Has anyone else noticed this? I ordered a couple of each of the 11lb and they are both the same. The 13lb will return it to battery.

Hello: Does the guide rod use a bushing in the front of the slide? If so could it be binding on the guide rod? I have had better luck using a 13lb ISMI flat spring or a 12-14lb Wolff round wire spring in Glock 17's or 34's. I don't know whose spring the Glock Store is using. Make sure your striker spring balances things out. I would do some drills to see what spring works the best for you. Thanks, Eric

These fat springs seem very light compared to the "normal" size springs. The 11lb spring for the PTGR doesn't even come close to getting the slide back into battery.

Because of the external dimensions of the Glock Marksman Barrel (the Gen5 barrel), it takes an OEM Recoil Spring Ass'y that it close to 1/3" longer than a Gen4.  A spring that is designed for the dimensions of a Gen2/3/4 RSA is going to sit loose in the Gen5 slide, exerting less pressure when the slide is closed.  Gen5's generally need one step stronger to act like a previous-Generation gun (use a 13# where you may have gotten away with an 11 in your Gen3).

These fat springs seem very light compared to the "normal" size springs. The 11lb spring for the PTGR doesn't even come close to getting the slide back into battery.

10000+ "mini milwaukee packout box" printable 3D Models. Every Day new 3D Models from all over the World. Click to find the best Results for mini milwaukee ...

Has anyone else noticed this? I ordered a couple of each of the 11lb and they are both the same. The 13lb will return it to battery.

Ideal coatingscareers

Noticed the same thing, even the 13 is too weak to be reliable in gen5 with 4.5lb striker spring.  Try a 15, if that doesn’t work then dump it and get a Jentra.

Feb 12, 2011 — "Drill Rod" is Air, Water, or Oil Hardening tool steel and will need to be hardened and tempered. Still it will not be as good as HSS as a cutting tool.

IMHO, this is the closest guess to why this is happening.  Not that the OP actually has a 19 spring, but he does have a SHORT spring.

Ideal coatingslocations

May 18, 2024 — Silver Tungsten Zinc. Graphite Sterling Silver Peek Plastics Polyethylene PVDF. Equipment. Machinery. CNC Turning Lathes Tool Room Lathes Swiss ...

PS, if you want to buy a knowingly bad TGR for a 34/35 length slide, with no returns and no complaints allowed, send me a PM.

Band Saw Blades · Band Saw Accessories · Industrial Circular Saw Blades. Power Tool Accessories. All PTA Products · Hole Cutting & Boring · Precision Hole ...

2 Flute Straight Cut Router Bit 1/4″ Shank or 1/2″ Shank (select one) ... The 2 Flute Straight Cut Router Bit is a precision tool designed to make cutting and ...

Ideal coatingsreviews

I had the experience Eric suggests with a G34/35 length TGR - I don't remember if it was Glock Store or not.  It was a Gen3 type with an adaptor for the Gen4 slide.  My once reliable G35 was turned into an unreliable piece of garbage due to that setup.  Putting the old Jager steel rod back in completely resolved the issue.

Established in the year 2014, G Tech Diamond Tools in Sathy Road, Erode is a top player in the category Diamond Tool Dealers in the Erode. This well-known ...

.062 (1/16) .005 .312, (5x), 4 ...

Table Feed (Vf) · fz (mm/tooth): Feed per tooth · z: Number of teeth · n (min-1): Spindle speed (Feed rate fr = zxfz).

3/4" X 3/4" HSS 4 Flute Single End Long End Mill, Qualtech. Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and ...

R Komanduri · 1997 · 187 — This was followed by significant advancements in tool materials and tooling design. With the development of new and more challenging metal-matrix and ceramic- ...