Aluminummilling speed chart

Installed in an Okuma Genos 460 machining center, the system uses a servo motor and encoder to identify the tool position and will send a signal to the CNC machine control when it identifies a broken part.

This optional system saves considerable cycle time over tool breakage detectors that must intrude on the cutting area to check drills or taps.

Millingspeeds and FeedschartMetric

Feeds and speeds are starting recommendations only. Factors such as machine, fixture and tooling rigidity, horsepower available, coolant application and others will affect the performance significantly. Please read machine operators instructions and use all safety shields and glasses before performing these operations.

If you require service any time, day or night, just one call to 866.385.2798 gets you a fast, reliable response from Gosiger service.

Millingspeeds and feedschartpdf

Undetected broken drills or taps are notorious time and materials wasters. Almost as bad is a detection system that interrupts the machining process to check the tools. In this video Gosiger engineers demonstrate how a BK Mikro checking device can be used in-magazine to check for tool breakage outside of the cutting area.

If you don’t see a speeds and feeds chart for the product you are working with please contact Rock River Tool at 800-345-8924 or send us a message through our Contact Us page and we will provide you with feeds and speeds. Please include as much information about the material you are machining as possible.