Commonly referred to as just JIC fittings these metal to metal sealing type fittings have a 37° flare (sealing surface angle) and straight United National Fine straight Threads (UNF). The original design specification for the fittings comes from the Society of Automotive Engineers (SAE) and these fittings are the most common American fitting type in Europe. Standard: ISO 12151-5, ISO8434-2 and SAE J516

Demo programs have a limited functionality for free, but charge for an advanced set of features or for the removal of advertisements from the program's interfaces. In some cases, all the functionality is disabled until the license is purchased. Demos are usually not time-limited (like Trial software) but the functionality is limited.

The male has a 24° sealing angle cone seat with straight metric threads. The female has a 24° convex cone with O-ring and a swivel straight metric threaded nut. Standard: ISO 12151-2 / ISO 8434-1 & ISO 8434-4

This file has been scanned with VirusTotal using more than 70 different antivirus software products and no threats have been detected. It's very likely that this software is clean and safe for use.

Freeware programs can be downloaded used free of charge and without any time limitations. Freeware products can be used free of charge for both personal and professional (commercial use).

The most commonly found sizes on hydraulic hose are below: 1/4" hose - 9/16" ORFS 3/8" hose - 11/16" ORFS 1/2" hose - 13/16" & 1" ORFS 3/4" hose - 1.3/16" ORFS 1" hose - 1.7/16" ORFS

The most commonly found sizes on hydraulic hose are below: 1/4" hose - 9/16" JIC 3/8" hose - 9/16" JIC / 3/4" JIC 1/2" hose - 7/8" JIC 3/4" hose - 1.1/16" JIC 1" hose - 1.5/16" JIC

The 4-bolt split flange (or full flange) fitting is used worldwide for connecting high pressure hoses typically to pumps, motors and cylinders, where the hose assemblies are subjected to large pressure loadings. The sealing mechanism is through compression of the O-ring in the face of the flange head against the surface of the port/ connection. The flange fittings are generally separated into two pressure classes referred to as 3000 psi (SFL) or 6000 psi (SFS). ISO 12151-3 refers to the flange fittings as code 61 for the 3000 psi and code 62 for the 6000 psi. In addition to these flanges, customer specific Komatsu® and CATERPILLAR® flanges can also be found in the market.

The most commonly found sizes on hydraulic hose are below: 1/4" hose - 10L Metric 3/8" hose - 12L Metric 1/2" hose - 15L Metric 3/4" hose - 22L Metric 1" hose - 28L Metric

Adobe, Apowersoft, Ashampoo, Autodesk, Avast, Corel, Cyberlink, Google, iMyFone, iTop, Movavi, PassFab, Passper, Stardock, Tenorshare, Wargaming, Wondershare

The 4-bolt split flange (or full flange) fitting is used worldwide for connecting high pressure hoses typically to pumps, motors and cylinders, where the hose assemblies are subjected to large pressure loadings. The sealing mechanism is through compression of the O-ring in the face of the flange head against the surface of the port/ connection. The flange fittings are generally separated into two pressure classes referred to as 3000 psi (SFL) or 6000 psi (SFS). ISO 12151-3 refers to the flange fittings as code 61 for the 3000 psi and code 62 for the 6000 psi. In addition to these flanges, customer specific Komatsu® and CATERPILLAR® flanges can also be found in the market.

This software is no longer available for the download. This could be due to the program being discontinued, having a security issue or for other reasons.

ORFS fittings are becoming the most popular international fitting type used on global OEM machines due to their high level of sealing and their good vibration resistance. The fittings use the O-ring compression mechanism to seal. The female fittings have flat faces and straight threaded UNF swivel nuts. The male fittings have the O-ring in a groove in the flat face. Seen as a major advantage, these fittings offer the possibility to build the hose assemblies into fixed distances/spaces, without having to move back other system components due the flat faces of the male and female fittings - the hose assembly can be slotted in. StandardISO 12151-1, ISO8434-3 and SAE J516

Trial software allows the user to evaluate the software for a limited amount of time. After that trial period (usually 15 to 90 days) the user can decide whether to buy the software or not. Even though, most trial software products are only time-limited some also have feature limitations.

There are some reports that this software is potentially malicious or may install other unwanted bundled software. These could be false positives and our users are advised to be careful while installing this software.

Thread Identification guide to common threads including BSP, JIC, ORFS, Metric, Flanges and more from Apex Fluid Power. Simply click the links below to be taken direct to the thread identification for that type. We can also provide a PDF/hard copy for easy reference in the field. Please contact us and we will get this to you ASAP. Or simply phone us on 01228 511157 and let us help you with sizing the correct thread.

Also referred to as Whitworth threads, the BSP thread type fittings seal using metal to metal angled surfaces or a combination of metal to metal and an O-ring. The angle of the sealing surfaces is 60° for both forms. There are two popular thread forms, British Standard Pipe Parallel (BSPP) and British Standard Pipe Tapered (BSPT). Identification is made by measuring the outside diameter of the thread and the number of threads per inch (25.4 mm)

Each software is released under license type that can be found on program pages as well as on search or category pages. Here are the most common license types:

Open Source software is software with source code that anyone can inspect, modify or enhance. Programs released under this license can be used at no cost for both personal and commercial purposes. There are many different open source licenses but they all must comply with the Open Source Definition - in brief: the software can be freely used, modified and shared.

This license is commonly used for video games and it allows users to download and play the game for free. Basically, a product is offered Free to Play (Freemium) and the user can decide if he wants to pay the money (Premium) for additional features, services, virtual or physical goods that expand the functionality of the game. In some cases, ads may be show to the users.

To make sure your data and your privacy are safe, we at FileHorse check all software installation files each time a new one is uploaded to our servers or linked to remote server. Based on the checks we perform the software is categorized as follows: