Our Supporting Artisans who helped curate the products on this site will share commissions for purchases made through links in this post.

Npt threadsizes

NPT fittings are slightly tapered so the “nominal” diameter is the diameter in the middle of the threaded portion, as measured by the top (crest) of the threads. This is a bit confusing, but NPT threads are made to the ANSI B1.20.1, SAE AS71051 standard and anything complying with a standard with a name like that is bound to be bewildering. Hopefully the image below will help.

Restek’s Technical Service team gets quite a few questions from customers about fittings. There is a bewildering assortment of fitting types and sizes on the Restek web site. A blog post titled, “I need a fitting, but which one?” is where we often direct customers for help with these questions. One of the things discussed in that blog post is National Pipe Thread tapered (NPT) fittings as one of the main types used, but many people have difficulty identifying the correct size NPT fitting for their needs. The confusion comes from the fact that the outside diameter (OD) of an NPT fitting does not match the “name” of the fitting. For an example let’s look at Restek catalog # 23187 shown below, which is a 1/4" to 1/8" NPT Male Connector.

Npt threadchart

The charts below are from the Swagelok Thread and End Connection Identification Guide with the first chart showing dimensions for male NPT threads and the second chart containing the dimensions for female NPT threads.

The 1/4" designation in the name refers to the compression fitting side of the fitting (on the left in the picture above) which has a nut and ferrules to accept and connect to 1/4" OD tubing. Makes sense, right? However, the threads on the right side of the fitting in the picture above are called 1/8" Male NPT, but if you measure the OD of the 1/8” NPT side you will find it is about 0.4" in diameter…certainly not very close to 1/8" (0.125”). As a general “rule of thumb” an NPT thread is approximately 1/4" (0.25”) larger than its “name.” For a 1/4" NPT fitting the “nominal” OD is 0.533”.

Details: Product Description: This lightweight and compact pneumatic chamfering machine is designed for metal workers, DIY enthusiasts, and manufacturers. Features: 10 R-Type Blades and 10 C-Type Blades: Includes 2 pre-installed C-type blades for immediate use - 0.1-0.5mm right-angle chamfering and 1.5mm round-edge chamfering Powerful Performance: 1/4" air inlet - operates at 30,000 RPM using compressed air for efficient chamfering User-Friendly Design: Ergonomically designed for single-handed operation, ideal for tight spaces Safety Features: Equipped with a pressure plate safety switch, alloy steel baffle, and belt clip for secure handling Adjustable Speed: 4-speed settings to control the chamfering speed for various applications Depth adjustable: 0.1-0.9mm Product Includes: Pneumatic chamfering machine (yellow) x1 Screwdrivers x2 Wrench x1 Bearings x4 Screws x6 (2 Phillips, 3 Allen, 1 Hex) R-type blades x10 C-type blades x10 (2 pre-installed) User manual x1 Packaging Dimensions: 15.5 x 10 x 5 cm Net Weight: 400g Total Weight: 510g Important Notes: Wear Personal Protective Equipment: Safety goggles and ear protection are recommended Maintain a Safe Work Environment: Keep the workspace clean and well-lit Select Compatible Accessories: Ensure all components are appropriate for operation Regular Maintenance: Check mechanical and pneumatic parts regularly for cleanliness and lubrication