Great bit ! I also have the 1/8 drill bit . Both are great and of you need to drill a hole. These bits are great in and safer than using a A router bit.

Slot millingtool

Designed to leave a superbly clean hole, this extreme-performance carbide 1/4" drill bit is made for CNC router machine owners who want to get their holes drilled hyper-fast.

Made of solid carbide, peck drilling is completely eliminated with the Lightning drill bits. The dual grind plus fast-spiral design gives this CNC router drill the ability to get the job done super fast.

Slot millingtechniques

When it comes to CNC drill bits, this 1/4" carbide drill bit cannot be matched in performance. It is designed to get chips out of the way fast with high plunge rates and no peck drilling.

T-Slotmillingcutter

Run the 1/4" Lightning drill bit at 10,000 RPM at 50 inches per minute, and each hole is complete in less than2 seconds. Compared to standard CNC drill bits, which can take up to a minute per hole.

This bit will last through hundreds of boards if you follow the feeds & speeds listed below. This 1/4" cribbage board drill bit can also be used for aluminum, brass, /steel acrylic, and other materials.

Slotmill vs end mill

This 1/4" drill bit is made for CNC routers machine owners who want to get their holes drilled hyper-fast. The "Lightning" series drill bits for CNC routers are designed to get chips out of the way fast with high plunge rates and no peck drilling. Run at 10,000 RPM at 50 inches per minute, and each hole is complete in about 2 seconds.

Used it for the first time to make myself a router bit tray and it worked well. Works exactly as intended and I would rate the quality very high, comparable to Whiteside and frued bits!

T-slotmilling

These high-speed drills cut super clean very efficient almost silently into the wood. designed to perfection. I love them so much. I bought an extra set after trying them out because I don’t want to be without one.

If you are planning on making a DIY cribbage board game, you want the holes to be perfectly positioned. Whether you are making it by hand with a drilling jig or on a CNC router, choosing any drill can lead to problems in your project. They are stated below.

If you want to add the Lightning Series 1/8" drill bit for CNC routers to your collection, to make DIY Cribbage board projects, click here to see the fastest drill on the planet for CNC routers.