Mark HughesOwner, Hughes ToolingDid you find this post helpful? Feel free to Like this post.Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

The Harvey County Health Department and community partners and residents determined the top health issues through the Community Health Needs Assessment in 2023, and from that, created the Harvey County Community Health Improvement Plan. The CHIP provides guidance and focus to improve the health issues from 2023 into 2026. The CHIP can be viewed by clicking here.

You can create the path in Surface mode by creating two sketches.  One on the XY plane which will contain one line equal to the radius of the workpiece.  One on the XZ plane which will contain one line equal to the height of the workpiece (threads).

this new UI on fusion has me lost. last night it was great. today i got an upate and everything is in a different place.

new customer i am just trying to get stsrted actually making a little money doing this and they are adamant i cant post any pictures or anything anyplace.

Mark HughesOwner, Hughes ToolingDid you find this post helpful? Feel free to Like this post.Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

The Health Department and other local health partners teamed up for a panel discussion to talk about preventing prescription and opioid misuse in our communities. You can see the video from the panel below.

i am lost as how to model this, as the biggest acme thread i can find goes to 5 inch. i can model the profile of the thread, but just cant get how to wrap it around the part,

Attached is a template for creating custom threads. You'll need to edit the thread form sketch, this will cause errors but they are easy to fix. The diameters and pitch are set in the properties manager, you might find editing the parameters is easier with the timeline rolled back.

Using the Sweep command, set the profile to the first sketch line and the path to the second sketch line.  Set the Taper Angle to the number of degrees for the path.

If it's square you might be able to get away with a Coil. Coil has a square option but the profile is parallel to the axis not perpendicular with the helix. This means the height is squashed a bit but on a big diameter with a shallow helix you probably will not notice.

modeling the threads is the last part thankfully. i left it until tonight. but i have until thursday deadline so i hope i can make sense out of doing it manually