As in the past, the Morrison Keyseater does not require to be positioned in a pit, and needs no bushings to center the keyways. Cuts from 1/8″ to 3″ wide and 14″ high

In a class all their own, these Positive Precision inserts are coated with Diamond Like Carbon for machining abrasive non-ferrous materials. Choose the AD2 grade as a cost effective PCD alternative for Glass Reinforced Plastics (GRP).

Automatic Feed: Automatic feed eliminates pushing a feed bar, eliminates the human error of feeding too much or too little. The automatic feed ensures accuracy and enables the operator to get ready for the next set-up

Hydraulic System: With the hydraulic set on maximum pressure cylinder size is 3 1/4″ diameter. The machine will develop approximately 8 tons of cutting pressure at cutting edge of cutter

Automatic Relief: Automatic relief backs the work away from the cutter on the up stroke eliminating drag and ensuring a clean keyseat

The overhead support is now easily raised and lowered by hydraulics with the push of a button. The programming is now extremely user friendly with the use of a programmable logic controller and human machine interface (HMI)

Automatic Centering: Automatic centering centers up the work quickly and easily. It can be set for multiple jobs of two or more pieces, automatically centering the next work piece

Less costly but not less effective. Utility turning inserts are as-pressed or precision pressed. They offer more robust edge definitions for larger work and tougher operations.

Quick Set-Up: Quick set-up is one of the most important features. The operator has all control handles built into the machine and to change from one piece to another is very simple, and requires the least amount of time. Also different cutter bits are interchangeable. The cutter bar does not need to be changed in order to cut different keyseats

Automatic Stop: Automatic stop automatically cuts off the feed for any given depth and this also frees the operator for other duties

Uses Single Tooth Cutters: Single tooth cutters are not only for accuracy but eliminate time and trouble in sharpening. All cutters are of the finest high speed tool steel

Peripheral ground for precision indexing and sharper edge definitions. Perfect for small diameter work where part deflection must be avoided. Sharp edges and precise hones are also necessary for machining difficult materials like Titanium, Stainless Steel, and High Temp alloys.

Automatic Lubrication: Automatic lubrication feeds oil to all necessary moving parts by the means of a “one shot” system convenient to the operator

Uses No Bushings: Uses no bushings and this feature not only simplifies the operation but no extra equipment need to be ordered to cut a keyseat in any size bore. The cutter bar is supported close to the actual cut by a quick acting, adjustable, cutter bar support, both above and below the work

The newly redesigned Morrison 3″ Keyseater has been physically modified and is more rigid than ever! The back support bracket is twice the length of the older models, enabling more accurate keyways in various materials