This accessory makes it possible to drill holes even in confined spaces. Design with steel gears, 3 different bearing types and integrated gear support Projection only 102 mm, with a length of 183 mm The attachment is driven by an 8 mm hexagonal shank Quick-action drill chuck with clamping capacity from 0.8 to 10 mm Ergonomic housing design with pronounced finger recesses, additional handle that can be mounted on the left or right as required Maximum permissible torque: 70.6 Nm Material: reinforced ABS

These angled power screwdriver/drill tools are heaven sent for getting into tight corners. Because of the angle, they cannot however rival the precision you can obtain with normal drills and screwdrivers. When drilling, for instance, one often ends up with a lightly egg-shaped hole, which need not be a problem unless you are working to very high tolerances.

This angle drill/drive attachment is simply mounted in the chuck of your power drill or inserted in the 6.35 mm (1/4 inch) bit holder of your cordless drill. The bits are held by a magnet. For extra stabilisation use the included auxiliary handle that screws into the tapped holes either side of the housing. The auxiliary handle is hollow for storing bits and is closed with a rubber cap. The working height with the supplied 15 mm long bit is just 38 mm. The product package includes four PH2 bits.

This attachment can be used to increase the versatility of a cordless screwdriver or drill. To gain access to hard-to-reach and narrow places, the drive is deflected by 90°. The improved version scores with the following equipment details: New, improved gears with integrated gear support for longer service life and durability Ergonomic design with finger recesses on the front for better control when drilling and screwing Projection without bit only 38 mm, with a length of 182 mm The hexagonal shank with a standard size of 6.35 mm (¼") fits into standard drill chucks or bit holders the attachment itself accepts 1/4 inch hexagon accessories and holds them with a built-in magnet Included in the scope of delivery: Phillips cross-recess bit Material: ABS handle and metal gear head housing Torque: Tested with impact wrenches with a torque of up to 1500 in/lbs at 3000 rpm.