It is an excellent value and has some of the same features found on much larger mill drills. That’s why it is one of the best-selling mill drills in the country! The variable-speed 1 HP motor powers the R-8 spindle from 50–1125 RPM in low and 100–2250 RPM in high. Spindle RPM can be monitored on the convenient digital readout. A clear chip guard on the spindle keeps debris from flying at the operator. The large 7-1/16" by 26-5/8" table can be moved by handwheels in both the longitudinal and cross directions. Both feed directions can be locked by table lock levers. The G0704 also features tapered gibs with double locks which adds accuracy and rigidity, a dovetail column; and it comes with its own stand. The G0704 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your mill drill. Parts for the mill drill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 1 HP, 110V, single-phase, 12A Spindle taper: R-8 Spindle speeds: Variable, 50–1125 RPM low, 100–2250 RPM high Max. distance spindle to column: 7-1/2" Max. distance spindle to table: 13" Spindle travel: 2" Drilling capacity: 5/8" mild steel Vertical head travel: 11" Column tilt: 90° left/right Table size: 7-1/16" x 26-5/8" Table travel (longitudinal): 18-7/8" Table travel (cross): 6-7/8" T-slots: 3 @ 2-1/2" centers, 7/16" wide Stand footprint: 15-3/4" x 16-1/2" Overall dimensions: 38" x 34" x 67" Approximate shipping weight: 372 lbs. FEATURES: Spindle RPM DRO Spindle depth display Fine feed head control 2-Speed gearbox 3–16mm B16 drill chuck Clear guard on spindle Cast-iron dovetail column Rubber chip guards on ways Zero setting dials Dials read inches Forward/reverse switch Start/emergency stop buttons 1-year limited warranty Need help?We offer U.S.-based customer service and technical support to

Full profilethreadinginserts

The G0704 also features tapered gibs with double locks which adds accuracy and rigidity, a dovetail column; and it comes with its own stand. The G0704 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your mill drill. Parts for the mill drill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 1 HP, 110V, single-phase, 12A Spindle taper: R-8 Spindle speeds: Variable, 50–1125 RPM low, 100–2250 RPM high Max. distance spindle to column: 7-1/2" Max. distance spindle to table: 13" Spindle travel: 2" Drilling capacity: 5/8" mild steel Vertical head travel: 11" Column tilt: 90° left/right Table size: 7-1/16" x 26-5/8" Table travel (longitudinal): 18-7/8" Table travel (cross): 6-7/8" T-slots: 3 @ 2-1/2" centers, 7/16" wide Stand footprint: 15-3/4" x 16-1/2" Overall dimensions: 38" x 34" x 67" Approximate shipping weight: 372 lbs. FEATURES: Spindle RPM DRO Spindle depth display Fine feed head control 2-Speed gearbox 3–16mm B16 drill chuck Clear guard on spindle Cast-iron dovetail column Rubber chip guards on ways Zero setting dials Dials read inches Forward/reverse switch Start/emergency stop buttons 1-year limited warranty Need help?We offer U.S.-based customer service and technical support to

Carmex

The large 7-1/16" by 26-5/8" table can be moved by handwheels in both the longitudinal and cross directions. Both feed directions can be locked by table lock levers. The G0704 also features tapered gibs with double locks which adds accuracy and rigidity, a dovetail column; and it comes with its own stand. The G0704 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your mill drill. Parts for the mill drill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 1 HP, 110V, single-phase, 12A Spindle taper: R-8 Spindle speeds: Variable, 50–1125 RPM low, 100–2250 RPM high Max. distance spindle to column: 7-1/2" Max. distance spindle to table: 13" Spindle travel: 2" Drilling capacity: 5/8" mild steel Vertical head travel: 11" Column tilt: 90° left/right Table size: 7-1/16" x 26-5/8" Table travel (longitudinal): 18-7/8" Table travel (cross): 6-7/8" T-slots: 3 @ 2-1/2" centers, 7/16" wide Stand footprint: 15-3/4" x 16-1/2" Overall dimensions: 38" x 34" x 67" Approximate shipping weight: 372 lbs. FEATURES: Spindle RPM DRO Spindle depth display Fine feed head control 2-Speed gearbox 3–16mm B16 drill chuck Clear guard on spindle Cast-iron dovetail column Rubber chip guards on ways Zero setting dials Dials read inches Forward/reverse switch Start/emergency stop buttons 1-year limited warranty Need help?We offer U.S.-based customer service and technical support to

The G0704 7" x 27" 1 HP Mill Drill with Stand can be used as a dedicated, single-purpose machine in a professional shop. It can be easily operated by those just learning to mill in their home shop as well. It is an excellent value and has some of the same features found on much larger mill drills. That’s why it is one of the best-selling mill drills in the country! The variable-speed 1 HP motor powers the R-8 spindle from 50–1125 RPM in low and 100–2250 RPM in high. Spindle RPM can be monitored on the convenient digital readout. A clear chip guard on the spindle keeps debris from flying at the operator. The large 7-1/16" by 26-5/8" table can be moved by handwheels in both the longitudinal and cross directions. Both feed directions can be locked by table lock levers. The G0704 also features tapered gibs with double locks which adds accuracy and rigidity, a dovetail column; and it comes with its own stand. The G0704 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your mill drill. Parts for the mill drill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 1 HP, 110V, single-phase, 12A Spindle taper: R-8 Spindle speeds: Variable, 50–1125 RPM low, 100–2250 RPM high Max. distance spindle to column: 7-1/2" Max. distance spindle to table: 13" Spindle travel: 2" Drilling capacity: 5/8" mild steel Vertical head travel: 11" Column tilt: 90° left/right Table size: 7-1/16" x 26-5/8" Table travel (longitudinal): 18-7/8" Table travel (cross): 6-7/8" T-slots: 3 @ 2-1/2" centers, 7/16" wide Stand footprint: 15-3/4" x 16-1/2" Overall dimensions: 38" x 34" x 67" Approximate shipping weight: 372 lbs. FEATURES: Spindle RPM DRO Spindle depth display Fine feed head control 2-Speed gearbox 3–16mm B16 drill chuck Clear guard on spindle Cast-iron dovetail column Rubber chip guards on ways Zero setting dials Dials read inches Forward/reverse switch Start/emergency stop buttons 1-year limited warranty Need help?We offer U.S.-based customer service and technical support to

Carmex threadingCatalog

The variable-speed 1 HP motor powers the R-8 spindle from 50–1125 RPM in low and 100–2250 RPM in high. Spindle RPM can be monitored on the convenient digital readout. A clear chip guard on the spindle keeps debris from flying at the operator. The large 7-1/16" by 26-5/8" table can be moved by handwheels in both the longitudinal and cross directions. Both feed directions can be locked by table lock levers. The G0704 also features tapered gibs with double locks which adds accuracy and rigidity, a dovetail column; and it comes with its own stand. The G0704 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your mill drill. Parts for the mill drill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 1 HP, 110V, single-phase, 12A Spindle taper: R-8 Spindle speeds: Variable, 50–1125 RPM low, 100–2250 RPM high Max. distance spindle to column: 7-1/2" Max. distance spindle to table: 13" Spindle travel: 2" Drilling capacity: 5/8" mild steel Vertical head travel: 11" Column tilt: 90° left/right Table size: 7-1/16" x 26-5/8" Table travel (longitudinal): 18-7/8" Table travel (cross): 6-7/8" T-slots: 3 @ 2-1/2" centers, 7/16" wide Stand footprint: 15-3/4" x 16-1/2" Overall dimensions: 38" x 34" x 67" Approximate shipping weight: 372 lbs. FEATURES: Spindle RPM DRO Spindle depth display Fine feed head control 2-Speed gearbox 3–16mm B16 drill chuck Clear guard on spindle Cast-iron dovetail column Rubber chip guards on ways Zero setting dials Dials read inches Forward/reverse switch Start/emergency stop buttons 1-year limited warranty Need help?We offer U.S.-based customer service and technical support to

The G0704 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your mill drill. Parts for the mill drill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 1 HP, 110V, single-phase, 12A Spindle taper: R-8 Spindle speeds: Variable, 50–1125 RPM low, 100–2250 RPM high Max. distance spindle to column: 7-1/2" Max. distance spindle to table: 13" Spindle travel: 2" Drilling capacity: 5/8" mild steel Vertical head travel: 11" Column tilt: 90° left/right Table size: 7-1/16" x 26-5/8" Table travel (longitudinal): 18-7/8" Table travel (cross): 6-7/8" T-slots: 3 @ 2-1/2" centers, 7/16" wide Stand footprint: 15-3/4" x 16-1/2" Overall dimensions: 38" x 34" x 67" Approximate shipping weight: 372 lbs. FEATURES: Spindle RPM DRO Spindle depth display Fine feed head control 2-Speed gearbox 3–16mm B16 drill chuck Clear guard on spindle Cast-iron dovetail column Rubber chip guards on ways Zero setting dials Dials read inches Forward/reverse switch Start/emergency stop buttons 1-year limited warranty Need help?We offer U.S.-based customer service and technical support to