Pecat, O., Rentsch, R., Brinksmeier, E.: Influence of milling process parameters on the surface integrity of CFRP. In: Fifth CIRP Conference on High Performance Cutting, vol. 1, pp. 466–470 (2012)

William, D., Callister, J., Rethwisch, D.G.: Materials Science and Engineering: An Introduction, 8th edn. Wiley, New York (2009)

Chair of Engineering Mechanics, Faculty of Mechanical Engineering, Institute of Mechanics, Otto von Guericke University Magdeburg, Magdeburg, Sachsen-Anhalt, Germany

Durão, L.M.P., et al.: Drilling tool geometry evaluation for reinforced composite laminates. Compos. Struct. 92(7), 1545–1550 (2010)

Wang, H., et al.: Prediction of cutting forces in helical milling process. Int. J. Adv. Manuf. Technol. 58(9), 849–859 (2012)

Bhatnacar, N., et al.: On the machining of fiber reinforced plastic (FRP) composite laminates. Int. J. Mach. Tools Manuf. 35, 701–716 (1995)

Tsao, C.C., Hocheng, H.: Analysis of delamination in drilling composite materials by core-saw drill. Int. J. Mater. Prod. Technol. 32(2–3), 188–201 (2008)

Lee, C.K.: Structure, electrochemical and wear-corrosion properties of electroless nickel-phosphorus deposition on CFRP composites. Mater. Chem. Phys. 114(1), 125–133 (2009)

Kolesnikov, B., Herbeck, L., Fink, A.: CFRP/titanium hybrid material for improving composite bolted joints. Compos. Struct. 83(4), 368–380 (2008)

Mallick, P.K.: Fiber-Reinforced Composites: Materials, Manufacturing, and Design, 3rd edn. Taylor & Francis, CRC Press, Boca Raton (2008)

Zitoune, R., et al.: Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich. Compos. Part B-Eng. 43(3), 1480–1488 (2012)

Vaibhav, A.P., et al.: Drilling in carbon/epoxy composites: experimental investigations and finite element implementation. Compos. A Appl. Sci. Manuf. 47, 41–51 (2013)

Wang, Y.G., et al.: Cutting performance of carbon fiber reinforced plastics using PCD tool. Adv. Mater. Res. 215, 14–18 (2011)

Soutis, C.: Carbon fiber reinforced plastics in aircraft construction. Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 412(1–2), 171–176 (2005)

Zemann, R., Kain, L., Bleicher, F.: Vibration assisted machining of carbon fibre reinforced polymers. In: 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, vol. 69, pp. 536–543 (2014)

Denkena, B., Boehnke, Dege J.H.: Helical milling of CFRP–titanium layer compounds. CIRP J. Manufact. Sci. Technol. 1(2), 64–69 (2008)

Koboević, N., Jurjević, M., Koboević, Ž.: Influence of cutting parameters on thrust force, drilling torque and delamination during drilling of carbon fibre reinforced composites. Tehnički Vjesnik 19(2), 391–398 (2012)

Cobaltdownloader

Ashby, M.F., Jones, D.R.: Engineering Materials 1: An Introduction to Their Properties and Applications. Elsevier, England (2012)

Fitzer, E.: Carbon fibres-present state and future expectations. In: Carbon Fibers Filaments and Composites. Springer, Dordrecht. https://doi.org/10.1007/978-94-015-6847-0_1

Grzesik, W.: Advanced Machining Processes of Metallic Materials: Theory. Modelling and Applications, Elsevier, Oxford, UK (2008)

Tagliaferri, V., Diilio, A., Visconti, I.C.: Laser cutting of fiber-reinforced Polyesters. Composites 16(4), 317–325 (1985)

Gaitonde, V.N., et al.: Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites. J. Mater. Process. Technol. 203(1–3), 431–438 (2008)

Rawat, S., Attia, H.: Wear mechanisms and tool life management of WC-Co drills during dry high speed drilling of woven carbon fibre composites. Wear 267(5–8), 1022–1030 (2009)

Slamani, M., Dagger, J.F., Hamedanianpour, H.: Comparison of two models for predicting tool wear and cutting force components during high speed trimming of CFRP. Int. J. Mater. Form. 8(2), 305–316 (2015)

Çelik, Y.H., Kilickap, E., Kilickap, A.I.: An experimental study on milling of natural fiber (jute)-reinforced polymer composites. J. Compos. Mater. 53(22), 3127–3137 (2019)

Hintze, W., Hartmann, D., Schütte, C.: Occurrence and propagation of delamination during the machining of carbon fibre reinforced plastics (CFRPs)—an experimental study. Compos. Sci. Technol. 71(15), 1719–1726 (2011)

Rusinek, R.: Cutting process of composite materials: an experimental study. Int. J. Non-Linear Mech. 45(4), 458–462 (2010)

Mucha, P., et al.: Momentum and velocity of the ablated material in laser machining of carbon fiber preforms. Appl. Phys. A-Mater. Sci. Process. 113(2), 361–366 (2013)

Sundi, S., et al.: Influence of router tool Geometry on surface finish in edge trimming of multi-directional CFRP material. IOP Conf. Ser.: Mater. Sci. Eng. 469(1), 012026 (2019)

Li, H., et al.: Machining quality and cutting force signal analysis in UD-CFRP milling under different fiber orientation. Int. J. Adv. Manuf. Technol. 98(9–12), 2377–2387 (2018)

cobalt.tools reddit

Nor Khairusshima, M.K., et al.: Tool wear and surface roughness on milling carbon fiber-reinforced plastic using chilled air. J. Asian Sci. Res. 2(11), 593 (2011)

Haiyan, W., et al.: Analysis of cutting forces in helical milling of carbon fiber–reinforced plastics. Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf. 227(1), 62–74 (2012)

Senthilkumar, M., Prabukarthi, A., Krishnaraj, V.: Study on tool wear and chip formation during drilling carbon fiber reinforced polymer (CFRP)/titanium alloy (Ti6Al4V) stacks. Procedia Eng. 64, 582–592 (2013)

Hejjaji, A., et al.: Machining damage in frps: Laser versus conventional drilling. Compos. Part A-Appl. Sci. Manuf. 82, 42–52 (2016)

Brinksmeier, E., Janssen, R.: Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys. CIRP Ann. Manuf. Technol. 51(1), 87–90 (2002)

Klotz, S., Zanger, F., Schulze, V.: Influence of clamping systems during milling of carbon fiber reinforced composites. Procedia CIRP 24, 38–43 (2014)

Marx, W., Trink, S.: Manufacturing methods for cutting, machining and drilling composite materials. Technical Report No. AD-B034202. DoD, USA (1978)

Cobalttools app download

Morkavuk, S., et al.: Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: a comparative study. Compos. Part B-Eng. 147, 1–11 (2018)

Dold, C., et al.: Comparison of ground and laser machined polycrystalline diamond (PCD) tools in cutting carbon fiber reinforced plastics (CFRP) for aircraft structures. In: Fifth CIRP Conference on High Performance Cutting, vol. 1, pp. 178–183 (2012)

Haddad, M., et al.: Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior. Compos. B Eng. 57, 136–143 (2014)

Hult, J., Rammerstorfer, F.G.: Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures. Springer (1994)

Hancox, N.L.: Carbon-fiber reinforced bismaleimide and polystyryl pyridine laminates. Plast. Rubber Process. Appl. 10(3), 131–136 (1988)

Liu, D.F., Tang, Y.J., Cong, W.L.: A review of mechanical drilling for composite laminates. Compos. Struct. 94(4), 1265–1279 (2012)

Won, M.S., Dharan, C.K.H.: Chisel edge and pilot hole effects in drilling composite laminates. J. Manuf. Sci. Eng. 124(2), 242–247 (2002)

Nurhaniza, M., et al.: Analyzing the effect of machining parameters setting to the surface roughness during end milling of CFRP-Aluminium composite laminates. Int. J. Manuf. Eng. 2016, 1–9 (2016)

Davim, J.P., Reis, P.: Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments. Compos. Struct. 59(4), 481–487 (2003)

Hocheng, H., Puw, H.Y., Huang, Y.: Preliminary study on milling of unidirectional carbon fibre-reinforced plastics. Compos. Manuf. 4(2), 103–108 (1993)

Romano, F., Fiori, J., Mercurio, U.: Structural design and test capability of a CFRP aileron. Compos. Struct. 88(3), 333–341 (2009)

Ismail, S., et al.: Recent advances in twist drill design for composites machining: a critical review. Proc. Inst. Mech. Eng.-Part B-J. Eng. Manuf. 231(14), 2527–2542 (2016)

Kim, K.S., et al.: Machinability of carbon-fiber epoxy composite-materials in turning. J. Mater. Process. Technol. 32(3), 553–570 (1992)

Hou, J.P., Ruiz, C.: Measurement of the properties of woven CFRP T300/914 at different strain rates. Compos. Sci. Technol. 60(15), 2829–2834 (2000)

is cobalt.tools safe

Davim, J.P., Reis, P.: Drilling carbon fiber reinforced plastics manufactured by autoclave—experimental and statistical study. Mater. Des. 24(5), 315–324 (2003)

Davim, J.P., Reis, P.: Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments. J. Mater. Process. Technol. 160(2), 160–167 (2005)

Elmarakbi, A.: Advanced composite materials for automotive applications: Structural integrity and crashworthiness. John Wiley & Sons, UK (2013)

Isbilir, O., Ghassemieh, E.: Delamination and wear in drilling of carbon-fiber reinforced plastic composites using multilayer TiAlN/TiN PVD-coated tungsten carbide tools. J. Reinf. Plast. Compos. 31(10), 717–727 (2012)

Öchsner, A., da Silva, L.F.M., Altenbach, H.: Design and analysis of materials and engineering structures. Springer, Verlag Berlin Heidelberg (2013). https://doi.org/10.1007/978-3-642-32295-2

Mitchell, B.S.: An introduction to materials engineering and science for chemical and materials engineers. Wiley, USA (2004)

Wang, X.M., Zhang, L.C.: An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics. Int. J. Mach. Tools Manuf. 43(10), 1015–1022 (2003)

Kalla, D., Sheikh-Ahmad, J., Twomey, J.: Prediction of cutting forces in helical end milling fiber reinforced polymers. Int. J. Mach. Tools Manuf. 50(10), 882–891 (2010)

Yashiro, T., Ogawa, T., Sasahara, H.: Temperature measurement of cutting tool and machined surface layer in milling of CFRP. Int. J. Mach. Tools Manuf. 70, 63–69 (2013)

Cobalttools github

Islam, F., Ramkumar, J., Milani, A.S.: A simplified damage prediction framework for milling of unidirectional carbon fiber-reinforced plastics. Adv. Manuf.-Polym. Compos. Sci. 1(4), 175–184 (2015)

Karpat, Y., Bahtiyar, O., Deger, B.: Mechanistic force modeling for milling of unidirectional carbon fiber reinforced polymer laminates. Int. J. Mach. Tools Manuf. 56, 79–93 (2012)

Brinksmeier, E., Fangmann, S.: Orbital drilling of high tolerance boreholes. In: International Conference on Applied Production Technology (APT ‘07), pp. 75–84. BIAS-Verlag (2007)

Mazumdar, S.K.: Composites Manufacturing: Materials, Product, and Process Engineering. CRC press, Taylor & Francis Group (2001)

Hocheng, H., Puw, H.: On drilling characteristics of fiber-reinforced thermoset and thermoplastics. Int. J. Mach. Tools Manuf. 32(4), 583–592 (1992)

Phadnis, V.A., et al.: Drilling in carbon/epoxy composites: experimental investigations and finite element implementation. Compos. Part A-Appl. Sci. Manuf. 47, 41–51 (2013)

Żółkiewski, S.: Selection and impact of parameters in composite materials designing. In: 13th World Congress in Mechanism and Machine Science, Guanajuato, México (2011)

Muller-Hummel, P., Richter, J., Moller, B.: Neue Werkstoffe fordern neue Allianzen. WB: Werkstatt und Betrieb 141(10), 66 (2008)

Slamani, M., Gauthier, S., Chatelain, J.F.: A study of the combined effects of machining parameters on cutting force components during high speed robotic trimming of CFRPs. Measurement 59, 268–283 (2015)

Arul, S., et al.: The effect of vibratory drilling on hole quality in polymeric composites. Int. J. Mach. Tools Manuf. 46(3–4), 252–259 (2006)

Cobalttools app

Karnik, S.R., et al.: Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model. Mater. Des. 29(9), 1768–1776 (2008)

Karpat, Y., Polat, N.: Mechanistic force modeling for milling of carbon fiber reinforced polymers with double helix tools. CIRP Ann. Manuf. Technol. 62(1), 95–98 (2013)

Ozkan, D., et al.: Milling behavior analysis of carbon fiber-reinforced polymer (CFRP) composites. Mater. Today: Proc. 11, 526–533 (2019)

Kobalt tools website

Haddad, M., et al.: Study of the surface defects and dust generated during trimming of CFRP: influence of tool geometry, machining parameters and cutting speed range. Compos. Part A-Appl. Sci. Manuf. 66, 142–154 (2014)

Konneh, M., et al.: Surface roughness study of milled carbon fiber Reinforced polymer (CFRP) composite using 4 mm 2-flute titanium aluminum nitride (TiAlN) coated carbide end Mills. Adv. Mater. Res. 887, 1101–1106 (2014)

Asthana, R., Kumar, A., Dahotre, N.B.: Materials Processing and Manufacturing Science. Science & Technology Books. Elsevier, Boston, MA (2005)

Marques, A.T., et al.: Delamination analysis of carbon fibre reinforced laminates: Evaluation of a special step drill. Compos. Sci. Technol. 69(14), 2376–2382 (2009)

Klinkova, O., et al.: Characterization of friction properties at the work material/cutting tool interface during the machining of randomly structured carbon fibers reinforced polymer with carbide tools under dry conditions. Tribol. Int. 44(12), 2050–2058 (2011)

Shetty, N., et al.: Soft computing techniques during drilling of bi-directional carbon fiber reinforced composite. Appl. Soft Comput. 41, 466–478 (2016)

Mišković, A., Koboević, N.: The effect of cutting tool geometry on thrust FORCE and delamination when drilling carbon fibre reinforced composite materials. In Proceedings of the 15th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology, pp. 769–772, Prague (2011)

Ozkan, D., Gok, M.S., Karaoglanli, A.C. (2020). Carbon Fiber Reinforced Polymer (CFRP) Composite Materials, Their Characteristic Properties, Industrial Application Areas and Their Machinability. In: Öchsner, A., Altenbach, H. (eds) Engineering Design Applications III. Advanced Structured Materials, vol 124. Springer, Cham. https://doi.org/10.1007/978-3-030-39062-4_20

Takahashi, K., et al.: Heat conduction analysis of laser CFRP processing with IR and UV laser light. Compos. Part A-Appl. Sci. Manuf. 84, 114–122 (2016)

Gong, Y.H., et al.: Surface morphology in milling multidirectional carbon fiber reinforced polymer laminates. Adv. Mater. Res. 683, 158–162 (2013)

Zhang, L., Wang, L., Liu, X.: A mechanical model for predicting critical thrust forces in drilling composite laminates. Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 215(2), 135–146 (2001)

Gordon, S., Hillery, M.T.: A review of the cutting of composite materials. Proc. Inst. Mech. Eng. Part L-J. Mater.-Des. Appl. 217(L1), 35–45 (2003)

Faraz, A., Biermann, D., Weinert, K.: Cutting edge rounding: an innovative tool wear criterion in drilling CFRP composite laminates. Int. J. Mach. Tools Manuf. 49(15), 1185–1196 (2009)

Krishnamoorthy, A., Boopathy, S.R., Palanikumar, K.: Delamination prediction in drilling of CFRP composites using artificial neural network. J. Eng. Sci. Technol. 6(2), 191–203 (2011)

Shyha, I.S., et al.: Drill geometry and operating effects when cutting small diameter holes in CFRP. Int. J. Mach. Tools Manuf 49(12–13), 1008–1014 (2009)

Chao, P.Y., Hwang, Y.D.: An improved Taguchi’s method in design of experiments for milling CFRP composite. Int. J. Prod. Res. 35(1), 51–66 (1997)

Ozkan, D., et al.: The effect of cutting parameters on tool wear during the milling of carbon fiber reinforced polymer (CFRP) composites. Mater. Sci. 25(1), 42–46 (2019)

Tönshoff, H., et al.: Machining of holes developments in drilling technology. CIRP Ann. Manuf. Technol. 43(2), 551–561 (1994)

Ru-Min, W., Shui-Rong, Z., Zheng, Y.P.: Polymer Matrix Composites and Technology. Woodhead Publishing, Beijing, China (2011)

Sanda, A., et al.: Ultrasonically assisted drilling of carbon fibre reinforced plastics and Ti6Al4V. J. Manuf. Processes 22, 169–176 (2016)

Qin, X.D., et al.: Delamination analysis of the helical milling of carbon fiber-reinforced plastics by using the artificial neural network model. J. Mech. Sci. Technol. 28(2), 713–719 (2014)

Guu, Y.H., et al.: Effect of electrical discharge machining on the characteristics of carbon fiber reinforced carbon composites. J. Mater. Sci. 36(8), 2037–2043 (2001)

Sui, J.B., Wang, C.Y.: Machinability study of unidirectional CFRP laminates by slot milling. Int. J. Adv. Manuf. Technol. 100(1–4), 189–197 (2019)

Zhang, L., Lijiang, W., Xin, W.: Study on vibration drilling of fiber reinforced plastics with hybrid variation parameters method. Compos. A Appl. Sci. Manuf. 34(3), 237–244 (2003)

Makhdum, F., et al.: Cutting forces in ultrasonically assisted drilling of carbon fibre-reinforced plastics. J. Phys.: Conf. Ser. 382(1), 012019 (2012)

Che, D.M., et al.: Machining of carbon fiber reinforced plastics/polymers: a literature review. J. Manuf. Sci. Eng.-Trans. ASME 136(3), 034001 (2014)

Technology-oriented applications are becoming more important in today’s world and the use of technological processes continues to grow rapidly, day by day. Because of the advantages offered by composite materials, there is a great deal of interest in this material group in various industrial applications. Composite materials continue to develop at a great pace in parallel with the developments in metallic, ceramic and polymeric materials. Therefore, composite materials have found wide usage in engineering materials in recent years. In this material group, carbon fiber reinforced polymer (CFRP) composite materials, from the advanced composite material class, are commonly preferred in strategic applications due to their outstanding features such as high load-carrying capacity and low density. In this study, the production, characteristics and industrial usages of CFRP composite materials, milling and drilling operations carried out on them are presented along with current technology-oriented applications.

Suresha, B., et al.: Friction and dry sliding wear behavior of carbon and glass fabric reinforced vinyl ester composites. Tribol. Int. 43(3), 602–609 (2010)

Cobalttools mp3

Chen, W.C.: Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates. Int. J. Mach. Tools Manuf. 37(8), 1097–1108 (1997)

Klocke, F., Würtz, C.: The use of PCD tools for machining fibre reinforced materials (polycrystalline diamond). In: ECCM-8, pp. 509–515 (1998)

Jia, Z.Y., et al.: Temperature effects in end milling carbon fiber reinforced polymer composites. Polym. Compos. 39(2), 437–447 (2018)

Ferreira, J.R., Coppini, N.L., Neto, F.L.: Characteristics of carbon-carbon composite turning. J. Mater. Process. Technol. 109(1–2), 65–71 (2001)

Santiuste, C., et al.: Modelling thermal effects in machining of carbon fiber reinforced polymer composites. J. Reinf. Plast. Compos. 33(8), 758–766 (2014)