G10 materialproperties

The dial allows you to move the blade 12 points to get that sharp blade edge as needed, it uses Clover’s 45mm Rotary Cutter blade which can be replaced.

The only way to produce parts in G-10 is through machining. G-10 laminate typically comes in sheet, rod, and bar shapes. Part size in this material may be limited if there is no stock size available. It is recommended for designers to use common stock thicknesses whenever possible on their project to avoid machining mid-layer in the laminate. Generous radii are recommended for internal corners due to the high RPMs needed when machining G-10. Smaller radii require smaller tools, which can wear out quickly against the glass composite.

Machining G10safety

Garolite parts are used in the medical, aerospace, and marine industries due to the material’s dimensional stability, longevity, and resistance to humidity. Corrosion resistance is inherent in G-10 because it is not a metal. G-10 specifies to MIL-I-24768/2 (GEE), MIL-P-18177 GEE and LP-509.

Some mechanical characteristics of G-10 are dependent on the orientation of the feature due to the directional layers in the G-10 laminate.

Garolite (G-10 or G10) is a composite material created by curing fiberglass and epoxy under high pressures. The resulting glass-epoxy laminate is extremely stable over temperature with low-moisture absorption and a high strength-to-weight ratio. Garolite has electrical insulating properties which are useful for electronic integrations. G-10 also has flame retardant variants, such as FR-4, which are typically used as the substrate for printed circuit boards (PCBs). G-10 is often used synonymously with phenolic as they are both fiberglass composites.

G10 material machiningprice

Garolite is a high-performance material that offers an install-once-and-last-forever level of reliability. As a composite, it boasts stiffness with superior engineering properties. Read on to understand the considerations of where and how to use this material for maximum value.

G10 material machiningpdf

Because of the dust mitigation that is necessary for handling Garolite, there are fewer machine shops which readily manufacture this material. This, combined with a high material cost, makes this material more premium-priced, with a longer lead time when compared to other standard plastic or metals.

Ready to start making parts with Garolite but don't know how to get started? Watch this video with Xometry Greg on "How to Get an Instant Garolite (G-10) CNC Machining Quote With Xometry." You'll learn how to add part specifications, certifications, inspection reports, drawings, and more.

Xometry, a leading manufacturer of custom Garolite machined components, utilizes a large Partner Manufacturing Network to produce parts to-spec and on-time. Xometry’s Instant Quoting Engine ™ allows creators to instantly quote Garolite projects with a 3D CAD model and further specify tight tolerances, inspection criteria, material certifications, and needed quantities. Xometry offers domestic Garolite machining services for expedited and standard lead times on G-10 projects as well as an international economy option. Xometry is ISO 9001, AS 9100, and ITAR certified.

Machining G10speeds and feeds

After cutting, Garolite typically produces a significant amount of dust which resembles powder instead of standard machining chips. Machinists should use special care to remove the dust for disposal without blowing it airborne. Machine shops that typically cut Garolite, glass-filled nylon, glass-filled ULTEM (PEI), carbon fiber, and graphite will have dedicated dust evacuation collection systems in the machines to facilitate clean up and avoid dust contamination.

G-10 CNC machining or turning typically requires high RPMs and secure workholding. Because of the fiberglass components, proper ventilation and safety equipment is a must. This includes respirators, protective garb, and eye protection for machinists. Medical G-10 parts are typically machined dry (i.e., no coolant) to avoid any material contamination but can also be cut with coolant to mitigate dust. The glass abrades standard cutting tools, so diamond-coated or super-alloy endmills are recommended to extend tool life with this material.

To start your Garolite (G-10) project, simply go to get.Xometry.com/quote and upload your 3D CAD model. Xometry accepts STEP (.step, .stp), SOLIDWORKS (.sldprt), Parasolid (.x_t, .x_b), Autodesk Inventor (.ipt), Dassault Systems (.3dxml, .catpart), PTC, Siemens (.prt), ACIS (.sat)

Garoliteg10 material machining

Garolite parts typically finish smooth to the touch, with a matte surface. The grain of the material can be apparent depending on the cut path. In particular, a countersink against the grain of the part will appear lighter than the rest of the part due to the gradual transition between layer cross-sections. G-10 parts will not hold a polish without a secondary coating.

Garolite is a composite material with superior engineering properties. Learn more about its material makeup, mechanical characteristics, design and machining challenges, and finish options.

Garolite parts can have features such as threaded holes that are typically milled, not tapped. External threads are turned on a lathe or thread milled instead of using a die. This is because the laminate material has a risk of delamination if enough heat and pressure is generated parallel to the grain.

Threaded inserts, such as helical coils, are recommended to increase the hold strength on a part. This is particularly useful if there is high torque or high repetition required on the thread.