Yong, Z., Mata, V. G. & Rodrigues, A. E. Adsorption of carbon dioxide on chemically modified high surface area carbon-based adsorbents at high temperature. Adsorption 7, 41–50 (2001).

milling machine中文

Zhou, L., Bai, S. & Su, W. Comparative study of the excess versus absolute adsorption of CO2 on superactivated carbon for the near-critical region. Langmuir 19, 2683–2690 (2003).

The ATR-IR experiment was conducted using a Fourier transform infrared spectrometer (Nicolet Nexus 670) equipped with an attenuated total reflectance system (Nicolet, Smart Golden Gate) and a MCT-A detector. Raman spectra were measured using a Renishaw inVia Raman Microscope with a 514 nm excitation argon laser.

Langer, J. et al. Reversible CO2 fixation by iridium(I) complexes containing Me2PhP as ligand. Organometallics 29, 1642–1651 (2010).

Rice University has filed patent applications (PCT/US2013/021239, 61/839,567, 61/865,296, 614/865,323) on the carbon stationary phases and the mechanisms of fixation described here for CO2 capture from natural gas. Apache Corp. has licensed the intellectual property (agreement no. 0112011). None of the authors own rights to the technology described here and none hold stock in Apache Corp., aside from what might be held in broad mutual funds.

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Compared with secondary amine-based CO2 sorbents where maximum capture efficiency is 0.5 mol CO2 per mol N (2 RNH2+CO2→RNH3+ −O2CNHR), the SPC and NPC demonstrate a unique mechanism during the CO2 uptake process resulting in their remarkably higher CO2 capacities versus S or N content (8.1 atomic % of S and 6.2 atomic % of N in the SPC and NPC, respectively, by XPS analysis). Figure 3e,f shows a mechanism to illustrate this CO2 fixation by polymerization. Dimeric CO2 uptake has been crystallographically observed in metal complexes22, and polymeric CO2 has been detected previously but only at extremely high pressures of ~15,000 bar (ref. 21). The spectroscopic determination here confirms poly(CO2) formation at much lower pressures than formerly observed.

These cookies are strictly necessary to provide you with services available through our website and to use some of its features.

The Hardenability test for seamless pipes and hollow bars in short. In conclusion, the Hardenability test is a critical test in the manufacturing process of ...

Figure 3a,b shows the ATR-IR spectra of the SPC before (black line) and after exposure to 10 bar of CO2 followed by ambient conditions for the indicated times. The two regions that appear in the ATR-IR spectra (outlined by the dashed-line boxes) after the CO2 sorption are of interest. The first IR peak, located at 2,345 cm−1, is assigned to the anti-symmetric CO2 stretch, confirming that CO2 was physisorbed and evolving from the SPC sorbent. The other IR band, centred at 1,730 cm−1, is attributed to the C=O symmetric stretch from the poly(CO2) on the SPC. Interestingly, this carbonyl peak is only observed with the porous heteroatom-doped carbon, such as the SPC and NPC. Other porous sorbents without nucleophilic species, such as ZIF-8 and activated carbon, only showed the physisorbed or evolving CO2 peak (~2,345 cm−1) (Supplementary Figs 4 and 5). Once the CO2-filled SPC returned to ambient pressure, the key IR peaks attenuated over time and disappeared after 20 min. Based on this data, the ATR-IR study confirmed the poly(CO2) formation. Raman spectroscopy was further used to probe individual chemical bond vibrations as shown in Fig. 3c. The carbonaceous graphitic G-band and defect-derived diamondoid D-band were at 1,590 and 1,350 cm−1 (refs 19, 20). The peak at 798 cm−1 can be attributed to the symmetric stretch of the C–O–C bonds21,22, which was not observed for the other nucleophile-free porous materials, suggesting that the poly(CO2), with the –(O–C(=O))n– moiety, was formed. The monothiocarbonate and carbamate anions within the channels of the SPC and NPC, respectively, were the likely initiation points for the CO2 polymerization since no poly(CO2) was seen in activated carbon (Supplementary Fig. 5). Furthermore, 13C NMR also confirms the presence of the poly(CO2) formation. The sorbent gives a broad signal characteristic of aromatic carbon (Fig. 3d, bottom). After exposure to CO2, a relatively sharp signal on top of the broad sorbent signal appears at 130.6 p.p.m., which can be assigned to the CO2 that is evolving from the support. A sharp signal also appears at 166.5 p.p.m. (Fig. 3d, middle), which is characteristic of the carbonyl resonance for poly(CO2). Both of these signals are gone 19 h later (Fig. 3d, top), see Supplementary Note 3.

Ferrari, A. C. et al. Origin of new broad Raman D and G peaks in annealed graphene. Phys. Rev. Lett. 97, 187401–187404 (2006).

Qajar, A., Peer, M., Rajagopalan, R. & Foley, H. C. High pressure hydrogen adsorption apparatus: design and error analysis. Int. J. Hydrogen Energy 37, 9123–9136 (2012).

Puxty, G. et al. Carbon dioxide postcombustion capture: a novel screening study of the carbon dioxide absorption performance of 76 amines. Environ. Sci. Technol. 43, 6427–6433 (2009).

milling中文

Hwang, CC., Tour, J., Kittrell, C. et al. Capturing carbon dioxide as a polymer from natural gas. Nat Commun 5, 3961 (2014). https://doi.org/10.1038/ncomms4961

Small metal tube double end chamfering machine · Single end metal pipe and rod chamfering machine · Standard double end chamfering machine · CNC double end ...

Milling machine

Zhou, W., Wu, H., Hartman, M. R. & Yildirim, T. Hydrogen and methane adsorption in metal−organic frameworks: a high-pressure volumetric study. J. Phys. Chem. C 111, 16131–16137 (2007).

Hartzog, D. G. & Sircar, S. Root surface area measurements based on adsorption and desorption of nitrite. Adsorption 175, 133–137 (1995).

Figure 2 shows the pressure-dependent CO2 excess uptake for the SPC sorbent at different temperatures peaking at 18.6 mmol CO2 per g of sorbent (82 wt%) when at 22 °C and 30 bar. The sorption results measured by volumetric and gravimetric analyses were comparable, as were those measurements on the two volumetric instruments. We chose 30 bar as the upper pressure limit in our experiments because a 300-bar well-head pressure at 10 mol% CO2 concentration would have a CO2 partial pressure of 30 bar. Figure 2b–d shows three consecutive CO2 sorption–desorption cycles on SPC over a pressure range from 0 to 30 bar, which indicates that the SPC could be regenerated using a pressure swing process while retaining its original CO2 sorption capacity.

Bantam Tools® is excited to announce its newest machine, the Bantam Tools Desktop CNC Milling Machine, with pre-orders available at bantamtools.com. Making ...

Espinal, L., Poster, D. L., Wong-Ng, W., Allen, A. J. & Green, M. L. Measurement, standards, and data needs for CO2 capture materials: a critical review. Environ. Sci. Technol. 47, 11960–11975 (2013).

Volumetric CO2 sorption measurements were carried out on computer-controlled custom-built volumetric sorption equipment previously described in detail23, with an estimated reproducibility within 0.5% and isotherm data error bar of less than 2% compared with other commercial instruments. An amount of ~79 mg of sample was used for the experiments. Sample degassing, before the CO2 sorption experiment, was done at 130 °C under vacuum for 12 h.

XPS was performed using a PHI Quantera SXM Scanning X-ray Microprobe with a base pressure of 5 × 10−9 Torr. Survey spectra were recorded in 0.5 eV step size and a pass energy of 140 eV. Elemental spectra were recorded in 0.1 eV step size and a pass energy of 26 eV. All spectra were standardized using C1s peak (284.5 eV) as a reference.

An automated BET surface analyser (Quantachrome Autosorb-3b) was used for measurements of sorbents’ surface areas and pore volumes based on N2 adsorption–desorption. Typically, a ~100 mg of sample was loaded into a quartz tube and pretreated at 130 °C under vacuum (~5 mm Hg) in order to remove sorbates before the measurement.

Toray Industries, Inc. and Toyota Tsusho Corporation jointly developed the innovative energy-saving pyrolysis method for CFRP recycling and are promoting end ...

Blach, T. P. & Gray, E. Sieverts apparatus and methodology for accurate determination of hydrogen uptake by light-atom hosts. J. Alloys Compounds 446, 692–697 (2007).

(a,b) ATR-IR, (c) Raman and (d) 50.3 MHz 13C MAS NMR spectra before and after CO2 sorption at 10 bar and room temperature. All spectra were recorded at the elapsed times indicated on the graphs after the SPC sorbent was returned to ambient pressure. In the NMR experiments, the rotor containing the SPC was tightly capped during the analyses. For the 19 h NMR experiment the same material was left under ambient conditions for 19 h before being repacked in the rotor to obtain the final spectrum. Each NMR spectrum took 80 min to record. (e,f) A mechanism that illustrates the poly(CO2) formation in SPC or NPC, respectively, in a higher pressure CO2 environment. With the assistance of the nucleophile, such as S or N, the CO2 polymerization reaction is initiated under pressure, and the polymer is further likely stabilized by the van der Waals interactions with the carbon surfaces in the pores.

We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.

Sulphur- and nitrogen-containing porous carbons (SPC and NPC, respectively) were prepared by treating bulk precursor polymers with potassium hydroxide (KOH) at 600 °C (Fig. 1a; refs 10, 11). The resulting products were solid porous carbon materials with homogeneously distributed sulphur or nitrogen atoms incorporated into the carbon framework. They exhibited pores and channel structures as well as high surface areas of 2,500 and 1,490 m2 g−1 (N2, Brunauer–Emmett–Teller) for the SPC and the NPC, respectively, with pore volumes of 1.01 cm3 g−1 and 1.40 cm3 g−1, respectively. The scanning electron microscopy and transmission electron microscopy (TEM) images are shown in Fig. 1b–d, and the X-ray photoelectron spectroscopy (XPS) analyses are shown in Supplementary Fig. 1.

In order to better assess the sorption mechanism during the CO2 uptake, attenuated total reflectance infrared spectroscopy (ATR-IR) was used to characterize the properties of the sorbents before and after the CO2 uptake. A sample vial with ~100 mg of the SPC was loaded into a 0.8 l stainless steel autoclave equipped with a pressure gauge and valves. Before the autoclave was sealed, the chamber was flushed with CO2 (99.99%) to remove residual air, and the system was pressurized to 10 bar (line pressure limitation). The sorbent was therefore isobarically exposed to CO2 in the closed system at 23 °C. After 15 min, the system was vented to nitrogen at ambient pressure and the sorbent vial was immediately removed from the chamber and the sorbent underwent ATR-IR and Raman analyses in air.

Milling around

L Carbide Tipped Core Box Router Bit. Shop all Vermont American. Item # 2184257. | Mfr # 23124.

We’re big enough to develop innovative milling technologies for the challenging global markets and flexible enough, as an owner-managed company, to deliver a highly individual and personal customer experience. We take the time to get to know you properly so that we can build the perfect machine for you.

(a) Volumetric CO2 uptake performance at 30 °C of SPC, NPC, R-NPC and traditional sorbents: activated carbon, ZIF-8, and zeolite 5A. Al foil was used as a reference to ensure no CO2 condensation was occurring in the system at this temperature and pressure. Volumetric CO2 and CH4 uptake tests at 23 °C on (b) SPC, (c) activated carbon and (d) ZIF-8 sorbents.

Google Map Settings:Click to enable/disable Google Maps.Google reCaptcha Settings:Click to enable/disable Google reCaptcha.

These cookies collect information that is used either in aggregate form to help us understand how our website is being used or how effective our marketing campaigns are, or to help us customize our website and application for you in order to enhance your experience.

(a) The synthesis of SPC or NPC by treating poly[(2-hydroxymethyl)thiophene] or poly(acrylonitrile) with KOH at 600 °C and then washing with dilute HCl and water until the extracts are neutral. The NPC is further reduced using 10% H2 at 600 °C to form R-NPC, see Methods. (b) Scanning electron microscopy (SEM) image of NPC. Scale bar, 100 μm. (c) SEM image of SPC. Scale bar, 500 nm. (d) TEM image of the SPC. Scale bar, 25 nm.

Gravimetric CO2 sorption measurements were performed on a high pressure thermal gravimetric equipment (Model: TGA-HP50) from TA Instruments. An amount of ~15 mg of sample was used for the experiments. Sample degassing, before CO2 sorption experiment, was done at 130 °C under vacuum for 12 h.

Xie, Y., Wang, T. T., Liu, X. H., Zou, K. & Deng, W. Q. Capture and conversion of CO2 at ambient conditions by a conjugated microporous polymer. Nat. Commun. 4, 1960–1966 (2013).

D'Alessandro, D. M., Smit, B. & Long, J. R. Carbon dioxide capture: prospects for new materials. Angew. Chem. Int. Ed. 49, 6058–6082 (2010).

Natural gas is considered the cleanest and recently the most abundant fossil fuel source, yet when it is extracted from wells, it often contains 10–20 mol% carbon dioxide (20–40 wt%), which is generally vented to the atmosphere. Efforts are underway to contain this carbon dioxide at the well-head using inexpensive and non-corrosive methods. Here we report nucleophilic porous carbons are synthesized from simple and inexpensive carbon–sulphur and carbon–nitrogen precursors. Infrared, Raman and 13C nuclear magnetic resonance signatures substantiate carbon dioxide fixation by polymerization in the carbon channels to form poly(CO2) under much lower pressures than previously required. This growing chemisorbed sulphur- or nitrogen-atom-initiated poly(CO2) chain further displaces physisorbed hydrocarbon, providing a continuous carbon dioxide selectivity. Once returned to ambient conditions, the poly(CO2) spontaneously depolymerizes, leading to a sorbent that can be easily regenerated without the thermal energy input that is required for traditional sorbents.

We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.

A series of porous materials with and without the nucleophilic heteroatoms were tested to compare their CO2 capture performance up to 30 bar at 30 °C (Fig. 4a). The SPC had the highest CO2 capacity; the NPC, activated carbon, zeolite 5A and ZIF-8 had lower capacities. Although NPC had significantly lower CO2 capacity than SPC, its uptake performance could be improved by 21 wt% after H2 reduction at 600 °C, producing reduced-NPC (R-NPC) with secondary amine groups (Fig. 1a). Even though the surface area of R-NPC (1,450 m2 g−1) is only slightly greater than that of the activated carbon (1,430 m2 g−1), the presence of the amine groups induces the formation of the poly(CO2) under pressure, promoting the CO2 sorption efficiency of the R-NPC. The pore volume of R-NPC is 1.43 cm3 g−1.

Aug 10, 2005 — Most reaming feeds and speeds i have seen on manufacturers charts call for 25-30 SFM on mild steel. I've seen that too... but I usually try to ...

Dental milling machine

The PTh was activated by grinding PTh (500 mg) with KOH (1 g, 17.8 mmol) with a mortar and pestle and then heated under Ar at 600 °C in a tube furnace for 1 h. The Ar flow rate was 500 sccm. After cooling, the activated sample was thoroughly washed 3 × with 1.2 M HCl (1 l) and then with distilled water until the filtrate attained pH 7. The SPC sample was dried in an oven at 100 °C to afford 240 mg of the black solid SPC. The BET surface area and pore volume were 2,500 m2 g−1 and 1.01 cm3 g−1, respectively.

We thank G. Ruan, C. Xiang and Z. Peng for imaging. The work at Rice University was funded by Apache Corporation. The work at NIST was funded by NIST. Certain commercial materials, equipment, or processes are identified in the paper only to facilitate understanding. In no case does identification imply recommendation by NIST nor does it imply that the material, equipment, or process identified is necessarily the best available for this purpose.

Siriwardane, R. V., Shen, M. S., Fisher, E. P. & Poston, J. A. Adsorption of CO2 on molecular sieves and activated carbon. Energy Fuels 15, 279–284 (2001).

Milling people

Purification of natural gas from wells relies upon a highly CO2-selective sorbent, especially in a CH4-rich environment. Thus, CH4 uptake experiments were carried out on three different types of porous materials, SPC, activated carbon and ZIF-8. Figure 4b–d compares CO2 and CH4 sorption over a pressure range from 0 to 30 bar at 23 °C. In contrast to the CO2 sorption, the CH4 isotherms for these three sorbents reached equilibrium while the system pressure was approaching 30 bar. The order of the CH4 uptake capacities was correlated to the surface area of the sorbents. Comparing these sorbents, the observed molecular ratio of sorbed CO2 to CH4 (nCO2/nCH4) for the SPC (2.6) was greater than that for the activated carbon (1.5) and ZIF-8 (1.9). In addition, the density of the SPC calculated using volumetric analysis is sixfold higher than in the ZIF-8 (2.21 versus 0.35 g cm−3) and threefold higher than the zeolite 5A (2.21 versus 0.67 g cm−3). The high CO2 capacity and high density observed for SPC greatly increase the volume efficiency, which would reduce the volume of the sorption material for a given CO2 uptake production rate.

Although CO2 has no liquid state at ambient conditions, it can easily liquefy when the system pressure is higher, which can cause a serious analytical error during the measurements12,13. Since there are presently no accepted standards for CO2 uptake measurements14, further verification was sought: the same samples were analysed using different volumetric analysis instruments at Rice University and at the National Institute of Standards and Technology (NIST), and these were further confirmed with gravimetric measurements15.

In order to mimic a gas well environment and further characterize the SPC’s selectivity to CO2, a premixed gas (85 mol% CH4, 10 mol% CO2, 3 mol% C2H6 and 2 mol% C3H8) was used with quadrupole mass spectrometry (MS) detection. The MS inlet was connected to the gas uptake system so that it could monitor the gas effluent from the SPC throughout the sorption–desorption experiment. Supplementary Fig. 6 shows the mass spectrum recorded during the sorption process. The peaks at 15 and 16 amu correspond to fragment and molecular ions from CH4, while the peaks at 28 and 44 amu are from CO2 in the premixed gas. Other minor peaks can be assigned to fragment ions from C2H6 and C3H8. Although the peak at 44 amu can also come from C3H8 ions, the contribution is negligible because of the lower C3H8 concentration in the mixed gas, and it is distinguishable by the fragmentation ratios in the MS (C3H8: m/z=29 (100), 44 (30); CO2: m/z=44(100), 28(11)). The observed intensity ratio of two peaks at 16 and 44 amu (I16/I44=9.1) indicates the abundance of CH4 versus CO2 during the sorption and also reflects the relative amount of CH4 and CO2 in the premixed gas. Once the sorption reached equilibrium under 30 bar, the desorption process was induced by slowly venting into the MS system. The I16/I44 ratio reduced to ~0.7. The SPC has been shown to have 2.6-fold higher CO2 than CH4 affinity at 30 bar when using pure CO2 and CH4 as feed gases (Fig. 4b). If the binding energy of CH4 and CO2 were assumed to be similar, and the partial pressure of CH4 versus CO2 in the premixed gas is considered (PCH4/PCO2=8.5), then the number of sorbed CH4 should be ~3.3-times more than that of the sorbed CO2. Typically, CO2-selective materials have selective sites and once the CO2 occupies those sites, the selectivity significantly decreases and the materials behave as a physisorbent with lower selectivities at higher pressures. On the contrary, here the SPC demonstrates much higher CO2 selectivity than expected since the chemisorbed sulphur-initiated poly(CO2) chain displaces physisorbed gas.

Milling into meaning

An automobile operating on natural gas produces ~30% lower carbon dioxide (CO2) emissions than when operating on gasoline1. Provided technological efficiencies are maintained to minimize direct natural gas leakage to the atmosphere, there is a significant lowering of greenhouse gas emissions when using natural gas rather than liquid hydrocarbons2,3. At the same time, natural gas wells have typical CO2 concentrations of 10–20 mol%, and that can rise to as high as 70 mol% in some locations3. The CO2 is generally vented into the atmosphere at natural gas collection stations, significantly offsetting the environmental advantages of using natural gas as a fuel. Typically, aqueous amine scrubbers are used to remove CO2 from natural gas, but aqueous amines are corrosive, and the CO2-containing liquid requires heating to 125–140 °C to liberate the CO2 from the amine carbonate. This heating demands a high energy input and the scrubbers are not easily amenable to offshore CO2 capture due to their size and weight4,5. Long and other groups extensively reviewed aqueous amines and other methods of CO2 capture that include metal oxide frameworks, zeolites, ionic liquids, cryogenic distillation, membranes and metal oxides6,7,8,9. Some of these have hydrolytic instabilities and/or low densities leading to low volumetric efficiencies, or sometimes poor selectivity relative to methane, but most often there are synthesis constraints or energy costs associated with these technologies that lessen their suitability for on-site CO2 capture from natural gas.

The Richard E. Smalley Institute for Nanoscale Science and Technology, Rice University, 6100 Main Street, Houston, 77005, Texas, USA

Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.

Easily link up with top U.S. aluminum manufacturers, providing ISO-certified products crafted from high-quality materials at competitive rates.

Poly[(2-hydroxymethyl)thiophene] (PTh) (Sigma-Aldrich) was prepared using FeCl3 (ref. 24) In a typical synthesis, 2-thiophenemethanol (1.5 g, 13.1 mmol) in CH3CN (10 ml) was slowly added under vigorous stirring to a slurry of FeCl3 (14.5 g, 89.4 mmol) in CH3CN (50 ml). The mixture was stirred at room temperature for 24 h. The polymer (PTh) was separated by filtration over a sintered glass funnel, washed with distilled water (~1 l) and then with acetone (~200 ml). The polymer was dried at 100 °C for 12 h to afford 1.21 g (96% yield) of the desired compound.

Here we report new materials from simple and inexpensive carbon–sulphur or carbon–nitrogen solid sorbents, which separate CO2 from natural gas, with 0.82 g CO2 per g of sorbent (82 wt%) captured at 30 bar. A mechanism is described where CO2 is polymerized in the channels of the support, as initiated by the sulphur or nitrogen atoms that are part of the carbon framework. No temperature swing is needed; it proceeds at ambient temperature. Eventually, heat transfer between cylinders during the exothermic sorption and endothermic desorption might provide the requisite thermodynamic exchanges. The process uses the inherent natural gas-well pressure of 200–300 bar as a driving force during the polymerization. By lowering the pressure back to ambient conditions after CO2 uptake, the poly(CO2) then depolymerizes where it can be off-loaded, or pumped back downhole into the structures that had held it for geological timeframes.

Commercial polyacrylonitrile (PAN, 500 mg, average Mw 150,000, Sigma-Aldrich) powder and KOH (1,500 mg, 26.8 mmol) were ground to a homogeneous mixture in a mortar. The mixture was subsequently carbonized by heating to 600 °C under Ar (500 sccm) in a tube furnace for 1 h. The carbonized material was washed 3 × with 1.2 M HCl (1 l) and then with distilled water until the filtrate attained pH 7. Finally, the carbon sample was dried in an oven at 100 °C to afford 340 mg of the solid black NPC.

We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.

If you do not want that we track your visist to our site you can disable tracking in your browser here: Click to enable/disable Google Analytics tracking.

Some of the best ZIP codes to buy a home around 33310, Florida are 33308, 33319 and 33063 based on the current housing market and home values in 33310. Is this ...

MAS NMR spectra were recorded on a Bruker Avance III 4.7 T spectrometer with a standard MAS probe for 4 mm outer diameter rotors.

Iota, V., Yoo, C. S. & Cynn, H. Quartzlike carbon dioxide: an optically nonlinear extended solid at high pressures and temperatures. Science 283, 1510–1513 (1999).

Scanning electron microscope images were taken at 15 KeV using a JEOL-6500 F field emission microscope. High-resolution TEM images were obtained with a JEOL 2100 F field emission gun TEM.

milling · (transitive) to grind, press, or pulverize in or as if in a mill · (transitive) to process or produce in or with a mill · to cut or roll (metal) with ...

CNC milling machine

Under the mechanism described here for CO2 polymerization in the channels of inexpensive nucleophilic porous carbons, these new materials have continuous selectivity toward CO2, limited only by the available pore space and pressure. Through development of these enhanced stationary phase sorbents, capture and reinjection of CO2 at the natural gas sites could be realized, thereby leading to greatly reduced CO2 emissions from natural gas streams. CO2 fixation through polymerization is disclosed here as a major advance for future capture and possibly storage of this greenhouse gas.

Sankaran, M. & Viswanathan, B. The role of heteroatoms in carbon nanotubes for hydrogen storage. Carbon 44, 2816–2821 (2006).

How to cite this article: Hwang, C.-C. et al. Capturing carbon dioxide as a polymer from natural gas. Nat. Commun. 5:3961 doi: 10.1038/ncomms4961 (2014).

Li, J. R. et al. Porous materials with pre-designed single-molecule traps for CO2 selective adsorption. Nat. Commun. 4, 1538–1545 (2013).

US Dept. of Energy. Argonne National Laboratory Report: A Full Fuel-Cycle Analysis of Energy and Emissions Impacts of Transportation Fuels Produced from Natural Gas. Available at http://www.transportation.anl.gov/pdfs/TA/13.pdf (1999).

In the case of microporous materials with negligible external surface area, total uptake is often used as an approximation for absolute uptake, and the two values here are within 10% of each other; for example, the absolute CO2 uptake of the SPC was 20.1 and 13.9 mmol g−1 under 30 bar at 22 °C and 50 °C, respectively (Supplementary Figs 2 and 3 and Supplementary Note 1). Similarly, although absolute adsorption isotherms can be used to determine the heat of sorption, excess adsorption isotherms are more often used to calculate the heat of CO2 sorption (QCO2) before the critical point of the gas16,17. Thus, the excess CO2 sorption isotherms measured at two different temperatures, 23 °C and 50 °C (Fig. 2e), were input into the Clausius–Clapeyron equation18 (see Supplementary Note 2). At lower surface coverage (≤1 bar), which could be expected to be more indicative of the sorbate–sorbent interaction, the SPC exhibits a heat of CO2 sorption of 57.8 kJ mol−1. Likewise, the maximum QCO2 values for nucleophile-free porous materials, such as activated carbon, Zeolite 5 A and zeolitic imidazolate framework (ZIF-8, a class of the metal oxide frameworks) were measured to be 28.4, 31.2 and 25.6 kJ mol−1, respectively, at low surface coverage (see Supplementary Table 1). Based on this data, the SPC possesses the highest CO2 sorption enthalpy among these complementary sorbents measured at low surface coverage.

Wang, L. & Yang, R. Increasing selective CO2 adsorption on amine-grafted SBA-15 by increasing silanol density. J. Phys. Chem. 115, 21264–21272 (2011).

(a) Volumetric and gravimetric uptake of CO2 on SPC at different temperatures and pressures. Those designated with ‘*’ were recorded volumetrically at Rice University. That designated with ‘§’ was performed volumetrically at NIST. That designated ‘+’ was measured gravimetrically at NIST. All gravimetric measurements were corrected for buoyancy. (b–d) Three consecutive CO2 sorption–desorption cycles on the SPC over a pressure range from 0 to 30 bar at 30 °C. All solid circles indicate CO2 sorption, while the open circles designate the desorption process. (e) Volumetric SPC CO2 sorption isotherms at 23 °C and 50 °C over a pressure range from 0 to 1 bar.

Because these cookies are strictly necessary to deliver the website, refuseing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.

Xia, Y., Zhu, Y. & Tang, Y. Preparation of sulphur-doped microporous carbons for the storage of hydrogen and carbon dioxide. Carbon 50, 5543–5553 (2012).

Dresselhaus, M. S., Jorio, A., Hofmann, M., Dresselhaus, G. & Saito, R. Perspectives on carbon nanotubes and graphene Raman spectroscopy. Nano Lett. 10, 751–758 (2010).

Nov 10, 2011 — Insert geometry can make a huge difference in throughput, as demonstrated by the gains this manufacturer realized by swapping tools in a long-reach slot- ...

We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.

To produce R-NPC, the activated material (270 mg) was further reduced by 10% H2 (H2:Ar=50:450 sccm) at 600 °C for 1 h to provide 255 mg of the final material. The BET surface area and pore volume were 1,450 m2 g−1 and 1.43 cm3 g−1, respectively.

MTE Machine Tool Engineering S.A. Polígono Industrial, Parcela M-4.1 E – 20829 Itziar-Deba (Spain) Tel: +34 943 60 63 83 info@mtemachine.com www.mtemachine.com Google Maps

C.-C.H. designed and performed the experiments and wrote the manuscript. J.J.T. conducted some of the experiments. C.K. helped with the uptake analyses at Rice University. L.E. performed the uptake experiments at NIST. L.B.A. performed the solid state NMR and analyses. J.M.T. oversaw all phases of the research, suggested many of the experiments and revised the manuscript. All authors discussed and commented on the manuscript.

An automated Sieverts instrument (Setaram PCTPro) was adopted to measure gas (CO2, CH4 or premixed gas) sorption properties of materials. Typically, ~70 mg of sorbent was packed into a ~1.3 ml of stainless steel sample cell. The sample was pretreated under vacuum (~3 mm Hg) at 130 °C for 6 h and the sample volume was further determined by helium before the uptake experiment. At each step of the measurement, testing gas was expanded from the reference reservoir into the sample cell until the system pressure reached equilibrium. A quadrupole mass spectrometer (Setaram RGA200) was connected to the Sieverts instrument so that it could monitor the gas effluent from the sorbent throughout the entire sorption–desorption experiment. With the assistance of a hybrid turbomolecular drag pump, the background pressure of the MS can be controlled lower than 5 × 10−8 Torr. All material densities were determined using volumetric analysis on this same instrument.

Alvarez, R. A., Pacala, S. W., Winebrake, J. J., Chameides, W. L. & Hamburg, S. P. Greater focus needed on methane leakage from natural gas infrastructure. Proc. Natl Acad. Sci. USA 109, 6435–6440 (2012).