You’ll need hex keys, also known as Allen wrenches, for bolts or screws with a hexagonal socket—often found securing clamps, jigs, or other accessories to a machine’s worktable.

Sharpening stones come in different grits or levels of abrasiveness. Coarse grits are for heavy material removal. Finer grits refine and polish the edge. What you’ll want is one that has both medium and fine grit sides.

If there is a set of basic tools that a machinist uses more often than any other, it’s these. We highly recommend buying a quality set and keeping an extra as a backup because no matter how much you spend on these, they do strip.

You’ll use the fine grit to remove burrs, but having the other side gives you the ability to knock off bigger burrs and deburr edges without damaging the fine side. We also recommend that beginner machinists get a standard-sized one because it gives you a good size to hold on to. Look for a sharpening stone like this one with both medium and fine grits.

For markings other than the ones you etch with your machinist’s scribe, an industrial marker is nice to have. Permanent markers are good for labeling parts or other important references around your shop.

A machinist’s scribe makes a fine metal lathe project for beginners. Or, if you’d rather not tackle that project right now, here’s a nice, low-cost set of scribes.

Dead blow hammers are made of a heavy, dense material, such as steel. They’re also filled with lead shot or another weighting material. Lastly, they’re covered in thick rubber. They’re lighter than your typical sledge, but they’re still able to give a powerful, shock-absorbing blow without damaging the workpiece. Use them to:

It’s a compact, convenient way to access key formulas, charts, and conversion tables for machining and metalworking. You might also refer to it to refresh your memory on introductory machining concepts.

Just be sure your markers are industrial grade so they don’t wear off the second coolant touches your markings. Here’s a good marker set from Sharpie.

Machinist toolinglocations

To cover the widest range of tasks, choose a set with a variety of shapes, sizes, and cuts of files. Be sure it includes round files for shaping holes and needle files for precise work in tight spaces.

It’s also worth considering hex keys with a ball end for additional access to hard-to-reach bolts or screws. Some machinists prefer hex keys with a T or L shape for better leverage.

MachinistTools catalog

We recommend keeping two pairs on hand—1 low-cost workhorse set to help mark lines and another higher-quality set for your precise dimensional check.

Machinist toolingreviews

The magnetic base is a time-saving way to attach your dial indicator to a metal surface. You don’t have to hold or clamp it, and it stays stable for accurate measurements. No need for anything fancy for a magnetic base, but you should look for a quality dial indicator like this.

We saved the coolest-named tool for last. It’s called a “dead blow” hammer because there’s little to no rebound on the strike. So you have greater control over the striking force.

As the name implies, a thread pitch gauge helps you measure the pitch (or spacing) of screw threads. This info is key to creating replacement screws and checking the accuracy of a threaded part.

In addition to your lathes, milling machines, and other machining equipment, many different tools will help you advance your skills in common machining techniques.

A thread pitch gauge has a series of metal blades, each with a different number of teeth per inch. Insert the blades into the thread and check which one fits. This thread pitch gauge from Mitutoyo would be a good choice.

A quality set of pliers is another must-have in any shop. You’ll want a variety of pliers so you can always grab the right tool for the job. Some examples:

Machinist toolingnear me

An edge finder comes in handy when you need to cut in exactly the right spot. This small, simple device locates the edge of a workpiece relative to a machine’s spindle.

A decent sharpening stone is the best deburring tool money can buy. Helping you get rid of burrs and keep the piece you just cut from cutting you back. Simply rub the stone against the edge you just cut to remove any burrs before handling any workpiece barehanded.

A Reddit for Machinists of all varieties. From Old School conventional guys, to CNC Programmers, to the up and coming next generation.

Machinist toolingcatalogue

Machinists use a prick punch (also called a center punch) to make a small dimple or indentation in a workpiece. The dimple created is useful as:

Choose a manual rather than an automatic version, like you would use for woodworking, since the automatic ones may lack the power to make a dimple in your metal. Opt for higher quality since you’ll be using it frequently, and prick punches aren’t expensive.

When you get together all the essential tools for the beginning machinist, you’re prepared to advance your machining skills. Get started with our introductory overview of machining. Pick up some machinist tips and tricks, too.

This list already includes plenty of measuring tools for small, precision work. But you also need a tape measure to check larger workpiece dimensions and other less high-accuracy tasks.

But let’s not get too carried away with the gear! What tools do you really need as a beginning machinist? We’ve made a list of the basic machinist tools and even provided amazon links to the essential tools you need to get started.

Machinisttools and supplies

This is another tool you’ll use and beat up a lot in your shop. Low-cost versions are fine, but you might want to verify the thickness of the blades with your micrometer.

In addition to your Sharpies, you’ll probably want some pens on hand for notes and quick calculations. Like the markers, your pens should be industrial strength. You need something that won’t smudge or run when exposed to coolant, oil, etc.

It has a cylindrical probe with a pointed tip mounted in the spindle. When the tool contacts the edge, it causes a slight change in the spindle rotation. When you know where the edge is, you can position your cuts precisely.

One of the best things about getting into machining as a beginner is all the new tools and resources you get to tinker with.

KBC Tools

Get a set of each kind to cover various sizes you might need to measure. This outside micrometer set from Mitutoyo is a good example.

Many machinists prefer a Fisher space pen since you’ll often be writing onto coolant-soaked nitrile gloves. It’s pricier than your average set of Bics but will work far better and last much longer for the purpose. Just don’t loan it out to anyone.

Burrs—small metal protrusions—on cut workpieces are just a part of machining. But burrs cause safety and quality problems.

Machinisttools list

Hex screws come in a range of sizes, so it’s important to have a broad set of hex keys. Look for hex keys in both metric and imperial sizes. They should be made of durable materials, such as hardened steel, to withstand the demands of machining.

A micrometer is another type of precision measuring tool. You need this one to measure small dimensions to tight tolerances—typically to within a thousandth of an inch. So it’s not a tool to go cheap on.

This neon orange dead blow hammer would be easy to spot in your shop, and since they’re cheap, you should buy a few. These things do wear out, and rather quickly at that.

A micrometer has a calibrated screw that rotates to bring a measuring anvil into contact with the workpiece. The measurement is indicated on a dial or digital readout. Micrometers are available in a variety of types:

Look for a complete set in a range of sizes, both metric and imperial. Ratcheting capability is ideal for quick adjustments. This wrench set from GEARWRENCH should work well.

As you grow in the field, keep in mind that most of your machining equipment needs 3-phase electricity. So you need a way to power these powerful machines. And American Rotary has the answer! Our American-made rotary phase converters for machining can provide balanced power for everything in your shop.

Calipers are precision measuring tools for your workpieces or finished products. Vital to quality and efficient machining operations, calipers help you accurately measure dimensions, including:

It’s not made of carbide or steel, but nearly every machinist has a copy of this bible of machining in their box. Whenever you need to make a quick calculation or work through a dimensional problem, your Ready Reference is where you look.

A feeler gauge set helps measure small gaps and clearances with high accuracy. It’s a collection of thin metal blades of varying widths. By inserting different blades into the gap and checking which one fits, you can measure the clearance between two parts—such as between a valve and its seat or a spark plug and its electrode.

A machinist’s scribe is a long, slender, pointed hand tool. Use it alongside your measuring tools to mark the position of cuts, drills, or other features on a metal workpiece. You might also use a scribe to mark faults, defects, or other anomalies in a workpiece for troubleshooting. It provides a clear, precise line to ensure accuracy and consistency.

A dial indicator is yet another type of measuring tool. In this case, you use it to measure small changes in position or height with a high level of accuracy.