Modify the spindle height with the rapid downfeed, or use the micro downfeed to adjust down to 0.001" (one full revolution is 0.060").

The G8689Z 4" x 16" Mini Milling Machine can power through up to 1/2" drilling, 1/2" end mills, and 1" facing for the consistent results you need.

Modify the spindle height with the rapid downfeed, or use the micro downfeed to adjust down to 0.001" (one full revolution is 0.060").

Mini MetalMillingMachine

The Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts for the mill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 1/2 HP, 110V, single-phase, 4.5A Spindle taper: R-8 Spindle speeds: Variable, 0-1100 and 0–2500 RPM Maximum distance spindle to table: 10-1/2" Maximum distance spindle-to-column: 6-3/8" Table size: 15-3/4" x 3-5/8" T-slots: 3 @ 1-1/8" centers, 1/2" wide Table travel (longitudinal): 9-1/8" Table travel (cross): 4" Head travel: 9-1/2" Column tilt: 45° L/R Drilling capacity: 1/2" mild steel End milling capacity: 1/2" Face milling capacity: 1" Overall size: 20" W x 20" D x 30" H Approximate shipping weight: 135 lbs. FEATURES: 1/2" drilling capacity in steel and cast iron Adaptable R8 spindle Two variable-speed spindle ranges on a geared drive Fine feed head control Zero-setting dials on handwheels w/0.001" graduations Adjustable dovetail ways on column Adjustable depth stop Clear chip guard on spindle Rubber chip guards on ways INCLUDES: 1/32"–1/2" JT33 drill chuck R-8 x JT33 arbor Two 3/8"-16 T-slot nuts 3, 4, 5, 6mm hex wrenches 8 x 10, 14 x 17, 17 x 19, 36mm open-end wrenches 45–52mm spanner wrench Oil bottle

The G8689Z manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts for the mill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 1/2 HP, 110V, single-phase, 4.5A Spindle taper: R-8 Spindle speeds: Variable, 0-1100 and 0–2500 RPM Maximum distance spindle to table: 10-1/2" Maximum distance spindle-to-column: 6-3/8" Table size: 15-3/4" x 3-5/8" T-slots: 3 @ 1-1/8" centers, 1/2" wide Table travel (longitudinal): 9-1/8" Table travel (cross): 4" Head travel: 9-1/2" Column tilt: 45° L/R Drilling capacity: 1/2" mild steel End milling capacity: 1/2" Face milling capacity: 1" Overall size: 20" W x 20" D x 30" H Approximate shipping weight: 135 lbs. FEATURES: 1/2" drilling capacity in steel and cast iron Adaptable R8 spindle Two variable-speed spindle ranges on a geared drive Fine feed head control Zero-setting dials on handwheels w/0.001" graduations Adjustable dovetail ways on column Adjustable depth stop Clear chip guard on spindle Rubber chip guards on ways INCLUDES: 1/32"–1/2" JT33 drill chuck R-8 x JT33 arbor Two 3/8"-16 T-slot nuts 3, 4, 5, 6mm hex wrenches 8 x 10, 14 x 17, 17 x 19, 36mm open-end wrenches 45–52mm spanner wrench Oil bottle

Mini Mill with DRO

This benchtop mill features the highly stable R8 spindle that offers versatility, quick and easy tool changes, and exceptional accuracy.

The Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts for the mill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.

This mini milling machine also includes a clear chip guard on the spindle and a rubber chip guard on the ways for safety.

Best minimillingmachine

This mini milling machine also includes a clear chip guard on the spindle and a rubber chip guard on the ways for safety.

You can now return your online order in a few easy steps. Select your preferred tracked returns service. We have print at home, paperless and collection options available.

Used Mini Mill for sale

The headstock adjusts up and down the column and tilts 45° left or right relative to the table, and adaptable dovetail ways offer precision and rigidity.

The Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts for the mill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 1/2 HP, 110V, single-phase, 4.5A Spindle taper: R-8 Spindle speeds: Variable, 0-1100 and 0–2500 RPM Maximum distance spindle to table: 10-1/2" Maximum distance spindle-to-column: 6-3/8" Table size: 15-3/4" x 3-5/8" T-slots: 3 @ 1-1/8" centers, 1/2" wide Table travel (longitudinal): 9-1/8" Table travel (cross): 4" Head travel: 9-1/2" Column tilt: 45° L/R Drilling capacity: 1/2" mild steel End milling capacity: 1/2" Face milling capacity: 1" Overall size: 20" W x 20" D x 30" H Approximate shipping weight: 135 lbs. FEATURES: 1/2" drilling capacity in steel and cast iron Adaptable R8 spindle Two variable-speed spindle ranges on a geared drive Fine feed head control Zero-setting dials on handwheels w/0.001" graduations Adjustable dovetail ways on column Adjustable depth stop Clear chip guard on spindle Rubber chip guards on ways INCLUDES: 1/32"–1/2" JT33 drill chuck R-8 x JT33 arbor Two 3/8"-16 T-slot nuts 3, 4, 5, 6mm hex wrenches 8 x 10, 14 x 17, 17 x 19, 36mm open-end wrenches 45–52mm spanner wrench Oil bottle

Mini asphaltmillingmachine

Standard Delivery $6.99 Find out more

Our extended Christmas returns policy runs from 28th October until 5th January 2025, all items purchased online during this time can be returned for a full refund.

Store Delivery $6.99 Find out more

The variable-speed control and gear drive save you time and hassle as you switch between projects. The G8689Z has two speed ranges: low range 0–1100 RPM, and high range 0–2500 RPM.

The G8689Z manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts for the mill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 1/2 HP, 110V, single-phase, 4.5A Spindle taper: R-8 Spindle speeds: Variable, 0-1100 and 0–2500 RPM Maximum distance spindle to table: 10-1/2" Maximum distance spindle-to-column: 6-3/8" Table size: 15-3/4" x 3-5/8" T-slots: 3 @ 1-1/8" centers, 1/2" wide Table travel (longitudinal): 9-1/8" Table travel (cross): 4" Head travel: 9-1/2" Column tilt: 45° L/R Drilling capacity: 1/2" mild steel End milling capacity: 1/2" Face milling capacity: 1" Overall size: 20" W x 20" D x 30" H Approximate shipping weight: 135 lbs. FEATURES: 1/2" drilling capacity in steel and cast iron Adaptable R8 spindle Two variable-speed spindle ranges on a geared drive Fine feed head control Zero-setting dials on handwheels w/0.001" graduations Adjustable dovetail ways on column Adjustable depth stop Clear chip guard on spindle Rubber chip guards on ways INCLUDES: 1/32"–1/2" JT33 drill chuck R-8 x JT33 arbor Two 3/8"-16 T-slot nuts 3, 4, 5, 6mm hex wrenches 8 x 10, 14 x 17, 17 x 19, 36mm open-end wrenches 45–52mm spanner wrench Oil bottle

The variable-speed control and gear drive save you time and hassle as you switch between projects. The G8689Z has two speed ranges: low range 0–1100 RPM, and high range 0–2500 RPM.

This benchtop mill features the highly stable R8 spindle that offers versatility, quick and easy tool changes, and exceptional accuracy.

The G8689Z 4" x 16" Mini Milling Machine can power through up to 1/2" drilling, 1/2" end mills, and 1" facing for the consistent results you need.

*By submitting your email address, you agree to receive marketing emails from doulakisparts.gr. Click here to read our privacy policy & terms and conditions

MiniMillingMachine price

The Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts for the mill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.

The headstock adjusts up and down the column and tilts 45° left or right relative to the table, and adaptable dovetail ways offer precision and rigidity.