Lawn Repair For Ruts and Small Holes In Yard - spot hole angle fix
{"Chamfer Length - Inch":["0.01875","0.03125","0.023437","0.039062","0.026785","0.044642","0.052083","0.0375","0.0625","0.046875","0.078125","0.104166","0.075","0.125","0.053571","0.089285","0.083333","0.138888","0.09375","0.15625"],"Number of Flutes":"-","Major Diameter - Inch":["0.06","0.073","0.086","0.099","0.112","0.125","0.138","0.164","0.19","0.216","0.25","0.3125","0.375"],"Tap Drill Size Max - Inch":["0.0549","0.066625","0.078714","0.0905","0.1018","0.1148","0.12525","0.15125","0.173","0.17725","0.199","0.2296","0.235429","0.289833","0.2955","0.3495","0.358"],"Neck Length - Inch (L1)":["0.356692","0.413385","0.476377","0.535433","0.559055","0.625984","0.685039","0.751968","0.866141","0.93307","0.996062","1.125984","1.251968"],"Threads Per Inch":["80","64","56","48","40","32","24","20","28","18","16"],"Tap Drill Size Min - Inch":["0.053625","0.065031","0.076893","0.088375","0.09925","0.11225","0.122063","0.148063","0.16875","0.174063","0.19475","0.2245","0.231786","0.284167","0.29125","0.343125","0.35375"],"Square Length - Inch (Ik)":["0.1875","0.25","0.28125","0.3125","0.375","0.4375"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.22","0.255","0.318","0.381"],"Overall Length - Inch (L)":["1.625","1.688","1.75","1.813","1.875","1.938","2","2.125","2.375","2.5","2.719","2.938"],"Thread Length - Inch (Lc)":["0.317322","0.374015","0.437007","0.496062","0.295275","0.299212","0.370078","0.492125","0.594488","0.665354","0.751968"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.165","0.191","0.238","0.286"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Chamfer Type":["Bottom (1.5P)","Modified Bottom (2.5P)"],"Brand":"EXOTAP","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"15-30","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"10-15","Hardened Steels : 35 HRC":"H; Good","Cutting Speed (SFM) - Die Steels":"15-20","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-130","Cutting Speed (SFM) - Aluminum : Casting":"65-130","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Cutting Speed (SFM) - High Carbon Steel : 1065":"15-30","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Stainless Steels : 300":"15-50","Cutting Speed (SFM) - Stainless Steels : 400":"15-50","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Web Literature 1":["8002024CA-TP,65","8002024CA-TP,66","8002024CA-TP,67"],"Units":"Inch","High Carbon Steel : 1065":"P; Best","List Name":"VP-NRT","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","STI Thread":"No","Product Overview":"CPM, V-coating","Stainless Steels : 300":"M; Best","Meets 2B Class of Fit":["Yes","No"],"Low Carbon Steel : 1010; 1018":"P; Best","Thread Size - Number":["No. 0","No. 1","No. 2","No. 3","No. 4","No. 5","No. 6","No. 8","No. 10","No. 12"],"Stainless Steels : 400":"M; Best","Thread Limit":["H2","H3","h4","H5","h6","H7","h8","H9"],"Medium Carbon Steel : 1035; 1045":"P; Best","Meets 3B Class of Fit":["Yes","No"],"Stainless Steels : 17-4PH":"M; Good","Short Description":"Premium Powder Metal High Speed Steel","Thread Type":["UNF","UNC"],"Surface Treatment":"V","Substrate":"VC-10","Thread Size - Inch":["1/4","5/16","3/8"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.356692\" - 1.251968\"","Taper-Sizes":"-","Overall-Sizes":"1.625\" - 2.938\"","Shank-Sizes":"0.141\" - 0.381\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014050/Taps_-_Tap_-_EXOTAP_NRT_-_List_14050_-_Forming_Taps_-_Catalog"],"Friendly Name":"14050"}
Form tapvs cuttap
{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985"],"Chamfer Length - Inch":["0.044291","0.062007","0.070866","0.088582","0.110728","0.132874","0.155019"],"Major Diameter - Metric":["3","4","5","6","8","10","12"],"Overall Length - Metric (L)":["50","55","62","65","75","82","85"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218"],"Tap Drill Size Max - Metric":["2.796","3.714","4.674","5.592","7.49","9.388","11.286"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["16","19.1","22.2","25.4","28.6","31.8","49.1"],"Tap Drill Size Min - Metric":["2.745","3.643","4.592","5.49","7.363","9.235","11.108"],"Square Length - Metric (Ik)":["4.7625","6.35","7.3","8.7","10.1","11.1125"],"Thread Length - Metric (Lc)":["6","8.4","9.6","12","15","18","21"],"View Catalog Page":"Here","Coolant Thru":"No","Class of Fit":"6H","Chamfer Type":"Bottom (2.25P)","Benefit 1":"Eliminates the need to choose the correct thread limit","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Brand":"HY-PRO TAP","Cutting Speed (SFM) - Aluminum : 6061; 7075":"45-100","Cutting Speed (SFM) - Aluminum : Casting":"45-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-100","Cutting Direction":"RH","Feature 1":"6H Class of Fit","Product Category":"Forming","Meets 4H Class of Fit":"No","Full Description":"Semi-premium taps made from premium high speed steel for general purpose tapping applications.","Medium Carbon Steel : 1035; 1045":"P; Good","Interrupted Thread":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","List Name":"NRT","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,91","Meets 3B Class of Fit":"No","Web Literature 4":"800389CA","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","Product Overview":"6H, HSS","Thread Type":["M","MF"],"Surface Treatment":["BRIGHT","TiN","TiCN"],"STI Thread":"No","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"General Purpose Class of Fit Taps","Substrate":"HSS","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"16mm - 49.1mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 85mm","Shank-Sizes":"3.5814mm - 9.6774mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20286/Taps_-_Tap_-_HY-PRO_SEVEN_-_List_286_-_Forming_Taps_-_Catalog"],"Friendly Name":"286"}
{"Number of Flutes":"-","Chamfer Length - Inch":["0.3125","0.208333","0.125","0.375","0.416666","0.357142","0.115384","0.192307","0.346153","0.075","0.225","0.089285","0.053571","0.160714","0.5","0.1875","0.5625","0.25","0.15","0.45","0.15625","0.09375","0.28125","0.0625","0.104166","0.083333","0.138888","0.227272","0.40909","0.136363","0.107142","0.178571","0.321428","0.277777","0.166666"],"Overall Length - Inch (L)":["6.3","5.51","7.874015","5.905511","7.086614","4.330708","6.692913","3.937007","3.149606","8.661417","4.921259","3.543307","4.92","5.511811"],"Major Diameter - Inch":["1","1.5","1.125","0.5","1.25","1.375","0.25","1.625","1.75","0.75","0.375","0.3125","0.625","0.4375","0.875","0.5625"],"Shank Diameter - Inch (d)":["0.8","1.233","0.896","0.367","1.021","1.108","0.255","1.305","1.43","0.59","0.381","0.318","0.48","0.323","0.697","0.429"],"Threads Per Inch":["8","12","6","7","13","20","28","5","10","16","24","18","11","14","9"],"Tap Drill Size Max - Inch":["0.949","0.966","1.432","1.449","1.091","1.066714","1.074","0.468615","1.466","0.4796","1.216","1.191714","1.199","1.341","1.307","1.324","0.2296","0.235429","1.574","1.6684","1.699","0.7092","0.7245","0.3495","0.358","0.289833","0.2955","0.587909","0.602333","0.408357","0.4171","0.845857","0.829667","0.5285","0.539833"],"Neck Length - Inch (L1)":["3.012","3.149606","2.362204","2.834645","1.933","2.677165","1.181","3.464566","2.433","1.575","1.378","2.126","1.713","2.654","1.972"],"Tap Drill Size Min - Inch":["0.93625","0.9575","1.415","1.43625","1.0825","1.052143","1.06125","0.460769","1.4575","0.4745","1.2075","1.177143","1.18625","1.3325","1.29","1.31125","0.2245","0.231786","1.56125","1.648","1.68625","0.699","0.718125","0.343125","0.35375","0.284167","0.29125","0.578636","0.596667","0.401071","0.412","0.838571","0.818333","0.52","0.534167"],"Square Length - Inch (Ik)":["0.8125","1.125","0.875","0.4375","1","1.0625","0.3125","1.25","0.6875","0.375","0.5625","0.40625","0.75","0.5"],"Thread Length - Inch (Lc)":["1.252","1","0.834645","0.858267","0.768","0.5","1.200787","0.626","0.555","0.909","0.713","1.11","0.835"],"Square Width - Inch (k)":["0.6","0.925","0.672","0.275","0.766","0.831","0.191","0.979","1.072","0.442","0.286","0.238","0.36","0.242","0.523","0.322"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)","Plug (4.5P)"],"Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Coolant Thru":"Yes","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Hardened Steels : 35-45 HRC":"H; Good","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"65-100","Cutting Speed (SFM) - Aluminum : Casting":"75-110","Cutting Speed (SFM) - Aluminum : 6061; 7075":"80-130","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"15-40","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - High Carbon Steel : 1065":"65-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"75-130","Die Steels":"P; Best","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"75-130","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-10","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-10","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-20","Cutting Speed (SFM) - Stainless Steels : 400":"20-45","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Cutting Speed (SFM) - Stainless Steels : 300":"20-50","Feature 1":"Fluteless Forming Tap","List Name":"OIL-S-XPF","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,46","8002024CA-TP,45"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 4":"800389CA","Thread Size - Inch":["1","1-1/2","1-1/8","1/2","1-1/4","1-3/8","1/4","1-5/8","1-3/4","3/4","3/8","5/16","5/8","7/16","7/8","9/16"],"Web Literature 2":"800222CA-V5","Units":"Inch","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Meets 4H Class of Fit":"No","Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Stainless Steels : 300":"M; Best","Meets 2B Class of Fit":["Yes","No"],"Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Stainless Steels : 400":"M; Best","Thread Limit":["H11","h8","H15","H13","H5","H14","h4","h6","H16","H10","H7"],"Medium Carbon Steel : 1035; 1045":"P; Best","Meets 3B Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, Coolant Thru, V-Coating","Thread Type":["UNC","UNF","UN"],"Surface Treatment":"V","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"1.181\" - 3.464566\"","Taper-Sizes":"-","Overall-Sizes":"3.149606\" - 8.661417\"","Shank-Sizes":"0.255\" - 1.43\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016050/Taps_-_Tap_-_EXOPRO_XPF-OIL_-_List_16050_-_Forming_Taps"],"Friendly Name":"16050"}
{"Number of Flutes":"-","Chamfer Length - Inch":["0.147637","0.098425","0.123031","0.172244","0.19685","0.246062","0.034448","0.049212","0.059055","0.068897","0.073818","0.07874"],"Major Diameter - Metric":["10","12","14","16","18","20","3","3.5","4","4.5","5","6","7","8"],"Square Width - Metric (k)":["7.2644","6.985","8.1788","9.144","10.3124","12.4206","2.794","3.3274","3.8608","4.8514","6.0452"],"Overall Length - Metric (L)":["120","150","180","220","80","90","100","110"],"Tap Drill Size Max - Metric":["9.388","9.592","9.49","11.592","11.388","11.49","11.286","13.388","13.184","15.388","15.184","17.388","16.98","19.388","18.98","2.857","2.796","3.255","3.796","3.714","4.194","4.796","4.674","5.694","5.592","6.592","7.694","7.592","7.49"],"Shank Diameter - Metric (d)":["9.6774","9.3218","10.8966","12.192","13.7668","16.5608","3.5814","4.2672","4.9276","6.477","8.0772"],"Pitch":["1.5","1","1.25","1.75","2","2.5","0.35","0.5","0.6","0.7","0.75","0.8"],"Neck Length - Metric (L1)":["39","35","49.1","51.1","54","55","61.8","18","20.3","21.1","25","30"],"Tap Drill Size Min - Metric":["9.235","9.49","9.363","11.49","11.235","11.363","11.108","13.235","12.98","15.235","14.98","17.235","16.725","19.235","18.725","2.822","2.745","3.194","3.745","3.643","4.118","4.745","4.592","5.618","5.49","6.49","7.618","7.49","7.363"],"Square Length - Metric (Ik)":["11.1125","12.7","14.2875","15.875","17.4625","4.7625","6.35","7.9375","9.525"],"Thread Length - Metric (Lc)":["15","17","20","25","6","7.2","8.5","9.1","9.6","10","12"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Chamfer Type":"Modified Bottom (2.5P)","Benefit 4":"Additional length provides greater reach capabilities.","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","Meets 4H Class of Fit":["No","Yes"],"List Name":"LT-S-XPF","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-25","Interrupted Thread":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Meets 2B Class of Fit":"No","Feature 1":"Fluteless Forming Tap","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,60","8002024CA-TP,61"],"Web Literature 4":"800389CA","Meets 3B Class of Fit":"No","Web Literature 2":"800222CA-V5","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Thread Type":["M","MF"],"Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Thread Limit":["D10","D8","D9","D11","D12","D5","D6","D7"],"Stainless Steels : 300":"M; Best","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Titanium : 6AL4V (30HRC)":"S; Good","Meets 6H Class of Fit":["Yes","No"],"Substrate":"HSS-CO","Thread Size - Metric":["M10","M12","M14","M16","M18","M20","M3","M3.5","M4","M4.5","M5","M6","m7","M8"],"Product Overview":"HSS-Co, Long Shank, V-Coating","Units":"Metric","Surface Treatment":"V","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"18mm - 61.8mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 220mm","Shank-Sizes":"3.5814mm - 16.5608mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016355/Taps_-_Tap_-_EXOPRO_XPF-LS_-_List_16355_-_Catalog"],"Friendly Name":"16355"}
FormingTap
{"Chamfer Length - Inch":["0.028125","0.040178","0.046875","0.05625","0.070312","0.09375","0.1125","0.080357","0.125","0.140625","0.160714","0.173076"],"Number of Flutes":"-","Major Diameter - Inch":["0.06","0.086","0.099","0.112","0.138","0.164","0.19","0.25","0.3125","0.375","0.4375","0.5"],"Tap Drill Size Max - Inch":["0.0549","0.078714","0.0905","0.1018","0.12525","0.15125","0.173","0.17725","0.2296","0.235429","0.289833","0.2955","0.3495","0.358","0.408357","0.4171","0.468615","0.4796"],"Neck Length - Inch (L1)":["0.356692","0.476","0.535","0.559","0.685","0.752","0.866","0.996","1.126","1.252","1.713","1.933"],"Threads Per Inch":["80","56","48","40","32","24","20","28","18","16","14","13"],"Tap Drill Size Min - Inch":["0.053625","0.076893","0.088375","0.09925","0.122063","0.148063","0.16875","0.174063","0.2245","0.231786","0.284167","0.29125","0.343125","0.35375","0.401071","0.412","0.460769","0.4745"],"Square Length - Inch (Ik)":["0.1875","0.25","0.3125","0.375","0.4375","0.40625"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.255","0.318","0.381","0.323","0.367"],"Overall Length - Inch (L)":["1.625","1.75","1.813","1.875","2","2.125","2.375","2.5","2.719","2.938","3.156","3.375"],"Thread Length - Inch (Lc)":["0.317322","0.437","0.496","0.295","0.37","0.374","0.492","0.594","0.665","0.752","0.858","0.921"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.191","0.238","0.286","0.242","0.275"],"View Catalog Page":"Here","Coolant Thru":"No","Class of Fit":"2B","Chamfer Type":"Bottom (2.25P)","Benefit 1":"Eliminates the need to choose the correct thread limit","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Brand":"HY-PRO TAP","Feature 1":"2B Class of Fit","Cutting Speed (SFM) - Aluminum : 6061; 7075":"45-100","Cutting Speed (SFM) - Aluminum : Casting":"45-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-100","Cutting Direction":"RH","Product Category":"Forming","Meets 4H Class of Fit":"No","Full Description":"Semi-premium taps made from premium high speed steel for general purpose tapping applications.","Medium Carbon Steel : 1035; 1045":"P; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","List Name":"NRT","Web Literature 1":["8002024CA-TP,89","8002024CA-TP,90"],"Product Overview":"2B, HSS","Meets 3B Class of Fit":"No","Web Literature 4":"800389CA","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","Units":"Inch","Surface Treatment":["BRIGHT","TiN","TiCN"],"STI Thread":"No","Meets 2B Class of Fit":"Yes","Low Carbon Steel : 1010; 1018":"P; Best","Thread Size - Number":["No. 0","No. 2","No. 3","No. 4","No. 6","No. 8","No. 10"],"Short Description":"General Purpose Class of Fit Taps","Substrate":"HSS","Thread Type":["UNF","UNC"],"Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.356692\" - 1.933\"","Taper-Sizes":"-","Overall-Sizes":"1.625\" - 3.375\"","Shank-Sizes":"0.141\" - 0.381\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20285/Taps_-_Tap_-_HY-PRO_SEVEN_-_List_285_-_Forming_Taps_-_Catalog"],"Friendly Name":"285"}
{"Number of Flutes":"-","Major Diameter - Inch":["0.086","0.112","0.138","0.164","0.19","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Chamfer Length - Inch":["0.044642","0.0625","0.052083","0.078125","0.069444","0.104166","0.125","0.089285","0.138888","0.15625","0.178571","0.192307","0.208333","0.227272","0.25","0.277777","0.3125"],"Tap Drill Size Max - Inch":["0.1013","0.1333","0.1299","0.1637","0.159","0.1895","0.187","0.2238","0.216","0.2899","0.2789","0.3568","0.3462","0.4248","0.4091","0.4938","0.4777","0.56","0.5402","0.6282","0.6077","0.6961","0.6702","0.8276","0.8002","0.9606","0.9316","1.0966","1.0658"],"Neck Length - Inch (L1)":["0.718","0.841","0.8","1.003","0.996","1.198","1.196","1.203","1.199","1.377","1.535","1.933","1.712","1.972","2.125","2.165","2.433","2.653","3.011","3.114"],"Threads Per Inch":["56","40","48","32","36","24","20","28","18","16","14","13","12","11","10","9","8"],"Tap Drill Size Min - Inch":["0.0994","0.1309","0.1281","0.1613","0.1569","0.1873","0.1849","0.221","0.2138","0.2868","0.2769","0.3537","0.344","0.4215","0.407","0.4907","0.4758","0.557","0.5383","0.6251","0.6057","0.6928","0.6682","0.8241","0.798","0.9573","0.9297","1.0925","1.0636"],"Square Length - Inch (Ik)":["0.1875","0.25","0.28125","0.3125","0.375","0.4375","0.40625","0.5","0.5625","0.625","0.6875","0.75","0.8125","1","0.875"],"Shank Diameter - Inch (d)":["0.141","0.194","0.168","0.22","0.255","0.318","0.381","0.367","0.323","0.429","0.48","0.542","0.59","0.697","0.652","0.8","1.021","0.896"],"Thread Length - Inch (Lc)":["0.261","0.365","0.364","0.362","0.456","0.449","0.454","0.452","0.605","0.6","0.5","0.555","0.625","0.712","0.767","0.834","0.909","1","1.11","1.251"],"Overall Length - Inch (L)":["2.274","2.554","2.858","2.839","3.257","3.246","3.543","3.937","4.331","4.921","5.512","6.299","7.087"],"Square Width - Inch (k)":["0.11","0.152","0.131","0.165","0.191","0.238","0.286","0.275","0.242","0.322","0.36","0.406","0.442","0.523","0.489","0.6","0.766","0.672"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":"Modified Bottom (2.5P)","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"12-25","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","Meets 4H Class of Fit":"No","List Name":"HL-S-XPF STI","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Feature 1":"Fluteless Forming Tap","Web Literature 1":["8002024CA-TP,320","8002024CA-TP,321"],"Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 4":"800389CA","Units":"Inch","Web Video 1":"https://youtu.be/oHBvbgqfjw0","Web Video 2":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Web Video 3":"https://youtu.be/oHBvbgqfjw0","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Meets 2B Class of Fit":"Yes","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Thread Limit":["H1","H2","H3","h4","H5","h6","H7","H9","H10","h8","H11"],"Stainless Steels : 400":"M; Best","Thread Size - Number":["No. 2","No. 4","No. 6","No. 8","No. 10"],"Medium Carbon Steel : 1035; 1045":"P; Best","Meets 3B Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, V-Coating, STI","Thread Type":["UNC STI","UNF STI"],"Surface Treatment":"V","STI Thread":"Yes","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.718\" - 3.114\"","Taper-Sizes":"-","Overall-Sizes":"2.274\" - 7.087\"","Shank-Sizes":"0.141\" - 1.021\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016260/Taps_-_Tap_-_EXOPRO_XPF_-_List_16260_-_Screw_Thread_Insert_Taps_-_Catalog"],"Friendly Name":"16260"}
Roll tapdrill size
{"Number of Flutes":"-","Square Width - Metric (k)":["4.8514","6.0452","7.2644","6.985","8.1788","9.144","10.3124","12.4206","13.2842","14.478","17.0688","19.4564","21.1074","23.495","27.2288","28.9306"],"Chamfer Length - Inch":["0.098425","0.073818","0.123031","0.088582","0.059055","0.265748","0.177165","0.221456","0.147637","0.172244","0.310039","0.103346","0.19685","0.11811","0.35433","0.442913","0.246062","0.295275","0.531496","0.344488","0.3937","0.044291","0.132874"],"Major Diameter - Metric":["6","7","8","10","12","14","16","18","20","22","24","27","30","33","36","42","45"],"Tap Drill Size Max - Metric":["5.592","5.694","6.592","7.592","7.49","7.694","9.592","9.388","9.49","11.286","11.592","11.388","11.49","13.184","13.388","15.388","15.184","17.388","16.98","19.388","18.98","21.388","21.184","20.98","23.388","23.184","22.776","25.776","28.572","31.572","34.368","40.164","43.164"],"Overall Length - Metric (L)":["80","90","100","110","125","140","160","180","200","220"],"Shank Diameter - Metric (d)":["6.477","8.0772","9.6774","9.3218","10.8966","12.192","13.7668","16.5608","17.7038","19.304","22.7584","25.9334","28.1432","31.3182","36.322","38.5826"],"Pitch":["1","0.75","1.25","1.5","1.75","2","2.5","3","3.5","4","4.5"],"Neck Length - Metric (L1)":["30","35","39","49.1","50.1","54","55","61.8","67.4","68.4","64","72","80","88"],"Tap Drill Size Min - Metric":["5.49","5.618","6.49","7.49","7.363","7.618","9.49","9.235","9.363","11.108","11.49","11.235","11.363","12.98","13.235","15.235","14.98","17.235","16.725","19.235","18.725","21.235","20.98","20.725","23.235","22.98","22.47","25.47","28.215","31.215","33.96","39.705","42.405"],"Square Length - Metric (Ik)":["7.9375","9.525","11.1125","12.7","14.2875","15.875","17.4625","19.05","22.225","25.4","26.9875","28.575","31.75"],"Thread Length - Metric (Lc)":["10","12","15","17","20","25","30","18","21","24","27"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)","Plug (4.5P)"],"Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Coolant Thru":"Yes","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Hardened Steels : 35-45 HRC":"H; Good","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"65-100","Cutting Speed (SFM) - Aluminum : Casting":"75-110","Cutting Speed (SFM) - Aluminum : 6061; 7075":"80-130","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"15-40","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - High Carbon Steel : 1065":"65-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"75-130","Die Steels":"P; Best","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"75-130","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-10","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-10","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-20","Cutting Speed (SFM) - Stainless Steels : 400":"20-45","Interrupted Thread":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Cutting Speed (SFM) - Stainless Steels : 300":"20-50","Feature 1":"Fluteless Forming Tap","Meets 2B Class of Fit":["No","Yes"],"List Name":"OIL-S-XPF","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,47","8002024CA-TP,48","8002024CA-TP,49"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 4":"800389CA","Meets 3B Class of Fit":["No","Yes"],"Web Literature 2":"800222CA-V5","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Thread Type":["M","MF"],"Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Stainless Steels : 300":"M; Best","Thread Limit":["D5","D8","D4","D7","D9","D10","D6","D11","D12","D13","D15","D16","D17"],"Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Meets 4H Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Meets 6H Class of Fit":["Yes","No"],"Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, Coolant Thru, V-Coating","Thread Size - Metric":["M6","m7","M8","M10","M12","M14","M16","M18","M20","M22","M24","M27","M30","M33","M36","M42","M45"],"Units":"Metric","Surface Treatment":"V","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"30mm - 88mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 220mm","Shank-Sizes":"6.477mm - 38.5826mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016150/Taps_-_Tap_-_EXOPRO_XPF-OIL_-_List_16150_-_Forming_Taps_-_Catalog"],"Friendly Name":"16150"}
{"Number of Flutes":"-","Chamfer Length - Inch":["0.059055","0.073818","0.088582"],"Square Width - Metric (k)":["4.9","6.2","8"],"Major Diameter - Metric":["6","8","10"],"Tap Drill Size Max - Metric":["5.592","7.49","9.49","9.388"],"Shank Diameter - Metric (d)":["6","8","10"],"Overall Length - Metric (L)":["80","90","100"],"Pitch":["1","1.25","1.5"],"Neck Length - Metric (L1)":["30","35","39"],"Tap Drill Size Min - Metric":["5.49","7.363","9.363","9.235"],"Square Length - Metric (Ik)":["8","9","11"],"Thread Length - Metric (Lc)":["12","15","18"],"View Catalog Page":"Here","Chamfer Type":"Bottom (1.5P)","Brand":"EXOCARB","Aluminum : 6061; 7075":"N; Best","Benefit 2":"Stable cutting performance","Aluminum : Casting":"N; Best","Benefit 1":"Greater reach capability","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : Casting":"50-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Cutting Direction":"RH","Product Category":"Forming","Interrupted Thread":"No","Feature 2":"Carbide protection on the cutting edge","Feature 1":"DIN Overall Length","Full Description":"The EXOCARB Carbide Forming Taps are design to excel in Alminum and Alminum Casting.","Meets 2B Class of Fit":"No","Notes":"See page 784 for tap drill recommendations.","List Name":"OTC-NRT","Web Literature 1":"8002024CA-TP,62","Meets 3B Class of Fit":"No","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Web Literature 4":"800389CA","Substrate":"Carbide","STI Thread":"No","Product Overview":"Carbide Inlaid, DIN Overall Length, DIN Shank","Thread Limit":"RH7","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Short Description":"Tungsten Carbide Forming Taps","Thread Size - Metric":["M6","M8","M10"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"30mm - 39mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 100mm","Shank-Sizes":"6mm - 10mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014153/Taps_-_Tap_-_EXOCARB_-_List_14153_-_Forming_Taps_-_Catalog"],"Friendly Name":"14153"}
{"Chamfer Length - Inch":["0.03125","0.3125","0.208333","0.039062","0.034722","0.044642","0.052083","0.0625","0.056818","0.078125","0.01875","0.05625","0.069444","0.104166","0.1875","0.046875","0.140625","0.125","0.375","0.416666","0.357142","0.115384","0.192307","0.346153","0.075","0.225","0.089285","0.053571","0.160714","0.023437","0.070312","0.020833","0.5","0.5625","0.026785","0.080357","0.25","0.15","0.45","0.15625","0.09375","0.28125","0.0375","0.1125","0.083333","0.03409","0.102272","0.138888","0.227272","0.40909","0.136363","0.107142","0.178571","0.321428","0.277777","0.166666","0.041666"],"Number of Flutes":"-","Major Diameter - Inch":["0.06","1","0.073","0.086","0.099","0.112","0.125","0.138","0.164","0.19","1.5","1.125","0.5","0.216","1.25","1.375","0.25","1.625","1.75","0.75","0.375","0.3125","0.625","0.4375","0.875","0.5625"],"Tap Drill Size Max - Inch":["0.0549","0.949","0.966","0.066625","0.067333","0.078714","0.079625","0.0905","0.091714","0.1018","0.1035","0.1148","0.115727","0.12525","0.1278","0.15125","0.152666","0.173","0.17725","1.432","1.449","1.091","1.066714","1.074","0.468615","1.466","0.4796","0.199","0.201429","1.216","1.191714","1.199","1.341","1.307","1.324","0.2296","0.235429","1.574","1.6684","1.699","0.7092","0.7245","0.3495","0.358","0.289833","0.2955","0.587909","0.602333","0.408357","0.4171","0.845857","0.829667","0.5285","0.539833"],"Neck Length - Inch (L1)":["0.360236","2.992125","0.36496","0.362992","0.424015","0.420866","0.424409","0.721259","0.720078","0.722047","0.719291","0.805118","0.801574","0.846062","0.842125","0.975196","0.965748","0.96496","0.937007","0.96811","0.961023","0.944881","3.149","2.362","2.834","1.929133","2.677","1.124409","1.121259","1.134251","1.098425","1.129527","1.102362","1.20748","1.219291","1.374015","1.190157","1.18937","1.198031","1.177165","0.368503","0.366141","3.464566","0.427952","0.413385","2.440944","0.429133","0.409448","0.424803","1.574803","0.726771","0.704724","0.724409","0.708661","1.377952","0.727559","0.724015","2.125984","0.812204","0.783464","0.807086","0.787401","1.692913","2.637795","0.853149","0.826771","0.848031","1.968503"],"Threads Per Inch":["80","8","12","64","72","56","48","40","44","32","36","24","6","7","13","20","28","5","10","16","18","11","14","9"],"Tap Drill Size Min - Inch":["0.053625","0.93625","0.9575","0.065031","0.065917","0.076893","0.078031","0.088375","0.089893","0.09925","0.101375","0.11225","0.113409","0.122063","0.12525","0.148063","0.149833","0.16875","0.174063","1.415","1.43625","1.0825","1.052143","1.06125","0.460769","1.4575","0.4745","0.19475","0.197786","1.2075","1.177143","1.18625","1.3325","1.29","1.31125","0.2245","0.231786","1.56125","1.648","1.68625","0.699","0.718125","0.343125","0.35375","0.284167","0.29125","0.578636","0.596667","0.401071","0.412","0.838571","0.818333","0.52","0.534167"],"Square Length - Inch (Ik)":["0.1875","0.8125","0.25","1.125","0.875","0.4375","0.28125","1","1.0625","0.3125","1.25","0.6875","0.375","0.5625","0.40625","0.75","0.5"],"Shank Diameter - Inch (d)":["0.141","0.8","0.168","0.194","1.233","0.896","0.367","0.22","1.021","1.108","0.255","1.305","1.43","0.59","0.381","0.318","0.48","0.323","0.697","0.429"],"Overall Length - Inch (L)":["1.639763","6.299212","5.511811","1.841338","1.83937","1.771653","1.968503","2.204724","2.480314","2.755905","7.874","5.906","7.087","4.330708","6.693","3.937007","3.149606","7.87","8.661","4.921259","3.543307"],"Thread Length - Inch (Lc)":["0.320866","1.251","0.32559","0.323622","0.384645","0.384251","0.381496","0.385039","0.311811","0.311417","0.310629","0.310236","0.312598","0.312204","0.309842","0.309448","0.391732","0.391338","0.388188","0.393307","0.38937","0.530314","0.520866","0.520078","0.492125","0.523228","0.516141","0.5","1","0.835","0.858","0.767","0.522047","0.518897","0.531889","0.496062","0.526377","0.538188","0.509055","0.508267","0.516929","0.329133","0.326771","1.201","0.388582","0.374015","0.389763","0.370078","0.385433","0.625","0.317322","0.295275","0.31496","0.299212","0.555","0.31811","0.314566","0.909","0.398818","0.3937","0.712","1.11","0.400393","0.395275","0.834"],"Square Width - Inch (k)":["0.11","0.6","0.131","0.152","0.925","0.672","0.275","0.165","0.766","0.831","0.191","0.979","1.072","0.442","0.286","0.238","0.36","0.242","0.523","0.322"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)","Plug (4.5P)"],"Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","Meets 4H Class of Fit":"No","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-25","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Feature 1":"Fluteless Forming Tap","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,50","8002024CA-TP,53","8002024CA-TP,51","8002024CA-TP,52"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 4":"800389CA","Web Literature 2":"800222CA-V5","Units":"Inch","List Name":"S-XPF","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Web Video 2":"https://youtu.be/oHBvbgqfjw0","Web Video 3":"https://youtu.be/oHBvbgqfjw0","Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Stainless Steels : 300":"M; Best","Meets 2B Class of Fit":["Yes","No"],"Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Thread Size - Number":["No. 0","No. 1","No. 2","No. 3","No. 4","No. 5","No. 6","No. 8","No. 10","No. 12"],"Stainless Steels : 400":"M; Best","Thread Limit":["H2","H3","H11","h8","H5","h6","h4","H15","H13","H7","H14","H16","H10"],"Medium Carbon Steel : 1035; 1045":"P; Best","Meets 3B Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, V-Coating","Thread Type":["UNF","UNC","UN"],"Surface Treatment":"V","Thread Size - Inch":["1","1-1/2","1-1/8","1/2","1-1/4","1-3/8","1/4","1-5/8","1-3/4","3/4","3/8","5/16","5/8","7/16","7/8","9/16"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.360236\" - 3.464566\"","Taper-Sizes":"-","Overall-Sizes":"1.639763\" - 8.661\"","Shank-Sizes":"0.141\" - 1.43\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016250/Taps_-_Tap_-_EXOPRO_XPF_-_List_16250_-_Forming_Taps_-_Catalog"],"Friendly Name":"16250"}
{"Number of Flutes":"-","Chamfer Length - Inch":["0.104166","0.078125","0.208333","0.125","0.192307","0.089285","0.3125","0.15625","0.25","0.138888","0.0625","0.056818","0.227272","0.178571","0.277777","0.069444"],"Major Diameter - Inch":["0.19","1","0.5","0.216","0.25","0.75","0.375","0.3125","0.625","0.125","0.138","0.4375","0.875","0.164","0.5625"],"Overall Length - Inch (L)":["3.937007","5.905511","7.086614","8.661417","4.724409","4.330708","3.149606"],"Tap Drill Size Max - Inch":["0.173","0.17725","0.966","0.4796","0.468615","0.199","0.201429","0.2296","0.235429","0.949","0.7245","0.7092","0.3495","0.358","0.289833","0.2955","0.602333","0.1148","0.115727","0.587909","0.12525","0.1278","0.408357","0.4171","0.829667","0.845857","0.15125","0.152666","0.5285","0.539833"],"Threads Per Inch":["24","32","12","20","13","28","8","16","10","18","40","44","11","14","9","36"],"Neck Length - Inch (L1)":["0.96496","0.960629","3.011811","1.93307","1.124015","1.120866","1.207086","2.43307","1.574803","1.377952","2.125984","0.721653","0.804724","0.801181","1.712598","2.653543","0.845669","0.841338","1.97244"],"Tap Drill Size Min - Inch":["0.16875","0.174063","0.9575","0.4745","0.460769","0.19475","0.197786","0.2245","0.231786","0.93625","0.718125","0.699","0.343125","0.35375","0.284167","0.29125","0.596667","0.11225","0.113409","0.578636","0.122063","0.12525","0.401071","0.412","0.818333","0.838571","0.148063","0.149833","0.52","0.534167"],"Square Length - Inch (Ik)":["0.25","0.8125","0.4375","0.28125","0.3125","0.6875","0.375","0.5625","0.1875","0.40625","0.75","0.5"],"Shank Diameter - Inch (d)":["0.194","0.8","0.367","0.22","0.255","0.59","0.381","0.318","0.48","0.141","0.323","0.697","0.168","0.429"],"Thread Length - Inch (Lc)":["0.520078","0.515748","1.251968","0.767716","0.521653","0.518503","0.525984","1","0.625984","0.555118","0.909448","0.312204","0.391338","0.387795","0.712598","1.110236","0.392913","0.388582","0.834645"],"Square Width - Inch (k)":["0.152","0.6","0.275","0.165","0.191","0.442","0.286","0.238","0.36","0.11","0.242","0.523","0.131","0.322"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":"Modified Bottom (2.5P)","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","Meets 4H Class of Fit":"No","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","List Name":"LT-S-XPF","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-25","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Feature 1":"Fluteless Forming Tap","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,58","8002024CA-TP,59"],"Web Literature 4":"800389CA","Meets 3B Class of Fit":["No","Yes"],"Web Literature 2":"800222CA-V5","Units":"Inch","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Stainless Steels : 300":"M; Best","Meets 2B Class of Fit":["Yes","No"],"Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Thread Size - Number":["No. 10","No. 12","No. 5","No. 6","No. 8"],"Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Thread Limit":["h6","h8","H7","H5"],"Titanium : 6AL4V (30HRC)":"S; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Long Shank, V-Coating","Thread Type":["UNC","UNF"],"Surface Treatment":"V","Thread Size - Inch":["1","1/2","1/4","3/4","3/8","5/16","5/8","7/16","7/8","9/16"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.721653\" - 3.011811\"","Taper-Sizes":"-","Overall-Sizes":"3.149606\" - 8.661417\"","Shank-Sizes":"0.141\" - 0.8\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016255/Taps_-_Tap_-_EXOPRO_XPF-LS_-_List_16255_-_Catalog"],"Friendly Name":"16255"}
Roll tapvs cuttap
{"Number of Flutes":"-","Chamfer Length - Inch":["0.01875","0.03125","0.039062","0.020833","0.034722","0.026785","0.044642","0.052083","0.0375","0.0625","0.1125","0.09375","0.056818","0.102272","0.046875","0.078125","0.140625","0.069444","0.125","0.104166","0.1875","0.089285","0.160714","0.075","0.225","0.053571","0.083333","0.138888","0.25","0.15625","0.28125","0.178571","0.321428","0.192307","0.346153","0.208333","0.375","0.227272","0.40909","0.45"],"Major Diameter - Inch":["0.06","0.073","0.086","0.099","0.112","0.125","0.138","0.164","0.19","0.216","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75"],"Tap Drill Size Max - Inch":["0.0549","0.066625","0.067333","0.078714","0.079625","0.0905","0.091714","0.1018","0.1035","0.1148","0.115727","0.12525","0.1278","0.15125","0.152667","0.152666","0.173","0.17725","0.199","0.201429","0.2296","0.235429","0.289833","0.2955","0.3495","0.358","0.408357","0.4171","0.468615","0.4796","0.5285","0.539833","0.587909","0.602333","0.7092","0.7245"],"Neck Length - Inch (L1)":["0.356692","0.413385","0.476377","0.535","0.559","0.626","0.685","0.752","0.866","0.933","0.996","1.125984","1.251968","1.712598","1.93307","1.97244","2.125984","2.43307"],"Threads Per Inch":["80","64","72","56","48","40","44","32","36","24","28","20","18","16","14","13","12","11","10"],"Tap Drill Size Min - Inch":["0.053625","0.065031","0.065917","0.076893","0.078031","0.088375","0.089893","0.09925","0.101375","0.11225","0.113409","0.122063","0.12525","0.148063","0.149833","0.16875","0.174063","0.19475","0.197786","0.2245","0.231786","0.284167","0.29125","0.343125","0.35375","0.401071","0.412","0.460769","0.4745","0.52","0.534167","0.578636","0.596667","0.699","0.718125"],"Square Length - Inch (Ik)":["0.1875","0.25","0.28125","0.3125","0.375","0.4375","0.40625","0.5","0.5625","0.6875"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.22","0.255","0.318","0.381","0.323","0.367","0.429","0.48","0.59"],"Overall Length - Inch (L)":["1.625","1.691338","1.688","1.75","1.813","1.875","1.938","2","2.125","2.375","2.5","2.719","2.938","3.156","3.375","3.594","3.813","4.25"],"Thread Length - Inch (Lc)":["0.317322","0.374015","0.437007","0.496","0.295","0.299","0.37","0.374","0.492","0.594","0.665354","0.751968","0.858267","0.921259","1","1.090551","1.200787"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.165","0.191","0.238","0.286","0.242","0.275","0.322","0.36","0.442"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Good","Chamfer Type":["Bottom (1.5P)","Modified Bottom (2.5P)","Plug (4.5P)"],"Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Brand":"HY-PRO TAP","Coolant Thru":"No","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"15-25","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"10-15","Hardened Steels : 35 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-25","Cutting Speed (SFM) - Aluminum : Casting":"45-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-100","Cutting Speed (SFM) - Die Steels":"15-20","Cutting Speed (SFM) - Aluminum : 6061; 7075":"50-90","Cutting Speed (SFM) - High Carbon Steel : 1065":"15-25","Full Description":"HY-PRO NRT Taps Performance Form Taps for Materials < 32Rc","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Product Category":"Forming","Cutting Speed (SFM) - Stainless Steels : 400":"15-40","Die Steels":"P; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","List Name":"NRT","Notes":"Other coatings are available upon request.","Web Literature 1":["8002024CA-TP,70","8002024CA-TP,71","8002024CA-TP,72","8002024CA-TP,73","8002024CA-TP,74","8002024CA-TP,75","8002024CA-TP,76","8002024CA-TP,77","8002024CA-TP,78","8002024CA-TP,79","8002024CA-TP,80","8002024CA-TP,81"],"Units":"Inch","High Carbon Steel : 1065":"P; Best","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":["BRIGHT","Steam Oxide","TiN","TiCN"],"Low Carbon Steel : 1010; 1018":"P; Best","Meets 2B Class of Fit":["Yes","No"],"Thread Size - Number":["No. 0","No. 1","No. 2","No. 3","No. 4","No. 5","No. 6","No. 8","No. 10","No. 12"],"Medium Carbon Steel : 1035; 1045":"P; Best","Thread Limit":["H2","H3","h4","H5","h6","H7","h8","H9","H10","H11","H12","H13","H14"],"Meets 3B Class of Fit":["Yes","No"],"Stainless Steels : 17-4PH":"M; Good","Short Description":"Premium Design for a Wide Range of Materials","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Stainless Steels : 400":"M; Good","Product Overview":"HSS-Co, Forming","Thread Type":["UNF","UNC"],"STI Thread":"No","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.356692\" - 2.43307\"","Taper-Sizes":"-","Overall-Sizes":"1.625\" - 4.25\"","Shank-Sizes":"0.141\" - 0.59\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014001/Taps_-_Tap_-_HY-PRO_NRT_-_List_14001_-_Forming_Taps_-_Catalog"],"Friendly Name":"14001"}
Roll tapdrill size chart
{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985"],"Chamfer Length - Inch":["0.034448","0.023622","0.03937","0.026574","0.044291","0.029527","0.049212","0.035433","0.059055","0.106299","0.041338","0.068897","0.124015","0.047244","0.07874","0.141732","0.098425","0.177165","0.073818","0.123031","0.221456","0.088582","0.147637","0.265748","0.103346","0.172244","0.310039"],"Major Diameter - Metric":["1.6","1.7","2","2.5","2.6","3","3.5","4","5","6","8","10","12"],"Overall Length - Metric (L)":["41.3","42.9","44.3","46","49.2","50.8","54","60.3","63.5","69.1","74.6","85.7"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218"],"Tap Drill Size Max - Metric":["1.457","1.557","1.837","2.316","2.416","2.796","3.255","3.714","4.674","5.592","7.49","9.388","11.286"],"Pitch":["0.35","0.4","0.45","0.5","0.6","0.7","0.8","1","1.25","1.5","1.75"],"Tap Drill Size Min - Metric":["1.422","1.522","1.796","2.271","2.371","2.745","3.194","3.643","4.592","5.49","7.363","9.235","11.108"],"Neck Length - Metric (L1)":["8.9","10.5","12.1","13.8","13.7","16","17.5","19.6","22.2","25.4","28.6","31.8","49.1"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125"],"Thread Length - Metric (Lc)":["7.9","9.5","11.1","12.8","12.7","6.2","8.4","10","12","15","18","21"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Good","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)","Plug (4.5P)"],"Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Brand":"HY-PRO TAP","Coolant Thru":"No","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"15-25","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"10-15","Hardened Steels : 35 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-25","Cutting Speed (SFM) - Aluminum : Casting":"45-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-100","Cutting Speed (SFM) - Die Steels":"15-20","Cutting Speed (SFM) - Aluminum : 6061; 7075":"50-90","Cutting Speed (SFM) - High Carbon Steel : 1065":"15-25","Full Description":"HY-PRO NRT Taps Forming Tap, For a Wide Range of Materials","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Product Category":"Forming","Cutting Speed (SFM) - Stainless Steels : 400":"15-40","Die Steels":"P; Good","Interrupted Thread":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Meets 2B Class of Fit":"No","List Name":"NRT","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request.","Web Literature 1":["8002024CA-TP,82","8002024CA-TP,83","8002024CA-TP,84","8002024CA-TP,85","8002024CA-TP,86","8002024CA-TP,87","8002024CA-TP,88"],"High Carbon Steel : 1065":"P; Best","Thread Type":["M","MF"],"Surface Treatment":["BRIGHT","Steam Oxide","TiN","TiCN"],"Web Literature 4":"800389CA","STI Thread":"No","Thread Limit":["D3","D5","D4","D6","D7","D8","D9","D10","D11","D12","D13","D14"],"Low Carbon Steel : 1010; 1018":"P; Best","Product Overview":"Forming Tap, For a Wide Range of Materials","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Good","Short Description":"Premium Design for a Wide Range of Materials","Meets 4H Class of Fit":["Yes","No"],"Meets 6H Class of Fit":["Yes","No"],"Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Stainless Steels : 400":"M; Good","Thread Size - Metric":["M1.6","M1.7","M2","M2.5","M2.6","M3","M3.5","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"8.9mm - 49.1mm","Taper-Sizes":"-","Overall-Sizes":"41.3mm - 85.7mm","Shank-Sizes":"3.5814mm - 9.6774mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014101/Taps_-_Tap_-_HY-PRO_NRT_-_List_14101_-_Forming_Taps_-_Catalog"],"Friendly Name":"14101"}
{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985"],"Chamfer Length - Inch":["0.034448","0.03937","0.044291","0.029527","0.049212","0.035433","0.059055","0.041338","0.068897","0.047244","0.07874","0.098425","0.073818","0.123031","0.088582","0.147637","0.103346","0.172244"],"Major Diameter - Metric":["1.6","1.7","2","2.5","2.6","3","3.5","4","5","6","8","10","12"],"Overall Length - Metric (L)":["41.3","42.9","44.5","46","47.6","49.2","50.8","54","60.3","63.5","69.1","74.6","85.7"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218"],"Tap Drill Size Max - Metric":["1.457","1.557","1.837","2.316","2.416","2.796","3.255","3.714","4.674","5.592","7.49","9.592","9.388","11.286","9.49"],"Pitch":["0.35","0.4","0.45","0.5","0.6","0.7","0.8","1","1.25","1.5","1.75"],"Tap Drill Size Min - Metric":["1.422","1.522","1.796","2.271","2.371","2.745","3.194","3.643","4.592","5.49","7.363","9.49","9.235","11.108","9.363"],"Neck Length - Metric (L1)":["8.9","10.5","12.1","13.8","13.7","16","17.5","19.6","22.2","25.4","28.6","31.8","49"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125"],"Thread Length - Metric (Lc)":["7.9","9.5","11.1","12.8","12.7","6.2","8.4","9.6","12","15","18","21"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)"],"Brand":"EXOTAP","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"15-30","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"10-15","Hardened Steels : 35 HRC":"H; Good","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-130","Cutting Speed (SFM) - Die Steels":"15-20","Cutting Speed (SFM) - Aluminum : Casting":"65-130","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Cutting Speed (SFM) - High Carbon Steel : 1065":"15-30","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Stainless Steels : 300":"15-50","Cutting Speed (SFM) - Stainless Steels : 400":"15-50","Interrupted Thread":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Full Description":"EXOTAP NRT Taps Performance Form Taps for Materials < 32Rc","Meets 2B Class of Fit":"No","Web Literature 1":["8002024CA-TP,68","8002024CA-TP,69"],"Meets 3B Class of Fit":"No","High Carbon Steel : 1065":"P; Best","List Name":"VP-NRT","Thread Type":["M","MF"],"Web Literature 4":"800389CA","STI Thread":"No","Product Overview":"CPM, V-coating","Thread Limit":["D3","D5","D4","D6","D7","D8","D9","D10","D11"],"Stainless Steels : 300":"M; Best","Low Carbon Steel : 1010; 1018":"P; Best","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Good","Short Description":"Premium Powder Metal High Speed Steel","Meets 4H Class of Fit":["Yes","No"],"Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M1.6","M1.7","M2","M2.5","M2.6","M3","M3.5","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"8.9mm - 49mm","Taper-Sizes":"-","Overall-Sizes":"41.3mm - 85.7mm","Shank-Sizes":"3.5814mm - 9.6774mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014150/Taps_-_Tap_-_EXOTAP_NRT_-_List_14150_-_Forming_Taps_-_Catalog"],"Friendly Name":"14150"}
{"Number of Flutes":"-","Chamfer Length - Inch":["0.07874","0.03937","0.055118","0.125984","0.062992","0.19685","0.098425","0.23622","0.11811","0.27559","0.137795"],"Square Width - Metric (k)":["3.2","4","4.5","5","5.5","6.5"],"Major Diameter - Metric":["3","4","5","6","8","10","12"],"Overall Length - Metric (L)":["46","52","60","62","70","75","82"],"Tap Drill Size Max - Metric":["2.796","3.714","4.674","5.592","7.49","9.388","9.49","11.286","11.388","11.49"],"Shank Diameter - Metric (d)":["4","5","5.5","6","6.2","7","8.5"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["19","21","23.9","29"],"Tap Drill Size Min - Metric":["2.745","3.643","4.592","5.49","7.363","9.235","9.363","11.108","11.235","11.363"],"Square Length - Metric (Ik)":["6","7","8","9"],"Thread Length - Metric (Lc)":["10","13","15.9","19","22","24","29"],"Coolant Thru":"No","Chamfer Type":["Plug (4P)","Bottom (2P)"],"Benefit 3":"Provides High hardness with improved wear resistance and Increased production levels with longer tool life.","Benefit 2":"Provides versatile use in both through and blind hole applicaitons","Brand":"EXOCARB","Aluminum : 6061; 7075":"N; Best","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Aluminum : Casting":"N; Best","Cutting Speed (SFM) - Aluminum : Casting":"50-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Feature 1":"Micrograin carbide body","Cutting Direction":"RH","Product Category":"Forming","Feature 2":"Plug and Bottom","Meets 4H Class of Fit":["No","Yes"],"Interrupted Thread":"No","Full Description":"The EXOCARB Carbide Forming Taps are design to excel in Alminum and Alminum Casting. TiAIN and TiCN coatings are available upon requests for an extended tool life.","Feature 3":"TiCN and TiALN coatings available upon requests","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","List Name":"OT-NRT","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Substrate":"Carbide","STI Thread":"No","Product Overview":"Forming Tap, JIS","Thread Limit":["RH5","RH6","RH7","RH8"],"Meets 6H Class of Fit":"Yes","Short Description":"Tungsten Carbide Forming Taps","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Units":"Metric","View Catalog Page":"Here","Web Literature 1":"8002024CA-TP,63","Web Literature 4":"800389CA","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"19mm - 29mm","Taper-Sizes":"-","Overall-Sizes":"46mm - 82mm","Shank-Sizes":"4mm - 8.5mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20369/Taps_-_Tap_-_EXOCARB_-_List_369_-_Forming_Taps_-_Catalog"],"Friendly Name":"369"}
{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.8608","4.8514","6.0452","7.2644","6.985","8.1788","10.3124","11.2268","13.2842","14.478","15.24","17.0688"],"Chamfer Length - Inch":["0.03937","0.044291","0.049212","0.068897","0.07874","0.098425","0.123031","0.147637","0.172244","0.19685","0.246062","0.295275"],"Major Diameter - Metric":["2","2.5","3","4","5","6","8","10","12","14","16","18","20","22","24"],"Overall Length - Metric (L)":["50","56","63","70","80","90","100","110","125","140","160"],"Shank Diameter - Metric (d)":["3.5814","4.9276","6.477","8.0772","9.6774","9.3218","10.8966","13.7668","14.986","17.7038","19.304","20.32","22.7584"],"Tap Drill Size Max - Metric":["2.35","2.888","3.428","4.591","5.672","6.831","9.025","11.233","13.431","15.631","17.631","19.999","21.999","23.999","26.376"],"Pitch":["0.4","0.45","0.5","0.7","0.8","1","1.25","1.5","1.75","2","2.5","3"],"Tap Drill Size Min - Metric":["2.317","2.851","3.387","4.539","5.608","6.761","8.946","11.145","13.333","15.519","17.519","19.868","21.868","23.868","26.228"],"Neck Length - Metric (L1)":["9.21","18.26","21.32","25.37","30.46","35","39","49.1","50.1","55","61.8","67.4","68.4","76.5","79.1"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125","12.7","15.875","17.4625","19.05","20.6375","22.225"],"Thread Length - Metric (Lc)":["8","6","7","10","11","12","15","17","20","25","30"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Chamfer Type":"Modified Bottom (2.5P)","Benefit 4":"Additional length provides greater reach capabilities.","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"12-25","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","List Name":"HL-S-XPF STI","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","Interrupted Thread":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Meets 2B Class of Fit":"No","Feature 1":"Fluteless Forming Tap","Web Literature 1":"8002024CA-TP,322","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 4":"800389CA","Meets 3B Class of Fit":"No","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Thread Type":"M STI","Stainless Steels : 17-4PH":"M; Best","Thread Limit":["D3","D4","D5","D6","D8","D9","D10","D11"],"Stainless Steels : 300":"M; Best","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Meets 4H Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Meets 6H Class of Fit":"Yes","Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, V-Coating, STI","Thread Size - Metric":["M2","M2.5","M3","M4","M5","M6","M8","M10","M12","M14","M16","M18","M20","M22","M24"],"Units":"Metric","Surface Treatment":"V","STI Thread":"Yes","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"9.21mm - 79.1mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 160mm","Shank-Sizes":"3.5814mm - 22.7584mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016360/Taps_-_Tap_-_EXOPRO_XPF_-_List_16360_-_Screw_Thread_Insert_Taps_-_Catalog"],"Friendly Name":"16360"}
{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985","8.1788","9.144","10.3124","12.4206","13.2842","14.478","17.0688","19.4564","21.1074","23.495","27.2288","28.9306"],"Chamfer Length - Inch":["0.03937","0.049212","0.034448","0.068897","0.07874","0.098425","0.073818","0.123031","0.088582","0.059055","0.265748","0.177165","0.221456","0.147637","0.103346","0.014763","0.024606","0.044291","0.310039","0.172244","0.19685","0.11811","0.35433","0.017716","0.029527","0.053149","0.020669","0.062007","0.442913","0.246062","0.023622","0.295275","0.531496","0.070866","0.026574","0.079724","0.344488","0.035433","0.106299","0.3937","0.041338","0.124015","0.132874","0.047244","0.141732"],"Major Diameter - Metric":["2","3","4","5","6","7","8","10","12","1.2","1","14","1.4","16","1.6","1.7","18","1.8","20","22","24","2.5","2.6","27","30","33","3.5","36","42","45","4.5"],"Overall Length - Metric (L)":["45","56","63","70","80","90","100","110","40","125","140","160","50","180","200","220"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218","10.8966","12.192","13.7668","16.5608","17.7038","19.304","22.7584","25.9334","28.1432","31.3182","36.322","38.5826"],"Tap Drill Size Max - Metric":["1.837","2.796","2.857","3.796","3.714","4.796","4.674","5.592","5.694","6.592","7.592","7.49","7.694","9.592","9.388","9.49","11.592","11.388","11.286","11.49","1.098","0.898","13.184","13.388","1.278","15.388","15.184","1.457","1.557","17.388","16.98","1.657","19.388","18.98","21.388","21.184","20.98","23.388","23.184","22.776","2.316","2.416","25.776","28.572","31.572","3.255","34.368","40.164","43.164","4.194"],"Pitch":["0.4","0.5","0.35","0.7","0.8","1","0.75","1.25","1.5","1.75","0.25","2","0.3","2.5","3","0.45","3.5","0.6","4","4.5"],"Tap Drill Size Min - Metric":["1.796","2.745","2.822","3.745","3.643","4.745","4.592","5.49","5.618","6.49","7.49","7.363","7.618","9.49","9.235","9.363","11.49","11.235","11.108","11.363","1.073","0.873","12.98","13.235","1.247","15.235","14.98","1.422","1.522","17.235","16.725","1.622","19.235","18.725","21.235","20.98","20.725","23.235","22.98","22.47","2.271","2.371","25.47","28.215","31.215","3.194","33.96","39.705","42.705","4.118"],"Neck Length - Metric (L1)":["9","18","21.1","25","30","35","39","49.1","6.5","50.1","8","54","55","61.8","67.4","68.4","10.8","64","72","20.3","80","88","25.1"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125","12.7","14.2875","15.875","17.4625","19.05","22.225","25.4","26.9875","28.575","31.75"],"Thread Length - Metric (Lc)":["8","6","8.5","9.6","10","12","15","17","5.5","20","7","25","30","9.8","18","21","7.2","24","27","9.1"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)","Plug (4.5P)"],"Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-25","Interrupted Thread":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Meets 2B Class of Fit":["No","Yes"],"Feature 1":"Fluteless Forming Tap","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,54","8002024CA-TP,55","8002024CA-TP,56","8002024CA-TP,57"],"Web Literature 4":"800389CA","Meets 3B Class of Fit":["No","Yes"],"Web Literature 2":"800222CA-V5","List Name":"S-XPF","Web Video 1":"https://youtu.be/oHBvbgqfjw0","Web Video 2":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Web Video 3":"https://youtu.be/oHBvbgqfjw0","Thread Type":["M","MF"],"Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Thread Limit":["D3","D5","D4","D6","D7","D8","D9","D10","D11","D12","D13","D15","D16","D17"],"Stainless Steels : 300":"M; Best","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Meets 4H Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Meets 6H Class of Fit":["Yes","No"],"Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, V-Coating","Thread Size - Metric":["M2","M3","M4","M5","M6","m7","M8","M10","M12","M1.2","M1","M14","M1.4","M16","M1.6","M1.7","M18","M1.8","M20","M22","M24","M2.5","M2.6","M27","M30","M33","M3.5","M36","M42","M45","M4.5"],"Units":"Metric","Surface Treatment":"V","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"6.5mm - 88mm","Taper-Sizes":"-","Overall-Sizes":"40mm - 220mm","Shank-Sizes":"3.5814mm - 38.5826mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016350/Taps_-_Tap_-_EXOPRO_XPF_-_List_16350_-_Forming_Taps_-_Catalog"],"Friendly Name":"16350"}
{"Number of Flutes":"-","Chamfer Length - Inch":["0.07874","0.098425","0.11811","0.137795"],"Overall Length - Metric (L)":["100","150"],"Square Width - Metric (k)":["4.5","5","5.5","6.5"],"Major Diameter - Metric":["6","8","10","12"],"Tap Drill Size Max - Metric":["5.592","7.49","9.388","9.49","11.286","11.388","11.49"],"Shank Diameter - Metric (d)":["6","6.2","7","8.5"],"Pitch":["1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["29"],"Tap Drill Size Min - Metric":["5.49","7.363","9.235","9.363","11.108","11.235","11.363"],"Square Length - Metric (Ik)":["7","8","9"],"Thread Length - Metric (Lc)":["19","22","24","29"],"View Catalog Page":"Here","Coolant Thru":"No","Benefit 3":"Provides High hardness with improved wear resistance and Increased production levels with longer tool life.","Chamfer Type":"Bottom (2P)","Brand":"EXOCARB","Aluminum : 6061; 7075":"N; Best","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Aluminum : Casting":"N; Best","Benefit 2":"Greater reach capability","Cutting Speed (SFM) - Aluminum : Casting":"50-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Feature 2":"Long Shank","Feature 1":"Micrograin carbide body","Cutting Direction":"RH","Product Category":"Forming","Interrupted Thread":"No","Full Description":"The EXOCARB Carbide Forming Taps are design to excel in Cast iron and Aluminum. TiAIN and TiCN coatings are available upon requests for an extended tool life.","Feature 3":"TiCN and TiALN coatings available upon requests","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,64","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","List Name":"OT-LT-NRT","Web Literature 4":"800389CA","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Substrate":"Carbide","STI Thread":"No","Product Overview":"Forming Tap, Long Shank, JIS","Thread Limit":["RH7","RH8"],"Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Short Description":"Tungsten Carbide Forming Taps","Thread Size - Metric":["M6","M8","M10","M12"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"29mm","Taper-Sizes":"-","Overall-Sizes":"100mm - 150mm","Shank-Sizes":"6mm - 8.5mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20357/Taps_-_Tap_-_EXOCARB_-_List_357_-_Forming_Taps_-_Catalog"],"Friendly Name":"357"}
0086-813-8127573