MagnusonsuperchargerTacoma

Fix the wire to the tip of the soldering gun/iron, with a piece sticking out in front forming the secondary soldering tip. Use the pliers if necessary to make sure the contact between the wire and the soldering tip is good, otherwise the heat conduction will be poor. Cut the protruding wire tip to the shortest length you need, which will provide the most heat.

Magnusonsupercharger6.0 LS

This world exclusive Bullet designed kit is perfect for the owners of a 2UZ-FE engine between the years of 1998 & 2007 who tow or use their vehicle for off road workouts. The Positive displacement Supercharger system has been developed with reliability being the main focus. Small boost levels of only 5 psi allow the engine to comfortably perform without stressing internal components, whilst delivering exceptional power and torque increases.

After having designed the world first Supercharger kit back in 2005 when the Hilux was first released, Bullet Cars has recently introduced the new intercooled Mp90 Supercharger kit as an aftermarket option. The Magnuson Intercooled Supercharger is the basis of this new kit with Bullet modifications to simplify installation to any 4.0 litre V6 Hilux.

MagnusonsuperchargerLS1

MagnusonSuperchargerLS3

We're going to attach a piece of wire to the tip of the soldering gun/iron to act as a smaller, secondary tip. Snip off a piece of wire slightly longer than you think you will need, and bend it with a pair of pliers to ready it for fixing it to the soldering tip.

MagnusonSuperchargerTundra

Heat up your soldering gun/iron, and melt the hole(s) in the plastic. The shorter the wire tip, the more efficient this method will be.

The substantial increase in Power and Torque is due to the positive displacement Magnuson Mp90 supercharger that gives you Maximum boost from off idle all the way to the redline. This makes it perfect for towing or four wheel driving when you need low down torque. With just 5.5psi of pressure, power gains of over 45% can be safely achieved on an internally stock engine. (BOOST UPGRADE AVAILABLE).

Whether you are out in the hot desert exploring or working the vehicle hard in low range on a sandy beach, the high efficiency Water to Air Intercooler located internally within the manifold stabilises air intake temperatures to deliver safe, consistent power across a broad range of temperatures.

Fuel Economy remains the same (if not better) on average due to the increased torque available from the engine, with returns of under 12 liters per 100km easily achievable. More power is developed down lower in the engine rev range meaning the engine does not have to rev as hard to produce the same level of power. This is most noticeable when towing up a hill ‘ the gearbox does not have to downshift as often as more torque is available through the mid range.

Boost up your Ford Mustang GT’s full potential with this Harrop Supercharger Kit utilising the largest, most efficient rotating group ever produced by Eaton. The TVS2650 Supercharger Kit transforms the 5.0L V8 into a powerful and efficient monster.

MagnusonSupercharger4Runner

Sometimes you need to make small holes in plastic items, and don't have suitable instruments like a thin enough drill bit. Then this method using a soldering gun could come in handy.

This is possibly the best bolt-on performance improvement available for the LS1/2/6 variants including L76/98 for your Holden VZ. The package delivers exhilarating yet totally affordable supercharger performance, representing exceptional value and reliability for your . The increase in usable torque is outstanding, while maintaining (and consistently improving) fuel economy. This kit is available to suit the VZ electronic, including LS2/76/98 electronic throttle control.