"Good Enough is Not Enough" is the ideal used to design every detail. Woodworkers who are most passionate about quality tools will be served by this table saw.

Harvey alpha table sawprice

Like every other Harvey made table saw machine, the ALPHA HW110S-36P and 52P are designed and engineered with unsurpassed quality and excellent performance.

Harvey alpha table sawmanual

Well i hope you would have got some insights about what Cutting Speed is and how about calculating the cutting speed for and efficient machining process. Kindly let us know your comments in the comment box below. Also if you have any questions feel free to write to us.

Find the rpm to turn a cylinder of 20 mm diameter with a cutting speed of 120 m/min. Diameter of job (d) = 20 mm Cutting speed (CS) = 120 m/min

As indicated above the unit for cutting speed is meters per minute(m/min). Therefore in case if the  diameter of the part or tool is measured in mm the formula for the cutting speed will be as below

Cutting speed is defined as the rate at which the material is removed from the workpiece during machining. In simple terms cutting speed is the metal removal rate. The unit of cutting speed is meters per minute (m/min).

Harvey alpha table sawreview

230V/50HZ/1PH/2,2KW, CE parallel guide up to 91 cm right, 30,5 cm left of the saw, sawblade adjustable to LEFT up to 45 degrees

Cutting speed = πD for one complete rotation. Similarly for two rotations it is going to be 2πD and so on. Therefore for “n” number of rotations Cutting Speed can be denoted as πDN. Where π is a constant, D stands for Diameter of the part / Tool, N stands for number of revolutions in rpm.

In a turning operation during metal removal, for each rotation of the spindle the material along the circumference is removed. This can be denoted as πD.