CNC Router Machine - Calculating Feeds and Speeds - speed and feed formula

2024-11-16 04:15:46

High polish turning with MCD Inserts, tipped with monocrystalline diamond (MCD) and special tool holders based on systems 117 and 105 for mirror turning. The surface roughness Rz is ...

... Optimized for external turning Longitudinal turning Face turning Profiling Roughing to finishing External turning of medium to large components ...

{"Number of Flutes":"-","Chamfer Length - Inch":["0.07874","0.098425","0.11811","0.137795"],"Overall Length - Metric (L)":["100","150"],"Square Width - Metric (k)":["4.5","5","5.5","6.5"],"Major Diameter - Metric":["6","8","10","12"],"Tap Drill Size Max - Metric":["5.592","7.49","9.388","9.49","11.286","11.388","11.49"],"Shank Diameter - Metric (d)":["6","6.2","7","8.5"],"Pitch":["1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["29"],"Tap Drill Size Min - Metric":["5.49","7.363","9.235","9.363","11.108","11.235","11.363"],"Square Length - Metric (Ik)":["7","8","9"],"Thread Length - Metric (Lc)":["19","22","24","29"],"View Catalog Page":"Here","Coolant Thru":"No","Benefit 3":"Provides High hardness with improved wear resistance and Increased production levels with longer tool life.","Chamfer Type":"Bottom (2P)","Brand":"EXOCARB","Aluminum : 6061; 7075":"N; Best","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Aluminum : Casting":"N; Best","Benefit 2":"Greater reach capability","Cutting Speed (SFM) - Aluminum : Casting":"50-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Feature 2":"Long Shank","Feature 1":"Micrograin carbide body","Cutting Direction":"RH","Product Category":"Forming","Interrupted Thread":"No","Full Description":"The EXOCARB Carbide Forming Taps are design to excel in Cast iron and Aluminum. TiAIN and TiCN coatings are available upon requests for an extended tool life.","Feature 3":"TiCN and TiALN coatings available upon requests","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,64","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","List Name":"OT-LT-NRT","Web Literature 4":"800389CA","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Substrate":"Carbide","STI Thread":"No","Product Overview":"Forming Tap, Long Shank, JIS","Thread Limit":["RH7","RH8"],"Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Short Description":"Tungsten Carbide Forming Taps","Thread Size - Metric":["M6","M8","M10","M12"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"29mm","Taper-Sizes":"-","Overall-Sizes":"100mm - 150mm","Shank-Sizes":"6mm - 8.5mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20357/Taps_-_Tap_-_EXOCARB_-_List_357_-_Forming_Taps_-_Catalog"],"Friendly Name":"357"}

Carbide inserts manufacturersusa

CBN Inserts - Grade CTB H15 - for machining hardened steels Extrême demands are placed on tools used for hard machining. The cost and service life of tools play a significant rôle. The new CTB H15 ...

CNC Backspotfacers, Backspotchamfers and Front/Backspotchamfers with Indexable Inserts Range: See PDF file for complete information

A new generation turning grade has been launched, offering one of the highest levels of productivity and versatility in the market today. The Pramet T9415 is the most advanced MT-CVD grade ...

{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985"],"Chamfer Length - Inch":["0.034448","0.03937","0.044291","0.029527","0.049212","0.035433","0.059055","0.041338","0.068897","0.047244","0.07874","0.098425","0.073818","0.123031","0.088582","0.147637","0.103346","0.172244"],"Major Diameter - Metric":["1.6","1.7","2","2.5","2.6","3","3.5","4","5","6","8","10","12"],"Overall Length - Metric (L)":["41.3","42.9","44.5","46","47.6","49.2","50.8","54","60.3","63.5","69.1","74.6","85.7"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218"],"Tap Drill Size Max - Metric":["1.457","1.557","1.837","2.316","2.416","2.796","3.255","3.714","4.674","5.592","7.49","9.592","9.388","11.286","9.49"],"Pitch":["0.35","0.4","0.45","0.5","0.6","0.7","0.8","1","1.25","1.5","1.75"],"Tap Drill Size Min - Metric":["1.422","1.522","1.796","2.271","2.371","2.745","3.194","3.643","4.592","5.49","7.363","9.49","9.235","11.108","9.363"],"Neck Length - Metric (L1)":["8.9","10.5","12.1","13.8","13.7","16","17.5","19.6","22.2","25.4","28.6","31.8","49"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125"],"Thread Length - Metric (Lc)":["7.9","9.5","11.1","12.8","12.7","6.2","8.4","9.6","12","15","18","21"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)"],"Brand":"EXOTAP","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"15-30","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"10-15","Hardened Steels : 35 HRC":"H; Good","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-130","Cutting Speed (SFM) - Die Steels":"15-20","Cutting Speed (SFM) - Aluminum : Casting":"65-130","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Cutting Speed (SFM) - High Carbon Steel : 1065":"15-30","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Stainless Steels : 300":"15-50","Cutting Speed (SFM) - Stainless Steels : 400":"15-50","Interrupted Thread":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Full Description":"EXOTAP NRT Taps Performance Form Taps for Materials < 32Rc","Meets 2B Class of Fit":"No","Web Literature 1":["8002024CA-TP,68","8002024CA-TP,69"],"Meets 3B Class of Fit":"No","High Carbon Steel : 1065":"P; Best","List Name":"VP-NRT","Thread Type":["M","MF"],"Web Literature 4":"800389CA","STI Thread":"No","Product Overview":"CPM, V-coating","Thread Limit":["D3","D5","D4","D6","D7","D8","D9","D10","D11"],"Stainless Steels : 300":"M; Best","Low Carbon Steel : 1010; 1018":"P; Best","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Good","Short Description":"Premium Powder Metal High Speed Steel","Meets 4H Class of Fit":["Yes","No"],"Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M1.6","M1.7","M2","M2.5","M2.6","M3","M3.5","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"8.9mm - 49mm","Taper-Sizes":"-","Overall-Sizes":"41.3mm - 85.7mm","Shank-Sizes":"3.5814mm - 9.6774mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014150/Taps_-_Tap_-_EXOTAP_NRT_-_List_14150_-_Forming_Taps_-_Catalog"],"Friendly Name":"14150"}

... general purpose steel turning grade suitable for medium to light turning applications including the removal of outer skin, plus our new chip breakers NGE and NSE for optimised chip control ...

These inserts from Sau is among a wide range of products named SHG. These items are best used with their tooling products that may be indexed. Moreover, this range offers operators with products that are ideally used ...

{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.8608","4.8514","6.0452","7.2644","6.985","8.1788","10.3124","11.2268","13.2842","14.478","15.24","17.0688"],"Chamfer Length - Inch":["0.03937","0.044291","0.049212","0.068897","0.07874","0.098425","0.123031","0.147637","0.172244","0.19685","0.246062","0.295275"],"Major Diameter - Metric":["2","2.5","3","4","5","6","8","10","12","14","16","18","20","22","24"],"Overall Length - Metric (L)":["50","56","63","70","80","90","100","110","125","140","160"],"Shank Diameter - Metric (d)":["3.5814","4.9276","6.477","8.0772","9.6774","9.3218","10.8966","13.7668","14.986","17.7038","19.304","20.32","22.7584"],"Tap Drill Size Max - Metric":["2.35","2.888","3.428","4.591","5.672","6.831","9.025","11.233","13.431","15.631","17.631","19.999","21.999","23.999","26.376"],"Pitch":["0.4","0.45","0.5","0.7","0.8","1","1.25","1.5","1.75","2","2.5","3"],"Tap Drill Size Min - Metric":["2.317","2.851","3.387","4.539","5.608","6.761","8.946","11.145","13.333","15.519","17.519","19.868","21.868","23.868","26.228"],"Neck Length - Metric (L1)":["9.21","18.26","21.32","25.37","30.46","35","39","49.1","50.1","55","61.8","67.4","68.4","76.5","79.1"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125","12.7","15.875","17.4625","19.05","20.6375","22.225"],"Thread Length - Metric (Lc)":["8","6","7","10","11","12","15","17","20","25","30"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Chamfer Type":"Modified Bottom (2.5P)","Benefit 4":"Additional length provides greater reach capabilities.","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"12-25","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","List Name":"HL-S-XPF STI","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","Interrupted Thread":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Meets 2B Class of Fit":"No","Feature 1":"Fluteless Forming Tap","Web Literature 1":"8002024CA-TP,322","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 4":"800389CA","Meets 3B Class of Fit":"No","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Thread Type":"M STI","Stainless Steels : 17-4PH":"M; Best","Thread Limit":["D3","D4","D5","D6","D8","D9","D10","D11"],"Stainless Steels : 300":"M; Best","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Meets 4H Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Meets 6H Class of Fit":"Yes","Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, V-Coating, STI","Thread Size - Metric":["M2","M2.5","M3","M4","M5","M6","M8","M10","M12","M14","M16","M18","M20","M22","M24"],"Units":"Metric","Surface Treatment":"V","STI Thread":"Yes","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"9.21mm - 79.1mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 160mm","Shank-Sizes":"3.5814mm - 22.7584mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016360/Taps_-_Tap_-_EXOPRO_XPF_-_List_16360_-_Screw_Thread_Insert_Taps_-_Catalog"],"Friendly Name":"16360"}

Usedcarbide inserts manufacturers

{"Chamfer Length - Inch":["0.01875","0.03125","0.023437","0.039062","0.026785","0.044642","0.052083","0.0375","0.0625","0.046875","0.078125","0.104166","0.075","0.125","0.053571","0.089285","0.083333","0.138888","0.09375","0.15625"],"Number of Flutes":"-","Major Diameter - Inch":["0.06","0.073","0.086","0.099","0.112","0.125","0.138","0.164","0.19","0.216","0.25","0.3125","0.375"],"Tap Drill Size Max - Inch":["0.0549","0.066625","0.078714","0.0905","0.1018","0.1148","0.12525","0.15125","0.173","0.17725","0.199","0.2296","0.235429","0.289833","0.2955","0.3495","0.358"],"Neck Length - Inch (L1)":["0.356692","0.413385","0.476377","0.535433","0.559055","0.625984","0.685039","0.751968","0.866141","0.93307","0.996062","1.125984","1.251968"],"Threads Per Inch":["80","64","56","48","40","32","24","20","28","18","16"],"Tap Drill Size Min - Inch":["0.053625","0.065031","0.076893","0.088375","0.09925","0.11225","0.122063","0.148063","0.16875","0.174063","0.19475","0.2245","0.231786","0.284167","0.29125","0.343125","0.35375"],"Square Length - Inch (Ik)":["0.1875","0.25","0.28125","0.3125","0.375","0.4375"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.22","0.255","0.318","0.381"],"Overall Length - Inch (L)":["1.625","1.688","1.75","1.813","1.875","1.938","2","2.125","2.375","2.5","2.719","2.938"],"Thread Length - Inch (Lc)":["0.317322","0.374015","0.437007","0.496062","0.295275","0.299212","0.370078","0.492125","0.594488","0.665354","0.751968"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.165","0.191","0.238","0.286"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Chamfer Type":["Bottom (1.5P)","Modified Bottom (2.5P)"],"Brand":"EXOTAP","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"15-30","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"10-15","Hardened Steels : 35 HRC":"H; Good","Cutting Speed (SFM) - Die Steels":"15-20","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-130","Cutting Speed (SFM) - Aluminum : Casting":"65-130","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Cutting Speed (SFM) - High Carbon Steel : 1065":"15-30","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Stainless Steels : 300":"15-50","Cutting Speed (SFM) - Stainless Steels : 400":"15-50","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Web Literature 1":["8002024CA-TP,65","8002024CA-TP,66","8002024CA-TP,67"],"Units":"Inch","High Carbon Steel : 1065":"P; Best","List Name":"VP-NRT","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","STI Thread":"No","Product Overview":"CPM, V-coating","Stainless Steels : 300":"M; Best","Meets 2B Class of Fit":["Yes","No"],"Low Carbon Steel : 1010; 1018":"P; Best","Thread Size - Number":["No. 0","No. 1","No. 2","No. 3","No. 4","No. 5","No. 6","No. 8","No. 10","No. 12"],"Stainless Steels : 400":"M; Best","Thread Limit":["H2","H3","h4","H5","h6","H7","h8","H9"],"Medium Carbon Steel : 1035; 1045":"P; Best","Meets 3B Class of Fit":["Yes","No"],"Stainless Steels : 17-4PH":"M; Good","Short Description":"Premium Powder Metal High Speed Steel","Thread Type":["UNF","UNC"],"Surface Treatment":"V","Substrate":"VC-10","Thread Size - Inch":["1/4","5/16","3/8"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.356692\" - 1.251968\"","Taper-Sizes":"-","Overall-Sizes":"1.625\" - 2.938\"","Shank-Sizes":"0.141\" - 0.381\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014050/Taps_-_Tap_-_EXOTAP_NRT_-_List_14050_-_Forming_Taps_-_Catalog"],"Friendly Name":"14050"}

{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985"],"Chamfer Length - Inch":["0.034448","0.023622","0.03937","0.026574","0.044291","0.029527","0.049212","0.035433","0.059055","0.106299","0.041338","0.068897","0.124015","0.047244","0.07874","0.141732","0.098425","0.177165","0.073818","0.123031","0.221456","0.088582","0.147637","0.265748","0.103346","0.172244","0.310039"],"Major Diameter - Metric":["1.6","1.7","2","2.5","2.6","3","3.5","4","5","6","8","10","12"],"Overall Length - Metric (L)":["41.3","42.9","44.3","46","49.2","50.8","54","60.3","63.5","69.1","74.6","85.7"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218"],"Tap Drill Size Max - Metric":["1.457","1.557","1.837","2.316","2.416","2.796","3.255","3.714","4.674","5.592","7.49","9.388","11.286"],"Pitch":["0.35","0.4","0.45","0.5","0.6","0.7","0.8","1","1.25","1.5","1.75"],"Tap Drill Size Min - Metric":["1.422","1.522","1.796","2.271","2.371","2.745","3.194","3.643","4.592","5.49","7.363","9.235","11.108"],"Neck Length - Metric (L1)":["8.9","10.5","12.1","13.8","13.7","16","17.5","19.6","22.2","25.4","28.6","31.8","49.1"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125"],"Thread Length - Metric (Lc)":["7.9","9.5","11.1","12.8","12.7","6.2","8.4","10","12","15","18","21"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Good","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)","Plug (4.5P)"],"Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Brand":"HY-PRO TAP","Coolant Thru":"No","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"15-25","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"10-15","Hardened Steels : 35 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-25","Cutting Speed (SFM) - Aluminum : Casting":"45-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-100","Cutting Speed (SFM) - Die Steels":"15-20","Cutting Speed (SFM) - Aluminum : 6061; 7075":"50-90","Cutting Speed (SFM) - High Carbon Steel : 1065":"15-25","Full Description":"HY-PRO NRT Taps Forming Tap, For a Wide Range of Materials","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Product Category":"Forming","Cutting Speed (SFM) - Stainless Steels : 400":"15-40","Die Steels":"P; Good","Interrupted Thread":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Meets 2B Class of Fit":"No","List Name":"NRT","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request.","Web Literature 1":["8002024CA-TP,82","8002024CA-TP,83","8002024CA-TP,84","8002024CA-TP,85","8002024CA-TP,86","8002024CA-TP,87","8002024CA-TP,88"],"High Carbon Steel : 1065":"P; Best","Thread Type":["M","MF"],"Surface Treatment":["BRIGHT","Steam Oxide","TiN","TiCN"],"Web Literature 4":"800389CA","STI Thread":"No","Thread Limit":["D3","D5","D4","D6","D7","D8","D9","D10","D11","D12","D13","D14"],"Low Carbon Steel : 1010; 1018":"P; Best","Product Overview":"Forming Tap, For a Wide Range of Materials","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Good","Short Description":"Premium Design for a Wide Range of Materials","Meets 4H Class of Fit":["Yes","No"],"Meets 6H Class of Fit":["Yes","No"],"Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Stainless Steels : 400":"M; Good","Thread Size - Metric":["M1.6","M1.7","M2","M2.5","M2.6","M3","M3.5","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"8.9mm - 49.1mm","Taper-Sizes":"-","Overall-Sizes":"41.3mm - 85.7mm","Shank-Sizes":"3.5814mm - 9.6774mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014101/Taps_-_Tap_-_HY-PRO_NRT_-_List_14101_-_Forming_Taps_-_Catalog"],"Friendly Name":"14101"}

Ultimate performance CVD coated grade for high speed turning of steels Thick Al2O3 coating for improved wear resistance at high temperatures Super Nano Texture Technology with outstanding crystal orientation ...

Carbide inserts manufacturersnear me

Disposable insert. Single cutting edge. Note: Further indexable insert shapes, sizes and corner radii available on request.

CVD coated grade for steel turning New Line of chipbreakers for Medium to Heavy cutting Extremely stable tool life due to amazing chipping resistance

Tungstencarbide inserts manufacturers

BLU - a new sub-micrograin grade with PVD triple layer coating, The BLU grade provides a combination of very high strength with high wear resistance.

... fast feed, up to 3 mm/rev and small, up to 2.8 mm D.O.C. longitudinal turning. The new tools carry WOMG 100716-T3P-IQ double-sided 10° negative flank trigon inserts, for high feed turning ...

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

... cut applications of ductile and cast irons. TN20P Coated carbide. MTCVD-TiN-TiCN-Al2O3-TiN. Great general-purpose turning grade for steels. Ideal for semi-finishing to moderately heavy roughing. TN30M Coated ...

... for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination ...

Worldia - CC Type Polycrystalline Diamond (PCD) Turning Insert - 80° Model: - CC TYPE Brand: - WORLDIA Availability: - Delivery time 15days Place of origin: - Beijing,China Capacity（Monthly）: ...

Bestcarbide inserts manufacturers

{"Chamfer Length - Inch":["0.028125","0.040178","0.046875","0.05625","0.070312","0.09375","0.1125","0.080357","0.125","0.140625","0.160714","0.173076"],"Number of Flutes":"-","Major Diameter - Inch":["0.06","0.086","0.099","0.112","0.138","0.164","0.19","0.25","0.3125","0.375","0.4375","0.5"],"Tap Drill Size Max - Inch":["0.0549","0.078714","0.0905","0.1018","0.12525","0.15125","0.173","0.17725","0.2296","0.235429","0.289833","0.2955","0.3495","0.358","0.408357","0.4171","0.468615","0.4796"],"Neck Length - Inch (L1)":["0.356692","0.476","0.535","0.559","0.685","0.752","0.866","0.996","1.126","1.252","1.713","1.933"],"Threads Per Inch":["80","56","48","40","32","24","20","28","18","16","14","13"],"Tap Drill Size Min - Inch":["0.053625","0.076893","0.088375","0.09925","0.122063","0.148063","0.16875","0.174063","0.2245","0.231786","0.284167","0.29125","0.343125","0.35375","0.401071","0.412","0.460769","0.4745"],"Square Length - Inch (Ik)":["0.1875","0.25","0.3125","0.375","0.4375","0.40625"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.255","0.318","0.381","0.323","0.367"],"Overall Length - Inch (L)":["1.625","1.75","1.813","1.875","2","2.125","2.375","2.5","2.719","2.938","3.156","3.375"],"Thread Length - Inch (Lc)":["0.317322","0.437","0.496","0.295","0.37","0.374","0.492","0.594","0.665","0.752","0.858","0.921"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.191","0.238","0.286","0.242","0.275"],"View Catalog Page":"Here","Coolant Thru":"No","Class of Fit":"2B","Chamfer Type":"Bottom (2.25P)","Benefit 1":"Eliminates the need to choose the correct thread limit","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Brand":"HY-PRO TAP","Feature 1":"2B Class of Fit","Cutting Speed (SFM) - Aluminum : 6061; 7075":"45-100","Cutting Speed (SFM) - Aluminum : Casting":"45-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-100","Cutting Direction":"RH","Product Category":"Forming","Meets 4H Class of Fit":"No","Full Description":"Semi-premium taps made from premium high speed steel for general purpose tapping applications.","Medium Carbon Steel : 1035; 1045":"P; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","List Name":"NRT","Web Literature 1":["8002024CA-TP,89","8002024CA-TP,90"],"Product Overview":"2B, HSS","Meets 3B Class of Fit":"No","Web Literature 4":"800389CA","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","Units":"Inch","Surface Treatment":["BRIGHT","TiN","TiCN"],"STI Thread":"No","Meets 2B Class of Fit":"Yes","Low Carbon Steel : 1010; 1018":"P; Best","Thread Size - Number":["No. 0","No. 2","No. 3","No. 4","No. 6","No. 8","No. 10"],"Short Description":"General Purpose Class of Fit Taps","Substrate":"HSS","Thread Type":["UNF","UNC"],"Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.356692\" - 1.933\"","Taper-Sizes":"-","Overall-Sizes":"1.625\" - 3.375\"","Shank-Sizes":"0.141\" - 0.381\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20285/Taps_-_Tap_-_HY-PRO_SEVEN_-_List_285_-_Forming_Taps_-_Catalog"],"Friendly Name":"285"}

For machining cast iron materials •Suitable for smooth to slightly interrupted cuts •Enhanced coating adhesion with reduced residual stresses

Carbidetoolingmanufacturers

... Sharp cutting edges for machining alloyed materials and first choice for Stainless steel. Disadvantages: Existing on one grade IC908

{"Number of Flutes":"-","Chamfer Length - Inch":["0.104166","0.078125","0.208333","0.125","0.192307","0.089285","0.3125","0.15625","0.25","0.138888","0.0625","0.056818","0.227272","0.178571","0.277777","0.069444"],"Major Diameter - Inch":["0.19","1","0.5","0.216","0.25","0.75","0.375","0.3125","0.625","0.125","0.138","0.4375","0.875","0.164","0.5625"],"Overall Length - Inch (L)":["3.937007","5.905511","7.086614","8.661417","4.724409","4.330708","3.149606"],"Tap Drill Size Max - Inch":["0.173","0.17725","0.966","0.4796","0.468615","0.199","0.201429","0.2296","0.235429","0.949","0.7245","0.7092","0.3495","0.358","0.289833","0.2955","0.602333","0.1148","0.115727","0.587909","0.12525","0.1278","0.408357","0.4171","0.829667","0.845857","0.15125","0.152666","0.5285","0.539833"],"Threads Per Inch":["24","32","12","20","13","28","8","16","10","18","40","44","11","14","9","36"],"Neck Length - Inch (L1)":["0.96496","0.960629","3.011811","1.93307","1.124015","1.120866","1.207086","2.43307","1.574803","1.377952","2.125984","0.721653","0.804724","0.801181","1.712598","2.653543","0.845669","0.841338","1.97244"],"Tap Drill Size Min - Inch":["0.16875","0.174063","0.9575","0.4745","0.460769","0.19475","0.197786","0.2245","0.231786","0.93625","0.718125","0.699","0.343125","0.35375","0.284167","0.29125","0.596667","0.11225","0.113409","0.578636","0.122063","0.12525","0.401071","0.412","0.818333","0.838571","0.148063","0.149833","0.52","0.534167"],"Square Length - Inch (Ik)":["0.25","0.8125","0.4375","0.28125","0.3125","0.6875","0.375","0.5625","0.1875","0.40625","0.75","0.5"],"Shank Diameter - Inch (d)":["0.194","0.8","0.367","0.22","0.255","0.59","0.381","0.318","0.48","0.141","0.323","0.697","0.168","0.429"],"Thread Length - Inch (Lc)":["0.520078","0.515748","1.251968","0.767716","0.521653","0.518503","0.525984","1","0.625984","0.555118","0.909448","0.312204","0.391338","0.387795","0.712598","1.110236","0.392913","0.388582","0.834645"],"Square Width - Inch (k)":["0.152","0.6","0.275","0.165","0.191","0.442","0.286","0.238","0.36","0.11","0.242","0.523","0.131","0.322"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":"Modified Bottom (2.5P)","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","Meets 4H Class of Fit":"No","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","List Name":"LT-S-XPF","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-25","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Feature 1":"Fluteless Forming Tap","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,58","8002024CA-TP,59"],"Web Literature 4":"800389CA","Meets 3B Class of Fit":["No","Yes"],"Web Literature 2":"800222CA-V5","Units":"Inch","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Stainless Steels : 300":"M; Best","Meets 2B Class of Fit":["Yes","No"],"Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Thread Size - Number":["No. 10","No. 12","No. 5","No. 6","No. 8"],"Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Thread Limit":["h6","h8","H7","H5"],"Titanium : 6AL4V (30HRC)":"S; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Long Shank, V-Coating","Thread Type":["UNC","UNF"],"Surface Treatment":"V","Thread Size - Inch":["1","1/2","1/4","3/4","3/8","5/16","5/8","7/16","7/8","9/16"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.721653\" - 3.011811\"","Taper-Sizes":"-","Overall-Sizes":"3.149606\" - 8.661417\"","Shank-Sizes":"0.141\" - 0.8\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016255/Taps_-_Tap_-_EXOPRO_XPF-LS_-_List_16255_-_Catalog"],"Friendly Name":"16255"}

Carbide insertschart

{"Number of Flutes":"-","Chamfer Length - Inch":["0.147637","0.098425","0.123031","0.172244","0.19685","0.246062","0.034448","0.049212","0.059055","0.068897","0.073818","0.07874"],"Major Diameter - Metric":["10","12","14","16","18","20","3","3.5","4","4.5","5","6","7","8"],"Square Width - Metric (k)":["7.2644","6.985","8.1788","9.144","10.3124","12.4206","2.794","3.3274","3.8608","4.8514","6.0452"],"Overall Length - Metric (L)":["120","150","180","220","80","90","100","110"],"Tap Drill Size Max - Metric":["9.388","9.592","9.49","11.592","11.388","11.49","11.286","13.388","13.184","15.388","15.184","17.388","16.98","19.388","18.98","2.857","2.796","3.255","3.796","3.714","4.194","4.796","4.674","5.694","5.592","6.592","7.694","7.592","7.49"],"Shank Diameter - Metric (d)":["9.6774","9.3218","10.8966","12.192","13.7668","16.5608","3.5814","4.2672","4.9276","6.477","8.0772"],"Pitch":["1.5","1","1.25","1.75","2","2.5","0.35","0.5","0.6","0.7","0.75","0.8"],"Neck Length - Metric (L1)":["39","35","49.1","51.1","54","55","61.8","18","20.3","21.1","25","30"],"Tap Drill Size Min - Metric":["9.235","9.49","9.363","11.49","11.235","11.363","11.108","13.235","12.98","15.235","14.98","17.235","16.725","19.235","18.725","2.822","2.745","3.194","3.745","3.643","4.118","4.745","4.592","5.618","5.49","6.49","7.618","7.49","7.363"],"Square Length - Metric (Ik)":["11.1125","12.7","14.2875","15.875","17.4625","4.7625","6.35","7.9375","9.525"],"Thread Length - Metric (Lc)":["15","17","20","25","6","7.2","8.5","9.1","9.6","10","12"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Chamfer Type":"Modified Bottom (2.5P)","Benefit 4":"Additional length provides greater reach capabilities.","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","Meets 4H Class of Fit":["No","Yes"],"List Name":"LT-S-XPF","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-25","Interrupted Thread":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Meets 2B Class of Fit":"No","Feature 1":"Fluteless Forming Tap","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,60","8002024CA-TP,61"],"Web Literature 4":"800389CA","Meets 3B Class of Fit":"No","Web Literature 2":"800222CA-V5","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Thread Type":["M","MF"],"Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Thread Limit":["D10","D8","D9","D11","D12","D5","D6","D7"],"Stainless Steels : 300":"M; Best","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Titanium : 6AL4V (30HRC)":"S; Good","Meets 6H Class of Fit":["Yes","No"],"Substrate":"HSS-CO","Thread Size - Metric":["M10","M12","M14","M16","M18","M20","M3","M3.5","M4","M4.5","M5","M6","m7","M8"],"Product Overview":"HSS-Co, Long Shank, V-Coating","Units":"Metric","Surface Treatment":"V","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"18mm - 61.8mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 220mm","Shank-Sizes":"3.5814mm - 16.5608mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016355/Taps_-_Tap_-_EXOPRO_XPF-LS_-_List_16355_-_Catalog"],"Friendly Name":"16355"}

... special needs of hard turning using solid inserts with a 9.52 mm incircle. The form-fit and force-fit connection helps the insert return to the insert seating and provides ...

{"Number of Flutes":"-","Chamfer Length - Inch":["0.07874","0.03937","0.055118","0.125984","0.062992","0.19685","0.098425","0.23622","0.11811","0.27559","0.137795"],"Square Width - Metric (k)":["3.2","4","4.5","5","5.5","6.5"],"Major Diameter - Metric":["3","4","5","6","8","10","12"],"Overall Length - Metric (L)":["46","52","60","62","70","75","82"],"Tap Drill Size Max - Metric":["2.796","3.714","4.674","5.592","7.49","9.388","9.49","11.286","11.388","11.49"],"Shank Diameter - Metric (d)":["4","5","5.5","6","6.2","7","8.5"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["19","21","23.9","29"],"Tap Drill Size Min - Metric":["2.745","3.643","4.592","5.49","7.363","9.235","9.363","11.108","11.235","11.363"],"Square Length - Metric (Ik)":["6","7","8","9"],"Thread Length - Metric (Lc)":["10","13","15.9","19","22","24","29"],"Coolant Thru":"No","Chamfer Type":["Plug (4P)","Bottom (2P)"],"Benefit 3":"Provides High hardness with improved wear resistance and Increased production levels with longer tool life.","Benefit 2":"Provides versatile use in both through and blind hole applicaitons","Brand":"EXOCARB","Aluminum : 6061; 7075":"N; Best","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Aluminum : Casting":"N; Best","Cutting Speed (SFM) - Aluminum : Casting":"50-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Feature 1":"Micrograin carbide body","Cutting Direction":"RH","Product Category":"Forming","Feature 2":"Plug and Bottom","Meets 4H Class of Fit":["No","Yes"],"Interrupted Thread":"No","Full Description":"The EXOCARB Carbide Forming Taps are design to excel in Alminum and Alminum Casting. TiAIN and TiCN coatings are available upon requests for an extended tool life.","Feature 3":"TiCN and TiALN coatings available upon requests","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","List Name":"OT-NRT","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Substrate":"Carbide","STI Thread":"No","Product Overview":"Forming Tap, JIS","Thread Limit":["RH5","RH6","RH7","RH8"],"Meets 6H Class of Fit":"Yes","Short Description":"Tungsten Carbide Forming Taps","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Units":"Metric","View Catalog Page":"Here","Web Literature 1":"8002024CA-TP,63","Web Literature 4":"800389CA","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"19mm - 29mm","Taper-Sizes":"-","Overall-Sizes":"46mm - 82mm","Shank-Sizes":"4mm - 8.5mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20369/Taps_-_Tap_-_EXOCARB_-_List_369_-_Forming_Taps_-_Catalog"],"Friendly Name":"369"}

Tencarbide inserts manufacturers

{"Number of Flutes":"-","Major Diameter - Inch":["0.086","0.112","0.138","0.164","0.19","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Chamfer Length - Inch":["0.044642","0.0625","0.052083","0.078125","0.069444","0.104166","0.125","0.089285","0.138888","0.15625","0.178571","0.192307","0.208333","0.227272","0.25","0.277777","0.3125"],"Tap Drill Size Max - Inch":["0.1013","0.1333","0.1299","0.1637","0.159","0.1895","0.187","0.2238","0.216","0.2899","0.2789","0.3568","0.3462","0.4248","0.4091","0.4938","0.4777","0.56","0.5402","0.6282","0.6077","0.6961","0.6702","0.8276","0.8002","0.9606","0.9316","1.0966","1.0658"],"Neck Length - Inch (L1)":["0.718","0.841","0.8","1.003","0.996","1.198","1.196","1.203","1.199","1.377","1.535","1.933","1.712","1.972","2.125","2.165","2.433","2.653","3.011","3.114"],"Threads Per Inch":["56","40","48","32","36","24","20","28","18","16","14","13","12","11","10","9","8"],"Tap Drill Size Min - Inch":["0.0994","0.1309","0.1281","0.1613","0.1569","0.1873","0.1849","0.221","0.2138","0.2868","0.2769","0.3537","0.344","0.4215","0.407","0.4907","0.4758","0.557","0.5383","0.6251","0.6057","0.6928","0.6682","0.8241","0.798","0.9573","0.9297","1.0925","1.0636"],"Square Length - Inch (Ik)":["0.1875","0.25","0.28125","0.3125","0.375","0.4375","0.40625","0.5","0.5625","0.625","0.6875","0.75","0.8125","1","0.875"],"Shank Diameter - Inch (d)":["0.141","0.194","0.168","0.22","0.255","0.318","0.381","0.367","0.323","0.429","0.48","0.542","0.59","0.697","0.652","0.8","1.021","0.896"],"Thread Length - Inch (Lc)":["0.261","0.365","0.364","0.362","0.456","0.449","0.454","0.452","0.605","0.6","0.5","0.555","0.625","0.712","0.767","0.834","0.909","1","1.11","1.251"],"Overall Length - Inch (L)":["2.274","2.554","2.858","2.839","3.257","3.246","3.543","3.937","4.331","4.921","5.512","6.299","7.087"],"Square Width - Inch (k)":["0.11","0.152","0.131","0.165","0.191","0.238","0.286","0.275","0.242","0.322","0.36","0.406","0.442","0.523","0.489","0.6","0.766","0.672"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":"Modified Bottom (2.5P)","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"12-25","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","Meets 4H Class of Fit":"No","List Name":"HL-S-XPF STI","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Feature 1":"Fluteless Forming Tap","Web Literature 1":["8002024CA-TP,320","8002024CA-TP,321"],"Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 4":"800389CA","Units":"Inch","Web Video 1":"https://youtu.be/oHBvbgqfjw0","Web Video 2":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Web Video 3":"https://youtu.be/oHBvbgqfjw0","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Meets 2B Class of Fit":"Yes","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Thread Limit":["H1","H2","H3","h4","H5","h6","H7","H9","H10","h8","H11"],"Stainless Steels : 400":"M; Best","Thread Size - Number":["No. 2","No. 4","No. 6","No. 8","No. 10"],"Medium Carbon Steel : 1035; 1045":"P; Best","Meets 3B Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, V-Coating, STI","Thread Type":["UNC STI","UNF STI"],"Surface Treatment":"V","STI Thread":"Yes","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.718\" - 3.114\"","Taper-Sizes":"-","Overall-Sizes":"2.274\" - 7.087\"","Shank-Sizes":"0.141\" - 1.021\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016260/Taps_-_Tap_-_EXOPRO_XPF_-_List_16260_-_Screw_Thread_Insert_Taps_-_Catalog"],"Friendly Name":"16260"}

... The multi application grades CTPX710 and CTPX715 The new X7 multi-use grade can be used across ail application Windows. This is limited only by the chip breaker. Many materials, many requirements ...

{"Number of Flutes":"-","Square Width - Metric (k)":["4.8514","6.0452","7.2644","6.985","8.1788","9.144","10.3124","12.4206","13.2842","14.478","17.0688","19.4564","21.1074","23.495","27.2288","28.9306"],"Chamfer Length - Inch":["0.098425","0.073818","0.123031","0.088582","0.059055","0.265748","0.177165","0.221456","0.147637","0.172244","0.310039","0.103346","0.19685","0.11811","0.35433","0.442913","0.246062","0.295275","0.531496","0.344488","0.3937","0.044291","0.132874"],"Major Diameter - Metric":["6","7","8","10","12","14","16","18","20","22","24","27","30","33","36","42","45"],"Tap Drill Size Max - Metric":["5.592","5.694","6.592","7.592","7.49","7.694","9.592","9.388","9.49","11.286","11.592","11.388","11.49","13.184","13.388","15.388","15.184","17.388","16.98","19.388","18.98","21.388","21.184","20.98","23.388","23.184","22.776","25.776","28.572","31.572","34.368","40.164","43.164"],"Overall Length - Metric (L)":["80","90","100","110","125","140","160","180","200","220"],"Shank Diameter - Metric (d)":["6.477","8.0772","9.6774","9.3218","10.8966","12.192","13.7668","16.5608","17.7038","19.304","22.7584","25.9334","28.1432","31.3182","36.322","38.5826"],"Pitch":["1","0.75","1.25","1.5","1.75","2","2.5","3","3.5","4","4.5"],"Neck Length - Metric (L1)":["30","35","39","49.1","50.1","54","55","61.8","67.4","68.4","64","72","80","88"],"Tap Drill Size Min - Metric":["5.49","5.618","6.49","7.49","7.363","7.618","9.49","9.235","9.363","11.108","11.49","11.235","11.363","12.98","13.235","15.235","14.98","17.235","16.725","19.235","18.725","21.235","20.98","20.725","23.235","22.98","22.47","25.47","28.215","31.215","33.96","39.705","42.405"],"Square Length - Metric (Ik)":["7.9375","9.525","11.1125","12.7","14.2875","15.875","17.4625","19.05","22.225","25.4","26.9875","28.575","31.75"],"Thread Length - Metric (Lc)":["10","12","15","17","20","25","30","18","21","24","27"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)","Plug (4.5P)"],"Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Coolant Thru":"Yes","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Hardened Steels : 35-45 HRC":"H; Good","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"65-100","Cutting Speed (SFM) - Aluminum : Casting":"75-110","Cutting Speed (SFM) - Aluminum : 6061; 7075":"80-130","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"15-40","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - High Carbon Steel : 1065":"65-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"75-130","Die Steels":"P; Best","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"75-130","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-10","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-10","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-20","Cutting Speed (SFM) - Stainless Steels : 400":"20-45","Interrupted Thread":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Cutting Speed (SFM) - Stainless Steels : 300":"20-50","Feature 1":"Fluteless Forming Tap","Meets 2B Class of Fit":["No","Yes"],"List Name":"OIL-S-XPF","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,47","8002024CA-TP,48","8002024CA-TP,49"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 4":"800389CA","Meets 3B Class of Fit":["No","Yes"],"Web Literature 2":"800222CA-V5","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Thread Type":["M","MF"],"Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Stainless Steels : 300":"M; Best","Thread Limit":["D5","D8","D4","D7","D9","D10","D6","D11","D12","D13","D15","D16","D17"],"Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Meets 4H Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Meets 6H Class of Fit":["Yes","No"],"Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, Coolant Thru, V-Coating","Thread Size - Metric":["M6","m7","M8","M10","M12","M14","M16","M18","M20","M22","M24","M27","M30","M33","M36","M42","M45"],"Units":"Metric","Surface Treatment":"V","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"30mm - 88mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 220mm","Shank-Sizes":"6.477mm - 38.5826mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016150/Taps_-_Tap_-_EXOPRO_XPF-OIL_-_List_16150_-_Forming_Taps_-_Catalog"],"Friendly Name":"16150"}

CVD Coated Carbide Grades WT8010 Grade Tough substrate for steel machining For high-speed and continuous cutting application

{"Number of Flutes":"-","Chamfer Length - Inch":["0.059055","0.073818","0.088582"],"Square Width - Metric (k)":["4.9","6.2","8"],"Major Diameter - Metric":["6","8","10"],"Tap Drill Size Max - Metric":["5.592","7.49","9.49","9.388"],"Shank Diameter - Metric (d)":["6","8","10"],"Overall Length - Metric (L)":["80","90","100"],"Pitch":["1","1.25","1.5"],"Neck Length - Metric (L1)":["30","35","39"],"Tap Drill Size Min - Metric":["5.49","7.363","9.363","9.235"],"Square Length - Metric (Ik)":["8","9","11"],"Thread Length - Metric (Lc)":["12","15","18"],"View Catalog Page":"Here","Chamfer Type":"Bottom (1.5P)","Brand":"EXOCARB","Aluminum : 6061; 7075":"N; Best","Benefit 2":"Stable cutting performance","Aluminum : Casting":"N; Best","Benefit 1":"Greater reach capability","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : Casting":"50-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Cutting Direction":"RH","Product Category":"Forming","Interrupted Thread":"No","Feature 2":"Carbide protection on the cutting edge","Feature 1":"DIN Overall Length","Full Description":"The EXOCARB Carbide Forming Taps are design to excel in Alminum and Alminum Casting.","Meets 2B Class of Fit":"No","Notes":"See page 784 for tap drill recommendations.","List Name":"OTC-NRT","Web Literature 1":"8002024CA-TP,62","Meets 3B Class of Fit":"No","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Web Literature 4":"800389CA","Substrate":"Carbide","STI Thread":"No","Product Overview":"Carbide Inlaid, DIN Overall Length, DIN Shank","Thread Limit":"RH7","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Short Description":"Tungsten Carbide Forming Taps","Thread Size - Metric":["M6","M8","M10"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"30mm - 39mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 100mm","Shank-Sizes":"6mm - 10mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014153/Taps_-_Tap_-_EXOCARB_-_List_14153_-_Forming_Taps_-_Catalog"],"Friendly Name":"14153"}

Duratomic® is a high-performance grade offering that brings an exceptional combination of wear resistance and edge toughness behavior to a wide variety of Seco grades where every single ...

... coating to the KCP25C grade. The grade is extremely versatile when machining steel in a wide range of turning applications. It offers improved toughness and resistance to abrasion and chipping. Applied ...

{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985"],"Chamfer Length - Inch":["0.044291","0.062007","0.070866","0.088582","0.110728","0.132874","0.155019"],"Major Diameter - Metric":["3","4","5","6","8","10","12"],"Overall Length - Metric (L)":["50","55","62","65","75","82","85"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218"],"Tap Drill Size Max - Metric":["2.796","3.714","4.674","5.592","7.49","9.388","11.286"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["16","19.1","22.2","25.4","28.6","31.8","49.1"],"Tap Drill Size Min - Metric":["2.745","3.643","4.592","5.49","7.363","9.235","11.108"],"Square Length - Metric (Ik)":["4.7625","6.35","7.3","8.7","10.1","11.1125"],"Thread Length - Metric (Lc)":["6","8.4","9.6","12","15","18","21"],"View Catalog Page":"Here","Coolant Thru":"No","Class of Fit":"6H","Chamfer Type":"Bottom (2.25P)","Benefit 1":"Eliminates the need to choose the correct thread limit","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Brand":"HY-PRO TAP","Cutting Speed (SFM) - Aluminum : 6061; 7075":"45-100","Cutting Speed (SFM) - Aluminum : Casting":"45-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-100","Cutting Direction":"RH","Feature 1":"6H Class of Fit","Product Category":"Forming","Meets 4H Class of Fit":"No","Full Description":"Semi-premium taps made from premium high speed steel for general purpose tapping applications.","Medium Carbon Steel : 1035; 1045":"P; Good","Interrupted Thread":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","List Name":"NRT","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,91","Meets 3B Class of Fit":"No","Web Literature 4":"800389CA","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","Product Overview":"6H, HSS","Thread Type":["M","MF"],"Surface Treatment":["BRIGHT","TiN","TiCN"],"STI Thread":"No","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"General Purpose Class of Fit Taps","Substrate":"HSS","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"16mm - 49.1mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 85mm","Shank-Sizes":"3.5814mm - 9.6774mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20286/Taps_-_Tap_-_HY-PRO_SEVEN_-_List_286_-_Forming_Taps_-_Catalog"],"Friendly Name":"286"}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

- We produce our products with the unique technology and the bests quality by setting the orientation of single crystal diamond. - Maximizing convenience by applying standard holder. - Greater performance with long tool life and the ...