wood parts (along with light fixtures and shower curtain rods) in areas between wood framing members inside walls. Toggle bolts are stronger than nails, with a shear rating between 550 and 1,700 pounds, but they’re not as strong as concrete screws. Steel anchor Heavy-Duty Anchors When fasteners are used to support horizontal beams on vertical surfaces, such as ledgers that support deck framing on the side of a concrete wall, they need to be strong. The best option for this work is to use steel anchors and matching lag screws. Matching lag screw These fasteners have shear ratings much higher than other choices — in some cases, up to 7,000 pounds. The anchors are installed in predrilled holes in the concrete that match the size of the lag screw being used. The anchor packaging identifies the correct screw size. Because these anchors have relatively large diameters, a standard VSR drill with a concrete bit doesn’t match the job. A ½-inch hammer drill is a much better choice. These tools outperform regular drills because they have a hammering feature that makes the bit reciprocate in and out while it turns. This hammering action helps break up the concrete in the bit’s path, which makes it easier to drill away the extra concrete when attaching wood to concrete. Spiral concrete bit and 7-inch cordless drill Boring Holes in Concrete A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

This video demonstrates SolidCAM iMachining's 3D capabilities. See how a Ski Goggles mold made from 16MnCr5 European Steel (155x100x40 mm) using a Carbide Endmill in approximately 5 minutes. iMachining is revolutionizing the CAM Software industry.

Metric O Ring Groove Design Reference Guide shop, O Ring Groove Design ... O Ring boxes shop, O Ring Groove Design Dovetail Seal Design Inc shop. o ...

Ace Makerspace · HSS 2 Flute Double End Mill – 1/4″ x 3/8″. $7.48 +tax.

This video demonstrates SolidCAM iMachining's 3D capabilities. See iMachining cut Toolox 44 (Stock: 200 x 100 mm | Height: 35 mm), 1 setup in 7 minutes. iMachining is revolutionizing the CAM Software industry.

The easiest approach is simply to nail the wood to the concrete. Two common nail options are shown below: the cut nail and the concrete nail. The cut nail has a square, tapered shape with a square tip. These nails are driven through a board and into concrete underneath, much like nailing a wood board to a wood floor. These nails are cheap, hold well (as long as they penetrate at least ¾ inch into the concrete) and are extremely hard to pull out. Concrete nail Concrete nails are shaped like thick common nails. The shaft is surrounded with striations to improve holding power, and the steel is hardened so that it won’t bend when it hits the concrete. Like cut nails, these are affordable, hold very well and are difficult to remove. Both types require stout, accurate hammering and have a shear strength of 500 to 600 pounds. Screws Hardened screws can be driven into concrete as long as you first drill a proper-sized clearance hole. These screws come in a wide variety of shank diameters and lengths, along with several head designs, including Phillips, slotted and heavy-duty hex. Typically, a package of these screws comes with a masonry drill bit sized to the screw diameter. Toggle Bolts To install them, position the wood part in place. Drill a clearance hole through the wood and into the concrete using a masonry drill. This is usually a much easier job than driving nails by hand. The shear strength is much higher, too — about two to four times as much, depending on diameter and length. Toggle Bolts Because of the prevalence of concrete block construction, hollow wall fasteners come into play on many jobs. They are installed by drilling a hole into the block until a void inside the block is reached. Then the two side wings on the bolt are squeezed together and pushed into the hole. When they enter the block void, the wings spread out again and can’t be pulled from the hole. These bolts are also used for hanging wood parts (along with light fixtures and shower curtain rods) in areas between wood framing members inside walls. Toggle bolts are stronger than nails, with a shear rating between 550 and 1,700 pounds, but they’re not as strong as concrete screws. Steel anchor Heavy-Duty Anchors When fasteners are used to support horizontal beams on vertical surfaces, such as ledgers that support deck framing on the side of a concrete wall, they need to be strong. The best option for this work is to use steel anchors and matching lag screws. Matching lag screw These fasteners have shear ratings much higher than other choices — in some cases, up to 7,000 pounds. The anchors are installed in predrilled holes in the concrete that match the size of the lag screw being used. The anchor packaging identifies the correct screw size. Because these anchors have relatively large diameters, a standard VSR drill with a concrete bit doesn’t match the job. A ½-inch hammer drill is a much better choice. These tools outperform regular drills because they have a hammering feature that makes the bit reciprocate in and out while it turns. This hammering action helps break up the concrete in the bit’s path, which makes it easier to drill away the extra concrete when attaching wood to concrete. Spiral concrete bit and 7-inch cordless drill Boring Holes in Concrete A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

When fasteners are used to support horizontal beams on vertical surfaces, such as ledgers that support deck framing on the side of a concrete wall, they need to be strong. The best option for this work is to use steel anchors and matching lag screws. Matching lag screw These fasteners have shear ratings much higher than other choices — in some cases, up to 7,000 pounds. The anchors are installed in predrilled holes in the concrete that match the size of the lag screw being used. The anchor packaging identifies the correct screw size. Because these anchors have relatively large diameters, a standard VSR drill with a concrete bit doesn’t match the job. A ½-inch hammer drill is a much better choice. These tools outperform regular drills because they have a hammering feature that makes the bit reciprocate in and out while it turns. This hammering action helps break up the concrete in the bit’s path, which makes it easier to drill away the extra concrete when attaching wood to concrete. Spiral concrete bit and 7-inch cordless drill Boring Holes in Concrete A concrete drill bit and a typical VSR drill are all that’s required to install concrete nails and screws — and even some small-diameter toggle bolts. The fastener packaging will explain what diameter bit should be used for the fastener to work properly. Large-diameter masonry bit and ½-inch hammer drill Large-diameter holes are required for big toggle bolts and almost all anchors. Typically, these bits have carbide tips to prolong tool life and are driven with a heavy-duty hammer drill. This tool turns the bit as other drills do. But, it also has a percussion feature that makes the concrete easier to drill. The fastest and easiest way to attach most wood parts to concrete is to use a powder-actuated gun. To use it, load a special gun nail and a .22 caliber gun shell into the barrel. Press the nose against the workpiece, pull the trigger and the shell will drive the fastener directly into the concrete. No predrilling or elaborate measuring and layout are needed to position the fastener — just hold the board against the concrete and fire the tool. Gun nail, gun shells and powder-actuated gun This gun costs more than a decent drill (as much as $200 more), but it makes light work of most jobs. Before you reach for this tool, read the operators’ manual carefully. This will ensure you’re using the correct amount of powder and the right size fasteners. Always wear eye goggles and ear protection when using a powder-actuated gun. With the right tools and fasteners, it’s easy to fasten wood to concrete in home construction projects. Got more questions about your project? Question*Do you have a project photo that you would like to share with us? Drop files here or Select files Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB. Allowed formats: jpeg, jpg, gif, png, pdfFirst Name Last Name Your Role*Please selectContractorDIYDesignerArchitectOtherHow would you like us to respond?Email* Phone Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers. Related Tips to Protect Concrete Anchors From Damage ConFast Threaded Rod Anchor Now Available for Purchase Simpson Strong-Tie Brings Code-Listed, Project-Tested Structural Solutions to World of Concrete

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognizing you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

2024102 — While mild steel has a lower tensile strength than other carbon steel types, it is more pliable and easier to form. You can also harden mild ...

In this video, we demonstrate SolidCAM iMachining's 3D capabilities. Watch mold part roughing from 16MnCr5 European Steel (180x130x55 mm) using a Carbide Endmill in under 5 minutes. iMachining is revolutionizing the CAM Software industry.

Drill Bit Size Chart ; 3 mm, 0.1181, 3 ; #31, 0.12, 3.048 ; 3.1 mm, 0.1221, 3.1 ; 1/8 in, 0.125, 3.175 ...