Spotdrillangle

The undercut tool is a handy 45 degree angle tool for undercutting feet on thrown pieces. Additional information ...

Over 100 years old, the world's largest copper mine includes a 2.5-mile-wide pit in the Oquirrh Mountains southwest of Salt Lake City, Utah. Considered the largest man-made excavation, the mine dips nearly three-quarters of a mile down and covers 1,900 acres. First started in 1906, the mine is still open, but that hasn't kept it from being named a National Historic Landmark with a visitor center for folks who want to come and gawk.

... Tool distributor. Get started now ... How to Buy. At Harvey Tool, our decision to sell exclusively through a select network of authorized distributors in ...

Spotdrill vs center drill

Seth, I do this all the time, I select the top chamfer often.  Not the bottom one though.  I never got what you are showing!  In your example, is the drill tip the same angle as the top chamfer?  If so, then maybe, but usually the angle is different.  If your angle is different, then I am really surprised, never ever had this behavior!!  CAM 2024?

Tim Newcomb is a journalist based in the Pacific Northwest. He covers stadiums, sneakers, gear, infrastructure, and more for a variety of publications, including Popular Mechanics. His favorite interviews have included sit-downs with Roger Federer in Switzerland, Kobe Bryant in Los Angeles, and Tinker Hatfield in Portland.

Spotdrill depth

One of the newer holes on the list, the Diavik Diamond Mine opened in 2003 and has reached deeper than 600 feet in the Canadian Arctic. Located on the East Island in Lac de Gras northeast of Yellowknife, the mine is accessible only by plane—there's a gravel runway big enough for a Boeing 737—and an ice road. And that's only if the weather is good enough. The mine yields 3,300 pounds of diamonds annually amidst the ice.

This pattern works the same way in reverse - an aggregation of marginal losses. the 1% factor - challenge conventional thinking.

Laser cutting is a stable, accurate and reliable method of cutting stainless steel, resulting in a smooth, blemish-free cut that is weld-ready without the need ...

140 degreeSpotDrill

We offer: Cacciatorino Salami, Cheese Salami Roll, Wild Boar Salami, Calabrese Salami, Smoking Goose Delaware Fireball, Salami Cured Duck and much more.

Located in Africa and known as one of the largest hand-made holes in the world, "The Big Hole" actually started as a bit of a hill. With more than 50,000 miners pick-axing their way into the soil starting in 1866, the Kimberley Diamond Mine sunk more than 700 feet and expanded to over 1,500 feet in width by 1914. More than 6,000 pounds of diamond were pulled from what is still, understandably, a tourist destination.

Features. Threaded inserts reduce risk of cracking of installation material. A threaded insert with full thread is available in sizes ranging from M1.6 to M64+ ...

We can't dig to the center of the Earth, but that hasn't stopped us from trying. Whether explicit efforts to dig through the Earth's mantle or some of the world's wildest open-pit mines, humankind has done some serious digging. We explore some of the craziest manmade holes out there through both ice and land.

While I suspect that is why it's happening (same diameters), they do have different angles, with the top chamfer being a 90 degree and the bottom of the drilled hole being a 140 degree

Spot hole angle fixtool

Regal carries a full line of taps and drills for aluminum, as well as any other metal workpiece material. Regal also specializes in custom special taps.

I know nobody likes comparisons, but this does not happen in Inventor CAM, so at some point in Fusion the logic got screwed up, or it's just what @programming2C78B said, that would be more like it (or acceptable I guess).  I never pick the drill tip when picking holes, so I don't know if Inventor CAM would do the same if picking the drill tip instead of the actual hole.  I'll try later to see what happens.

Spotdrill bit

Spot hole angle fixreviews

Opened in 1955 as a way to mine for copper in Butte, Montana, the Berkeley Pit grew to a depth of 1,700 feet before it was closed down in 1982. Since that time the pit has filled with over 900 feet worth of groundwater and rainwater. Combined with the heavy metals and chemicals of the prior mining operation, the water has turned highly acidic and measures are taken to keep birds out of the water ever since a 342-bird flock of snow geese died inside the mile-long, half-mile-wide pit in the 1990s.

It looks like he may be selecting the actual chamfers, and not the "hole" which is why it may also include the drill points. Not right to me either, but may at least be the logic behind it.

Recessed Light Carbide Grit Hole Saw 6-3/8 inch diameter for 6 inch lights – fast cutting in drywall, lath & plaster, Hardie board - Hole Cutter Store.

Yes, that Cimco editor rules, I really like it.  Customize colors for each critical thing you want to keep an eye on and stuff, makes reading g-codes much faster!

Polyurethane bushing rear upper lateral bar outer LEXUS GS/GS HYBRID; LEXUS IS200T/250/350; RC35/300H/200T; 48790-30130; 1-06-4097.

@seth.madore ok wait a second...  hehe, so you selected a hole with the countersink, and for another hole you selected the drill point, is that what you did?  In that case, the software behaves correctly isn't it?  I'm getting confused I think!  I thought the original question was that he selected the countersinks, but that the software was looking at the drill point on the model and drilling some holes with the drill point depth and some with the csink depth.

Spot hole angle fixapp

5/8" Dia, 0.1080" Tip, 60 Degree, 3 Flute, 3/8" Shank Dia, Uncoated, Series 603, General Application Countersink - 74040.

HiI have deleted all the other operations and left the problem operation here on its own.  Look at what happens to the four corner holes.  The spot goes 30mm deep, but I've selected the chamfer at the top of the hole.  And to make things even stranger, there are two other holes that are the same diameter.  Those holes were spotted the right depth.  So why did it go deeper on the corners???

There are claims that the winds around Siberia's Mirny Mine sucks unsuspecting helicopters into its 1,700-feet-deep pit swirl, but even with those rumors aside, the diamond mine that began in 1955 remains fully off limits. Deep enough to hold a 150 story skyscraper inside, Stalin's diamond mine stretches 3,900 feet across and is one of the largest excavated pits in the world. And even though work in the open-pit mine has ceased, Russia still mines underground in the site.

Thanks to the University of Wisconsin, the Amundsen-Scott South Pole Station in Antarctica has 86 cables that reach beneath the ice, supporting 60 digital optical modules that relay data from the depths to the surface above. And that surface is a long ways away. The modules hang at depths starting at 4,750 feet all the way down to over 8,000 feet, or 1.5 miles. It took seven years to drill holes for the cables, done in the Southern Hemisphere's summer and with a 25,000-pound hot water hose that melted roughly 200,000 gallons of water per hole.

It does that?!  That seems like a failed algorithm to me!  I understand the fix, it's fine, but I think it should be looked at, seems a bit crazy that it considers the drill point as a different hole...  kind of funny actually...

Don't mind the 9-inch diameter. Instead focus on the Kola Superdeep Borehole's unmatched 7.5-mile depth. Started in 1970 by Russian scientists on the Kola Peninsula of Russia ultimately became the deepest hole in the world—deeper than even the deepest part of the ocean—after about 20 years of digging and experimentation. The 356 Fahrenheit temperature at that depth, however, made it impossible for tools to keep going. The site has been abandoned since 2008, and the hole bolted shut so nothing can get in.

well, thanks for checking, this never, ever happened to me in many many years of using the software!  I wonder what triggers it!  But anyway, I am not affected, so I don't care all that much about this "bug" lol.