Lyrical Flute Miniatures - miniature flute

2024-07-02 18:13:59

DOC stands for Depth of Cut and is the depth the tool penetrates the material along its axis, perpendicular to the surface being machined. It's usually determined by the cutting-edge length of the tool and how much of the tool is engaged with the material.

Harvey locationsnear me

WOC stands for Width of Cut and it refers to the width of the material engaged by the cutting tool in the direction parallel to the workpiece surface. This depth is less than the tool's diameter.

Harvey's coupons

This video provides a clear guide on how to calculate the feeds and speeds for a tool. The linked website offers valuable resources, including feed per tooth and surface meter per minute values, based on the tool and stock material to assist in determining the appropriate feeds and speeds.

“We have a good presence in Ontario, so we are continuing to look at different footprints for Ontario, and in Quebec, there are lots of opportunities for us to expand,” Nault added.

Harvey's

Speaking to Retail Insider, Michael Nault, chief operating officer at Harvey’s, shared that the chain would look to expand with up to 500 restaurants in Canada over the next five to 10 years.

Harvey's menu

Surface Meter per Minute (SMM), similar to Surface Feet per Minute but using metric units, indicates the speed at which the tool's cutting edge moves relative to the material's surface. Like the feed per tooth, it varies depending on the material and the type of cutter used. This data is also available online.

“Harvey’s has set out a target of 500 locations over the next five to 10 years, and I’d say that we are continuing to work towards that target and build opportunities,” Nault said.

You might also like:Dairy Queen is launching a bunch of new Blizzards across CanadaTim Hortons says there's "no merit" in proposed Roll Up To Win class action lawsuitBravo stars Jax Taylor and Tom Schwartz gush over Canada's food scene

Feed per tooth is the amount of material removed by each tooth of the cutter during one spindle revolution. This is usually measured in millimetres per tooth or inches per tooth. The appropriate value depends on the material being cut (such as metal, plastics, or plywood) and the type of cutter used (e.g., coated or uncoated carbide). You can typically find this information online.

Harvey locationsin canada

Now that you know how to calculate feeds and speeds, you can apply this knowledge by setting up your tool in Fusion 360 to proceed with the CAM operations. The next video demonstrates how to create your own tool library in Fusion 360.

The selection of the DOC and WOC must balance efficiency and the need to minimize tool wear and potential damage to the workpiece. Deep cuts in the axial and radial axis can be more efficient but might lead to higher forces on the tool and workpiece, while shallow cuts are generally less efficient but can achieve better surface finishes and extend tool life.

Harvey's near me menu

Harvey locationsmap

Nault told the publication that Harvey’s, which just celebrated its 65th anniversary, currently has 300 outposts across Canada.

“We are on pace and still working towards that as our target – so we are going to place Harvey’s in the hands of more people across the country.”

“Whether it is a gas station, a mall, or just our traditional footprints, we will continue to look for those opportunities across the board,” Nault said.

Feeds and speeds are critical parameters in machining operations. Feeds refer to the rate at which the cutting tool advances through the material, typically measured in inches or mm per minute, and are essential for balancing material removal rates with effective chip clearance. Inadequate feed rates can lead to tool breakage or chip clogging. Speeds concern the spindle RPM (revolutions per minute), influencing tool temperature and wear. Proper spindle speeds prevent the tool from overheating, which can soften and dull the cutting edge, resulting in poor surface quality or tool failure. Both feeds and speeds are vital for optimizing tool life, enhancing machining efficiency, and ensuring superior surface finishes