Harvey table saw

The competition was using a tougher grade suitable for more interrupted turning. Tool wear was chipping of the insert. Looking at the surface of the component, it was obvious that there were small vibrations present.In this case it was not possible to reduce the vibrations (by changing machine tool, clamping etc), so CBN060K was selected, which is tougher than CH0550, and more able to resist the vibrations, and the result was 25% longer tool life than the competitor.

UsedHarvey table Sawfor sale

Selecting the right grade for the specific application is crucial for the success of a PCBN-test. The selection should be based on the application, but it is also important to look at the existing grade, cutting data and tool wear to be able to make the right choice.

The circular table saws of the HW110SE-36(T)/52(T) series are the engineered proof of performance and precision, combined with safety.

The complete ALPHA series HW110SE-36(T)/52(T) is manufactured to the highest technological quality standards. The HW 110 series is not just about machine tools, but about innovations for your trade. Regardless of whether you are a hobby craftsman or an experienced professional setting up a woodworking shop. These saws offer you the reliability and performance you need to take your woodworking projects to the next level.

Harvey Table Sawdealers

Harvey alpha table sawprice

The special, transparent saw blade guard for controlled, aerodynamic dust removal is also included in the scope of delivery.

Circular saw blade HM - special for rip & cross cut - also in exotic hardwood | for rip and cross cuts - medium cutting quality | 250 x 3,2/2,2 x 30mm, Z=48 WZ

Perfectly flat, robust and everlasting | 800 x 590 x 45 mm | 45 kg | At present shipping is only possible to the EU, Switzerland and Norway

Harvey alpha table sawmanual

Harvey alpha table sawfor sale

We believe that the ALPHA HW110SE range of circular saws offers the ultimate solution to the problem of corrosion. Guided by our unwavering philosophy that "Good Enough is Not Enough", these saws are an example of our unwavering commitment to innovation and precision. At the heart of its ground-breaking functionality is the innovative Big Eye cutting fence system, which has already revolutionised precision and ease of use in woodworking.

Circular saw blade HM - tear-free cut without scorer - also in panels coated on both sides | for cross-sections - extremely fine cut quality | 250 x 3,2/2,2 x 30mm, Z=80 WZ neg.

Selecting the right grade for the specific application is crucial for the success of a PCBN-test. The selection should be based on the application, but it is also important to look at the existing grade, cutting data and tool wear to be able to make the right choice.In a continuous application, turning the face and inner diameter of a gear, a typical H05 application, a hard and wear resistant grade like CH0550 should be the right choice, but testing was not successful. The competition was using a tougher grade suitable for more interrupted turning. Tool wear was chipping of the insert. Looking at the surface of the component, it was obvious that there were small vibrations present.In this case it was not possible to reduce the vibrations (by changing machine tool, clamping etc), so CBN060K was selected, which is tougher than CH0550, and more able to resist the vibrations, and the result was 25% longer tool life than the competitor.Two conclusions can be drawn from this:When selecting the grade, look at the application, and look at what the competitor is using. In this case, the competitor had selected the right grade. CBN060K has been available for a while, but it is part of the HPT-chain, and still a very good grade, and it has its given position in the wear resistance versus toughness (ISO application area) chart, fully capable of beating any competitor in the H15 area. In a continuous application, turning the face and inner diameter of a gear, a typical H05 application, a hard and wear resistant grade like CH0550 should be the right choice, but testing was not successful.

Battery notice Packaging notice Delivery & shipping costs This is how you can pay Contact form Returns form Dispute settlement platform FAQ-Service

Harvey alpha table sawreview

Depending on the model, the machines are equipped with powerful 2.2 kW or 4 kW spindle motors. All models in the series are equipped with an MG-36 Pro M "COMPASS" mitre fence for precise, 11 commonly detented or infinitely adjustable angles for the production of mitre cuts and angle divisions.

In a continuous application, turning the face and inner diameter of a gear, a typical H05 application, a hard and wear resistant grade like CH0550 should be the right choice, but testing was not successful.