Thank you for your video.  It's hard for me to follow but I think there's some practical info hiding within it.  Practical meaning it might be something I could comprehend but it's a bit of a language challenge.

I found an older article about creating a form tool and how to program a simple back chamfer but it's not working.  It's not entirely clear to me if you're to use the 2d chamfer or 2d contour options.  I have my form tool set up but can't figure out what to do next.  Can someone help?  This is the article I found:

I usually use 2D contour for this. Please see the attached file as an example. If you check the expressions in stock-to-leave, you will see the formulas that are shown in the article.

Find the end portal. Once you make the Eye of Ender or all twelve, you'll need to throw them into the air. They will travel towards the portal. Once you can ...

Ah, actually no.  I made a form tool.  I tried something beforehand and it didn't work so thought I needed a special tool.  Let me try it again.

Bestbackside chamfer tool

Ah, actually no.  I made a form tool.  I tried something beforehand and it didn't work so thought I needed a special tool.  Let me try it again.

Mar 20, 2003 — I'm looking at a through pocket, .35 x 1.25 x 4 inches deep. Aluminum. .125 radii in the corners. At some point I see myself using a ¼ x 2 ...

Mar 20, 2013 — I want to do is make a set number of evenly spaced, vertical cuts, across a triangle face. I have tried removing the face (leaving the edges around it) and ...

Up Cut vs straight cut, 1 flute vs 2 flute. Hi all, just wondering if it matters what sort of ...

Hi Seth,Can you confirm the radial offset formula is correct?  It makes no sense to me when I look at it and it's not working.

The 'Build Your Own' specification form is below. Please add your specific dimensions and quantities, then print out the form and return it to us.

That's because the file was saved in a Developer build of Fusion. Since it's "from the future", it can't be opened in Production. Tsk Tsk..

Thanks, Seth.  I can't figure out why I don't have the option to set a chamfer width in 2d contour.  A recent update seems to have removed that ability for me.

Be aware, this is prone to colliding with the model, so ensure you check carefully and simulate prior to running on a machine

IndexableChamfer tool

So, how do you enter those? Go down to "Stock To Leave", turn it on and then click on the three-dot icon to the right. Select "Edit User Expression". This opens a new dialog box, so just copy/paste those values

Our roll forming tungsten carbide rolls are built to stand the test of time. Roll-Kraft's dedicated Tungsten Carbide Facility ensures the same high quality.

Be aware, this is prone to colliding with the model, so ensure you check carefully and simulate prior to running on a machine

Get the 3/4" Carbide Round Quad Router Bit at your local Home Hardware store. View online and pick-up in store.

Thank you for your video.  It's hard for me to follow but I think there's some practical info hiding within it.  Practical meaning it might be something I could comprehend but it's a bit of a language challenge.

45 degree BackChamfer tool

Check out our new line of End mills, email info@internaltool.com for Details. This Featured tool is from our series 126 High Performance Aluminum Cutting Endmills. These are designed for roughing and finishing Aluminum Alloy material, they feature 3 Flutes, 45 Degree Helix, Variable Pitch, Full Eccentric Relief, and Zirconium coating.

Insertchamfer tool

Hi Seth,Can you confirm the radial offset formula is correct?  It makes no sense to me when I look at it and it's not working.

I usually use 2D contour for this. Please see the attached file as an example. If you check the expressions in stock-to-leave, you will see the formulas that are shown in the article.

May 7 - Now announcing UPS 2nd day air for one flat rate of $14.00. Some restrictions apply. Contact sales@internaltool.com for more details.

Front and backchamfer tool

Goodness...I have no idea what all that means!  The radial formula says invalid expression when I try to use it.  The axial formula was okay.  When using this in 2d contour, how would you adjust the chamfer width?  I'm assuming you use 2d contour?

BacksideCountersinktool

May 7 - Now announcing UPS 2nd day air for one flat rate of $14.00. Some restrictions apply. Contact sales@internaltool.com for more details.

*Options ... Your choice of 2 or 4-flute end mills. Make your selection in the Options dropdown menu above. End mill sizes include: 1/8″, 1/4″, 3/8″. At Sherline, ...

Thank you but I'm having trouble opening the file.  I needed to update Fusion and restart but it still won't open.  I've attached a log file.

-((tool_diameter-tool_tipDiameter)/2*Math.tan((90-tool_taperAngle) * Math.PI/180))+(chamferWidth*Math.tan((90-tool_taperAngle) * Math.PI/180))

Thanks, Seth.  I can't figure out why I don't have the option to set a chamfer width in 2d contour.  A recent update seems to have removed that ability for me.

I found an older article about creating a form tool and how to program a simple back chamfer but it's not working.  It's not entirely clear to me if you're to use the 2d chamfer or 2d contour options.  I have my form tool set up but can't figure out what to do next.  Can someone help?  This is the article I found:

Thanks, Seth.  I can't figure out why I don't have the option to set a chamfer width in 2d contour.  A recent update seems to have removed that ability for me.

MillChamfer Tool

Backside chamfer toolfor sale

-((tool_diameter-tool_tipDiameter)/2*Math.tan((90-tool_taperAngle) * Math.PI/180))+(chamferWidth*Math.tan((90-tool_taperAngle) * Math.PI/180))

Goodness...I have no idea what all that means!  The radial formula says invalid expression when I try to use it.  The axial formula was okay.  When using this in 2d contour, how would you adjust the chamfer width?  I'm assuming you use 2d contour?

So, how do you enter those? Go down to "Stock To Leave", turn it on and then click on the three-dot icon to the right. Select "Edit User Expression". This opens a new dialog box, so just copy/paste those values

Thank you but I'm having trouble opening the file.  I needed to update Fusion and restart but it still won't open.  I've attached a log file.

Steel sheet hardening and strengthening processes do not involve heating to the steel's Curie/A2 temperature and quenching.

10 Series Standard Boring bar now available with corner radius, AlTiN coating, and Tin Coating. Made from Solid Micro-grain Carbide, Tapered Neck and fillet radius provides maximum rigidity, All shanks have a lockdown flat for faster setups. These are made for boring all types of materials!

-((tool_diameter-tool_tipDiameter)/2*Math.tan((90-tool_taperAngle) * Math.PI/180))+(chamferWidth*Math.tan((90-tool_taperAngle) * Math.PI/180))

Thanks, Seth.  I can't figure out why I don't have the option to set a chamfer width in 2d contour.  A recent update seems to have removed that ability for me.

The tool will provide several engineering specifications such as the moment of inertia and yield strength to determine the deflection.

Feb 14, 2022 — Plunge Milling. Automag used the same 5 flute tool to plunge mill the sides of the part without coolant at 1308 SFM and 1040 IPM with a 47% ...

That's because the file was saved in a Developer build of Fusion. Since it's "from the future", it can't be opened in Production. Tsk Tsk..

-((tool_diameter-tool_tipDiameter)/2*Math.tan((90-tool_taperAngle) * Math.PI/180))+(chamferWidth*Math.tan((90-tool_taperAngle) * Math.PI/180))