RouterBit Set

All items require prior authorization before returning. To initiate a return, please contact our customer service department for authorization and return instructions:

At HValley Tools, we stand behind the quality of our products. If you are not completely satisfied with your purchase for any reason, we will gladly refund your money or issue in-store credit (for merchandise only) within 60 days of the original purchase date.

1 8 shank router bitshome depot

We hate backorders too. Backordered items will be released and shipped automatically as soon as they are available. For credit card orders, backordered items will not be charged to your card until the item ships. Backordered items will be shipped with no additional shipping charge (in the contiguous USA).

The Eagle America Brand was created for the professional woodworker who needs a serious router bit with an exceptional cut, extremely high durability and longevity.

1/8 round overrouterbit

ProfileRouter bits

Precision ground carbide to +/- .005 tolerances and Balanced to speeds in excess of 25,000 RPM for true, chatter-free running.

Note: Engineers may prefer a Spot Drill which is a short stubby drill designed specifically for this purpose. Alternatively, a small indentation can be cut in the bar centre with a sharp lathe tool.

Largerouter bits

A Centre Drill can also be used to provide a start location for a drill when drilling down the centre of a bar held in a Lathe chuck. Centre Drills are short and rigid enough to mark the bar centre without wandering off if they are carefully offered up to a rotating work-piece. Although their point angle does not match that a Twist Drill only a small indentation is required, so for most work in Design and Technology, this is not an issue.

EAGLE AMERICA Spiral Router Bits with 1/8" Shanks are designed for CNC routers, Trim Routers, Dremels, Rotozip and small projects.These bits are solid carbide and have upcut and downcut options. These bits are production quality, designed for clean-cutting and non-clogging effective chip removal. Most bits two flute, Solid Carbide. Made in the USA.

TungstenRouter Bits

Centre Drills (aka Slocombe Drills) were designed to provide a location for a Tailstock Centre (hence their 60deg point angle) but are commonly used to make a small starting indentation to guide further drilling in a Lathe.

Downcut Bits cut slower and push chips away from the router to eliminate top surface splintering. Use for pattern cutting or when going completely through the board as it allows clear vision of the cutting line. Ideal for fine finish work such as veneers, laminates, inlays and repairs because they prevent upper edge tear outs. Use Down-cuts for trimming and sizing.

1/8routerbit 1/4''shank

Also known as Slocombe Drills, Centre Drills were originally designed to create the countersink required to locate a tailstock centre when turning between centres. They have a point angle of 60° to match the angle of a Tailstock Centre

Upcut Bits provide faster cutting while they pull chips up and out of the work or towards the router. They are excellent bits to use when cutting material in a table mounted router. They hold the work piece to the router. Ideal for mortise and tenon, grooving, slotting or routing deep blind holes.