Zhuzhou Better Tungsten Carbide Company has been producing tungsten carbide dies for over 15 years. We have thousands of sets of mold to produce different carbide heading dies.

Excessive wear on the working surface of the convex and concave die, occlusal damage, local groove peeling, upsetting or breaking of the punch, swelling or cracking of the die, collapse of edges and corners, etc.

Book your table at Dovetail in Yaletown, Vancouver for a vibrant dining experience with seasonal shared plates and crafted cocktails. Reserve now.

Jul 23, 2021 — Chain Headway manufacture four models of PCD tooling inserts. These feature crystalline grain sizes that are suitable for different applications.

With high hardness and high bending strength, the tungsten carbide cold heading die is pressed and sintered by powder metallurgy. It is widely used in molding and fastener-making fields. The tungsten carbide heading die blanks are used as the core insert to be pressed in a steel jacket. Combined with a steel jacket, the cold heading die is more wear-resistant and more efficient, and the service life is increased a lot.

The cold heading die bears the impact load generated by the heading, and the working surface of the die is required to have high hardness and wear resistance, and the core has sufficient strength and toughness. If the hardened layer of the cold heading die is too hard or too deep, the mold parts will be broken; on the contrary, the working surface of the mold parts is easy to wear, and the rough material adheres to the mold parts. Usually, the hardness of the punch is 60~62HRC, the die is 58~60HRC, and the depth of the hardened layer should be controlled by 1.5~4mm. The cold heading die is subjected to severe stamping loads, and the surface of the die is subjected to high compressive stress. The mold material is required to have high strength, toughness, and wear resistance.

Check out our tactical brick selection for the very best in unique or custom, handmade pieces from our hunting & archery shops.

3530 Lawson Boulevard, Oceanside, NY, 11572-2747. Complete contact info, phone number and all products for this location. Get a direct or competing quote.

CombiHead Carbide Insert - Radius. Product Code: XXX674018. Our Price: $50.00. Please correct the following: Description. CombiHead Replacement Carbide ...

Honda OEM Part: 23432-KS4-000 - GEAR, FINAL (35T)

LinkedIn and 3rd parties use essential and non-essential cookies to provide, secure, analyze and improve our Services, and to show you relevant ads (including professional and job ads) on and off LinkedIn. Learn more in our Cookie Policy.

4.5" LONG DOUBLE CUT CARBIDE BURR SET, 5 PIECE. Part No. BUR5PC. (1)1 Review. $179.95. Add to Wishlist Add to Cart.

2018830 — This blog touched on the most basic of basics when it comes to feeds and speeds; just the first steps along the way to building your own knowledge.

Select Accept to consent or Reject to decline non-essential cookies for this use. You can update your choices at any time in your settings.

Under strong impact force, the impact pressure stress of the punch can reach more than 2500MPa, the surface of the concave die and the working surface of the punch are both subjected to severe impact friction, and the temperature generated on the surface is as high as 300℃. Due to the unequal end faces of the blank, the punch will also be subjected to bending stress. Cold heading dies under impact or strong impact wear-resistant working conditions, their commonality is that the cemented carbide has good impact toughness, fracture toughness, fatigue strength, bending strength, and good wear resistance. So many fasteners are formed by cold heading dies.

Chamfering ability: The maximum chamfering ability is 5x5MM. Pneumatic Professional Grinding chamfering machine Air chamfer Tool 28000RPM Y. Additional ...

Drywall Inside Bullnose Corner Tool Stainless Steel. Bullnose tool is made of lightweight flexible stainless steel. Fitted with a smooth wood handle.