SNMG120408 PS CA525 Medium machining of steel. Good general use insert suitable for intermittent cutting. Excellent chip control at relatively low feed rates. Cutting parameters Depth of cut 1.00~3.5mm Feed 0.18~0.35 mm/rev Grade...

1.6mm Parting insert TKN1.6 Suitable for steel and stainless Easy cutting with good chip control. 1.6mm inserts are ideal for smaller low powered machines, or where a thinner cut is required Use with blades. PARTING BLADE 1mm x 26mm PARTING BLADE 1mm...

Medium machining of stainless steel.    Kyocera Japan TNMG160404 MS CA6525 Suits all brands of  turning tools. (ISO) Medium machining of stainless steel. Also good for steel. Good general use insert suitable for light intermittent...

Medium to rough machining of stainless steel and steel    Kyocera Japan TNMG160412 PS CA525 (1.2mm Corner radius) Suits all brands of  turning tools. (ISO) Strong 1.2mm corner radius. Use for removing bulk material with...

10 tpi UN INTERNAL THREADING INSERT. Suitable for Sandvik style tools. Sharp ground cutting edges. Suitable for manual and CNC machines. Full profile inserts produce a superior thread quality straight off the tool with no finishing with files dies...

VNMG160404 CA6525 Medium machining of steel and stainless.    Kyocera Japan. VNMG160404  (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Good general use insert suitable for medium machining. Cutting...

Ceramic insert for hardened steel and cast iron.   Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can...

16 tpi UN INTERNAL THREADING INSERT. Suitable for Sandvik style tools. Sharp ground cutting edges. Suitable for manual and CNC machines. Full profile inserts produce a superior thread quality straight off the tool with no finishing with files dies...

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. Spiral-flute drill bits evacuate chips as the bits drill into a workpiece.

DNMG150608 PS CA6525 This is the thicker style insert. Please check your holder. Medium machining of steel and stainless steel. Good general use insert suitable for light intermittent cutting. Excellent chip control at relatively low feed rates...

60º EXTERNAL THREADING INSERT. Partial profile insert covers 3.5~5mm 5~7 TPI Standard insert fits most brands. Suitable for manual and CNC machines. Suits Tools Echain 25mm Shank Kyocera 25mm Shank

Medium machining of steel.    Kyocera Japan. TNMG160404 GS (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Good general use insert with strong edge suitable for medium machining of steel at moderate feeds. Excellent...

CNGA120408-T02025 PT600MCeramic insert for hardened steel and high speed machining of cast iron.Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent...

SNMG120408 CA6525 Heavy machining of steel and stainless steel. Good general use insert suitable for intermittent cutting. Conventional chip breaker ideal for chamfering. Cutting parameters Depth of cut 1.00~3.5mm Feed 0.20~0.40 mm/rev Grade...

Heavy interrupted machining of cast iron. Also useful for other hard materials.  Kyocera Japan. TNMG160408 ZS CA4515 (0.8mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Cutting parameters Depth of cut 1.0~4.50mmFeed 0.20~0.45...

SCMT09T304 HQ   0.4 mm corner radius Fine to medium machining. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.08~0.20...

Light to medium machining of stainless and steel.    Kyocera Japan TNMG160404 MQ CA6525 (0.4mm CORNER RADIUS) Suits all brands of  turning tools...

12 tpi UN INTERNAL THREADING INSERT. Suitable for Sandvik style tools. Sharp ground cutting edges. Suitable for manual and CNC machines. Full profile inserts produce a superior thread quality straight off the tool with no finishing with files dies...

Roughing aluminium and other soft materials.   Kyocera Japan. TNMG160404 AH (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) High rake AH chip breaker for aluminium roughing.Suits turning tools including those below Suits...

Machining of aluminium and plastic.    Kyocera Japan. TNGG160404L-A3 KW10 (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) High rake sharp ground  breaker for aluminium plastics and non ferrous. This is a handed...

Medium machining of stainless and steel.    Kyocera Japan TNMG160408 TK CA6525 (0.8mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Good general use insert with positive rake and sharp edge for low cutting force. Excellent...

TPMR160308 CA4515 The ever popular boring and turning insert. Suitable for all general applications. Positive rake offers low cutting resistance when boring  but also able to withstand large depth of cut. CA4515 General machining of cast iron...

Heavy interrupted machining of cast iron. Also useful for hard materials.     Kyocera Japan. CNMG120408 ZS CA4515 Strong edge suitable for heavy cutting at high feeds and speeds. Not recommended for light machines or girls. Cutting...

One of our most popular inserts for general use. Medium machining of steel.     Kyocera Japan TNMG160408 PS CA6525 (0.8mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Good general use insert suitable for intermittent...

TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces...

Medium machining of steel and stainless steel.    Kyocera Japan. CNMG120404 PS CA6525 (0.4mm CORNER RADIUS) Good general use insert suitable for light intermittent cutting. Excellent chip control at relatively low feed rates. Recommended...

SCGT09T304-AL   0.4mm corner radius Suitable for aluminium, plastic and other soft materials. Suits tools below. SSSCR1212K09 SSSCR1616K09 SSSCR2020K09 SSSCR2525K09

Heavy interrupted machining of cast iron. Also useful for hard materials like induction hardened chrome bar.     Kyocera Japan. SNMG120408 ZS CA4515 Strong edge suitable for heavy cutting at high feeds and speeds. Not recommended for...

VNMG160408 CA6525 Medium machining of steel and stainless.    Kyocera Japan. VNMG160408  (0.8mm CORNER RADIUS) Suits all brands of  turning tools. Good general use insert suitable for medium to rough machining. Cutting...

8 tpi UN INTERNAL THREADING INSERT. Suitable for Sandvik style tools. Sharp ground cutting edges. Suitable for manual and CNC machines. Full profile inserts produce a superior thread quality straight off the tool with no finishing with files dies...

Fine to medium machining of steel.    Kyocera Japan TNMG160408 HQ (0.8mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light...

All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.

Medium machining of stainless and steel.    Kyocera Japan TNMG160404 TK CA6525 (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Good general use insert with positive rake and sharp edge for low cutting force. Excellent...

TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened...

Heavy interrupted machining of cast iron. Also useful for other hard materials.  TNMG160412 ZS CA4515 (1.2mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Cutting parameters Depth of cut 1.0~4.50mmFeed 0.22~0.5 mm/rev Suits turning...

Medium machining of steel at high surface speed.    Kyocera Japan. TNMG160408 GS (0.8mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Good general use insert suitable for medium machining of steel at moderate feeds...

14 tpi UN INTERNAL THREADING INSERT. Suitable for Sandvik style tools. Sharp ground cutting edges. Suitable for manual and CNC machines. Full profile inserts produce a superior thread quality straight off the tool with no finishing with files dies...

SNMG120408 CA525 Heavy machining of steel. Good general use insert suitable for intermittent cutting. Conventional chip breaker ideal for chamfering. Cutting parameters Depth of cut 1.00~3.5mm Feed 0.20~0.40 mm/rev Grade...

Machining of aluminium and plastic. Kyocera Japan. TNGG160408R-A3 KW10 (0.8mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) High rake sharp ground  breaker for aluminium plastics and non ferrous. This is a right insert. R for...

TPMR090204G TN60 Cermet The ever popular boring and turning insert.  Positive rake offers low cutting resistance. 12mm TPMR Boring bar

TPUR160304L YD101 Left hand insert. 0.4mm radius. Left hand insert suitable for boring bars. Sharp ground insert for aluminium and plastics. Fits same tools and boring bars as TPMR160304 S25X-CTUPR16-34 S32S-CTUPR16-43 S40X-CTUPR16-50

TNGG160402R-S (0.2mm Corner radius) "R" For standard external tuning. Precision ground sharp edge insert for low cutting force and good chip control.Intended as a finishing insert but found to be popular for many materials and applications such as...

TNGG160402L-S (0.2mm Corner radius) "L" For left hand external tuning and boring. Precision ground sharp edge insert for low cutting force and good chip control.Intended as a finishing insert but found to be popular for many materials and applications...

TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened...

Fine to medium machining of steel.    Kyocera Japan TNMG160404 HQ CA525 (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light...

SCMT09T308 HQ   0.8 mm corner radius Fine to medium machining. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.08~0.20...

TNMG160408 PMG CA125P (0.8mm CORNER RADIUS) Excellent chip control at various depths of cut from 0.5mm up to 5mm. Grade information CA125P General machining of steel. 1040 4140 4340 etc. Cutting parameters  Depth of cut 0.5~5.0mmFeed .15~.50...