When to Opt for a High-Performance End Mill - 2 flute vs 4 flute end mill

2024-08-19 13:22:28

{"Chamfer Length - Inch":["0.01875","0.03125","0.023437","0.039062","0.026785","0.044642","0.052083","0.0375","0.0625","0.046875","0.078125","0.104166","0.075","0.125","0.053571","0.089285","0.083333","0.138888","0.09375","0.15625"],"Number of Flutes":"-","Major Diameter - Inch":["0.06","0.073","0.086","0.099","0.112","0.125","0.138","0.164","0.19","0.216","0.25","0.3125","0.375"],"Tap Drill Size Max - Inch":["0.0549","0.066625","0.078714","0.0905","0.1018","0.1148","0.12525","0.15125","0.173","0.17725","0.199","0.2296","0.235429","0.289833","0.2955","0.3495","0.358"],"Neck Length - Inch (L1)":["0.356692","0.413385","0.476377","0.535433","0.559055","0.625984","0.685039","0.751968","0.866141","0.93307","0.996062","1.125984","1.251968"],"Threads Per Inch":["80","64","56","48","40","32","24","20","28","18","16"],"Tap Drill Size Min - Inch":["0.053625","0.065031","0.076893","0.088375","0.09925","0.11225","0.122063","0.148063","0.16875","0.174063","0.19475","0.2245","0.231786","0.284167","0.29125","0.343125","0.35375"],"Square Length - Inch (Ik)":["0.1875","0.25","0.28125","0.3125","0.375","0.4375"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.22","0.255","0.318","0.381"],"Overall Length - Inch (L)":["1.625","1.688","1.75","1.813","1.875","1.938","2","2.125","2.375","2.5","2.719","2.938"],"Thread Length - Inch (Lc)":["0.317322","0.374015","0.437007","0.496062","0.295275","0.299212","0.370078","0.492125","0.594488","0.665354","0.751968"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.165","0.191","0.238","0.286"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Chamfer Type":["Bottom (1.5P)","Modified Bottom (2.5P)"],"Brand":"EXOTAP","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"15-30","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"10-15","Hardened Steels : 35 HRC":"H; Good","Cutting Speed (SFM) - Die Steels":"15-20","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-130","Cutting Speed (SFM) - Aluminum : Casting":"65-130","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Cutting Speed (SFM) - High Carbon Steel : 1065":"15-30","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Stainless Steels : 300":"15-50","Cutting Speed (SFM) - Stainless Steels : 400":"15-50","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Web Literature 1":["8002024CA-TP,65","8002024CA-TP,66","8002024CA-TP,67"],"Units":"Inch","High Carbon Steel : 1065":"P; Best","List Name":"VP-NRT","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","STI Thread":"No","Product Overview":"CPM, V-coating","Stainless Steels : 300":"M; Best","Meets 2B Class of Fit":["Yes","No"],"Low Carbon Steel : 1010; 1018":"P; Best","Thread Size - Number":["No. 0","No. 1","No. 2","No. 3","No. 4","No. 5","No. 6","No. 8","No. 10","No. 12"],"Stainless Steels : 400":"M; Best","Thread Limit":["H2","H3","h4","H5","h6","H7","h8","H9"],"Medium Carbon Steel : 1035; 1045":"P; Best","Meets 3B Class of Fit":["Yes","No"],"Stainless Steels : 17-4PH":"M; Good","Short Description":"Premium Powder Metal High Speed Steel","Thread Type":["UNF","UNC"],"Surface Treatment":"V","Substrate":"VC-10","Thread Size - Inch":["1/4","5/16","3/8"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.356692\" - 1.251968\"","Taper-Sizes":"-","Overall-Sizes":"1.625\" - 2.938\"","Shank-Sizes":"0.141\" - 0.381\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014050/Taps_-_Tap_-_EXOTAP_NRT_-_List_14050_-_Forming_Taps_-_Catalog"],"Friendly Name":"14050"}

Straight Flute End Mills,Cutting Tools.

{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985"],"Chamfer Length - Inch":["0.044291","0.062007","0.070866","0.088582","0.110728","0.132874","0.155019"],"Major Diameter - Metric":["3","4","5","6","8","10","12"],"Overall Length - Metric (L)":["50","55","62","65","75","82","85"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218"],"Tap Drill Size Max - Metric":["2.796","3.714","4.674","5.592","7.49","9.388","11.286"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["16","19.1","22.2","25.4","28.6","31.8","49.1"],"Tap Drill Size Min - Metric":["2.745","3.643","4.592","5.49","7.363","9.235","11.108"],"Square Length - Metric (Ik)":["4.7625","6.35","7.3","8.7","10.1","11.1125"],"Thread Length - Metric (Lc)":["6","8.4","9.6","12","15","18","21"],"View Catalog Page":"Here","Coolant Thru":"No","Class of Fit":"6H","Chamfer Type":"Bottom (2.25P)","Benefit 1":"Eliminates the need to choose the correct thread limit","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Brand":"HY-PRO TAP","Cutting Speed (SFM) - Aluminum : 6061; 7075":"45-100","Cutting Speed (SFM) - Aluminum : Casting":"45-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-100","Cutting Direction":"RH","Feature 1":"6H Class of Fit","Product Category":"Forming","Meets 4H Class of Fit":"No","Full Description":"Semi-premium taps made from premium high speed steel for general purpose tapping applications.","Medium Carbon Steel : 1035; 1045":"P; Good","Interrupted Thread":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","List Name":"NRT","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,91","Meets 3B Class of Fit":"No","Web Literature 4":"800389CA","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","Product Overview":"6H, HSS","Thread Type":["M","MF"],"Surface Treatment":["BRIGHT","TiN","TiCN"],"STI Thread":"No","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"General Purpose Class of Fit Taps","Substrate":"HSS","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"16mm - 49.1mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 85mm","Shank-Sizes":"3.5814mm - 9.6774mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20286/Taps_-_Tap_-_HY-PRO_SEVEN_-_List_286_-_Forming_Taps_-_Catalog"],"Friendly Name":"286"}

{"Number of Flutes":"-","Chamfer Length - Inch":["0.147637","0.098425","0.123031","0.172244","0.19685","0.246062","0.034448","0.049212","0.059055","0.068897","0.073818","0.07874"],"Major Diameter - Metric":["10","12","14","16","18","20","3","3.5","4","4.5","5","6","7","8"],"Square Width - Metric (k)":["7.2644","6.985","8.1788","9.144","10.3124","12.4206","2.794","3.3274","3.8608","4.8514","6.0452"],"Overall Length - Metric (L)":["120","150","180","220","80","90","100","110"],"Tap Drill Size Max - Metric":["9.388","9.592","9.49","11.592","11.388","11.49","11.286","13.388","13.184","15.388","15.184","17.388","16.98","19.388","18.98","2.857","2.796","3.255","3.796","3.714","4.194","4.796","4.674","5.694","5.592","6.592","7.694","7.592","7.49"],"Shank Diameter - Metric (d)":["9.6774","9.3218","10.8966","12.192","13.7668","16.5608","3.5814","4.2672","4.9276","6.477","8.0772"],"Pitch":["1.5","1","1.25","1.75","2","2.5","0.35","0.5","0.6","0.7","0.75","0.8"],"Neck Length - Metric (L1)":["39","35","49.1","51.1","54","55","61.8","18","20.3","21.1","25","30"],"Tap Drill Size Min - Metric":["9.235","9.49","9.363","11.49","11.235","11.363","11.108","13.235","12.98","15.235","14.98","17.235","16.725","19.235","18.725","2.822","2.745","3.194","3.745","3.643","4.118","4.745","4.592","5.618","5.49","6.49","7.618","7.49","7.363"],"Square Length - Metric (Ik)":["11.1125","12.7","14.2875","15.875","17.4625","4.7625","6.35","7.9375","9.525"],"Thread Length - Metric (Lc)":["15","17","20","25","6","7.2","8.5","9.1","9.6","10","12"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Chamfer Type":"Modified Bottom (2.5P)","Benefit 4":"Additional length provides greater reach capabilities.","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","Meets 4H Class of Fit":["No","Yes"],"List Name":"LT-S-XPF","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-25","Interrupted Thread":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Meets 2B Class of Fit":"No","Feature 1":"Fluteless Forming Tap","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,60","8002024CA-TP,61"],"Web Literature 4":"800389CA","Meets 3B Class of Fit":"No","Web Literature 2":"800222CA-V5","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Thread Type":["M","MF"],"Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Thread Limit":["D10","D8","D9","D11","D12","D5","D6","D7"],"Stainless Steels : 300":"M; Best","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Titanium : 6AL4V (30HRC)":"S; Good","Meets 6H Class of Fit":["Yes","No"],"Substrate":"HSS-CO","Thread Size - Metric":["M10","M12","M14","M16","M18","M20","M3","M3.5","M4","M4.5","M5","M6","m7","M8"],"Product Overview":"HSS-Co, Long Shank, V-Coating","Units":"Metric","Surface Treatment":"V","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"18mm - 61.8mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 220mm","Shank-Sizes":"3.5814mm - 16.5608mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016355/Taps_-_Tap_-_EXOPRO_XPF-LS_-_List_16355_-_Catalog"],"Friendly Name":"16355"}

Counterclockwise rotation ensures down-milling. Two-axis ramping – linear. How to apply rampingA demanding cutting process. There are three cutting processes ...

{"Number of Flutes":"-","Chamfer Length - Inch":["0.104166","0.078125","0.208333","0.125","0.192307","0.089285","0.3125","0.15625","0.25","0.138888","0.0625","0.056818","0.227272","0.178571","0.277777","0.069444"],"Major Diameter - Inch":["0.19","1","0.5","0.216","0.25","0.75","0.375","0.3125","0.625","0.125","0.138","0.4375","0.875","0.164","0.5625"],"Overall Length - Inch (L)":["3.937007","5.905511","7.086614","8.661417","4.724409","4.330708","3.149606"],"Tap Drill Size Max - Inch":["0.173","0.17725","0.966","0.4796","0.468615","0.199","0.201429","0.2296","0.235429","0.949","0.7245","0.7092","0.3495","0.358","0.289833","0.2955","0.602333","0.1148","0.115727","0.587909","0.12525","0.1278","0.408357","0.4171","0.829667","0.845857","0.15125","0.152666","0.5285","0.539833"],"Threads Per Inch":["24","32","12","20","13","28","8","16","10","18","40","44","11","14","9","36"],"Neck Length - Inch (L1)":["0.96496","0.960629","3.011811","1.93307","1.124015","1.120866","1.207086","2.43307","1.574803","1.377952","2.125984","0.721653","0.804724","0.801181","1.712598","2.653543","0.845669","0.841338","1.97244"],"Tap Drill Size Min - Inch":["0.16875","0.174063","0.9575","0.4745","0.460769","0.19475","0.197786","0.2245","0.231786","0.93625","0.718125","0.699","0.343125","0.35375","0.284167","0.29125","0.596667","0.11225","0.113409","0.578636","0.122063","0.12525","0.401071","0.412","0.818333","0.838571","0.148063","0.149833","0.52","0.534167"],"Square Length - Inch (Ik)":["0.25","0.8125","0.4375","0.28125","0.3125","0.6875","0.375","0.5625","0.1875","0.40625","0.75","0.5"],"Shank Diameter - Inch (d)":["0.194","0.8","0.367","0.22","0.255","0.59","0.381","0.318","0.48","0.141","0.323","0.697","0.168","0.429"],"Thread Length - Inch (Lc)":["0.520078","0.515748","1.251968","0.767716","0.521653","0.518503","0.525984","1","0.625984","0.555118","0.909448","0.312204","0.391338","0.387795","0.712598","1.110236","0.392913","0.388582","0.834645"],"Square Width - Inch (k)":["0.152","0.6","0.275","0.165","0.191","0.442","0.286","0.238","0.36","0.11","0.242","0.523","0.131","0.322"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":"Modified Bottom (2.5P)","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","Meets 4H Class of Fit":"No","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","List Name":"LT-S-XPF","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-25","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Feature 1":"Fluteless Forming Tap","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,58","8002024CA-TP,59"],"Web Literature 4":"800389CA","Meets 3B Class of Fit":["No","Yes"],"Web Literature 2":"800222CA-V5","Units":"Inch","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Stainless Steels : 300":"M; Best","Meets 2B Class of Fit":["Yes","No"],"Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Thread Size - Number":["No. 10","No. 12","No. 5","No. 6","No. 8"],"Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Thread Limit":["h6","h8","H7","H5"],"Titanium : 6AL4V (30HRC)":"S; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, Long Shank, V-Coating","Thread Type":["UNC","UNF"],"Surface Treatment":"V","Thread Size - Inch":["1","1/2","1/4","3/4","3/8","5/16","5/8","7/16","7/8","9/16"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.721653\" - 3.011811\"","Taper-Sizes":"-","Overall-Sizes":"3.149606\" - 8.661417\"","Shank-Sizes":"0.141\" - 0.8\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016255/Taps_-_Tap_-_EXOPRO_XPF-LS_-_List_16255_-_Catalog"],"Friendly Name":"16255"}

Feb 22, 2024 — Metric thread classes · For e position: e s = − ( 50 + 11 × P ) / 1000 \small{es = -(50 + 11 \times P) / 1000} es=−(50+11×P)/1000; · For f ...

{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.8608","4.8514","6.0452","7.2644","6.985","8.1788","10.3124","11.2268","13.2842","14.478","15.24","17.0688"],"Chamfer Length - Inch":["0.03937","0.044291","0.049212","0.068897","0.07874","0.098425","0.123031","0.147637","0.172244","0.19685","0.246062","0.295275"],"Major Diameter - Metric":["2","2.5","3","4","5","6","8","10","12","14","16","18","20","22","24"],"Overall Length - Metric (L)":["50","56","63","70","80","90","100","110","125","140","160"],"Shank Diameter - Metric (d)":["3.5814","4.9276","6.477","8.0772","9.6774","9.3218","10.8966","13.7668","14.986","17.7038","19.304","20.32","22.7584"],"Tap Drill Size Max - Metric":["2.35","2.888","3.428","4.591","5.672","6.831","9.025","11.233","13.431","15.631","17.631","19.999","21.999","23.999","26.376"],"Pitch":["0.4","0.45","0.5","0.7","0.8","1","1.25","1.5","1.75","2","2.5","3"],"Tap Drill Size Min - Metric":["2.317","2.851","3.387","4.539","5.608","6.761","8.946","11.145","13.333","15.519","17.519","19.868","21.868","23.868","26.228"],"Neck Length - Metric (L1)":["9.21","18.26","21.32","25.37","30.46","35","39","49.1","50.1","55","61.8","67.4","68.4","76.5","79.1"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125","12.7","15.875","17.4625","19.05","20.6375","22.225"],"Thread Length - Metric (Lc)":["8","6","7","10","11","12","15","17","20","25","30"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Chamfer Type":"Modified Bottom (2.5P)","Benefit 4":"Additional length provides greater reach capabilities.","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"12-25","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","List Name":"HL-S-XPF STI","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","Interrupted Thread":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Meets 2B Class of Fit":"No","Feature 1":"Fluteless Forming Tap","Web Literature 1":"8002024CA-TP,322","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 4":"800389CA","Meets 3B Class of Fit":"No","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Thread Type":"M STI","Stainless Steels : 17-4PH":"M; Best","Thread Limit":["D3","D4","D5","D6","D8","D9","D10","D11"],"Stainless Steels : 300":"M; Best","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Meets 4H Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Meets 6H Class of Fit":"Yes","Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, V-Coating, STI","Thread Size - Metric":["M2","M2.5","M3","M4","M5","M6","M8","M10","M12","M14","M16","M18","M20","M22","M24"],"Units":"Metric","Surface Treatment":"V","STI Thread":"Yes","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"9.21mm - 79.1mm","Taper-Sizes":"-","Overall-Sizes":"50mm - 160mm","Shank-Sizes":"3.5814mm - 22.7584mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016360/Taps_-_Tap_-_EXOPRO_XPF_-_List_16360_-_Screw_Thread_Insert_Taps_-_Catalog"],"Friendly Name":"16360"}

{"Number of Flutes":"-","Chamfer Length - Inch":["0.07874","0.098425","0.11811","0.137795"],"Overall Length - Metric (L)":["100","150"],"Square Width - Metric (k)":["4.5","5","5.5","6.5"],"Major Diameter - Metric":["6","8","10","12"],"Tap Drill Size Max - Metric":["5.592","7.49","9.388","9.49","11.286","11.388","11.49"],"Shank Diameter - Metric (d)":["6","6.2","7","8.5"],"Pitch":["1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["29"],"Tap Drill Size Min - Metric":["5.49","7.363","9.235","9.363","11.108","11.235","11.363"],"Square Length - Metric (Ik)":["7","8","9"],"Thread Length - Metric (Lc)":["19","22","24","29"],"View Catalog Page":"Here","Coolant Thru":"No","Benefit 3":"Provides High hardness with improved wear resistance and Increased production levels with longer tool life.","Chamfer Type":"Bottom (2P)","Brand":"EXOCARB","Aluminum : 6061; 7075":"N; Best","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Aluminum : Casting":"N; Best","Benefit 2":"Greater reach capability","Cutting Speed (SFM) - Aluminum : Casting":"50-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Feature 2":"Long Shank","Feature 1":"Micrograin carbide body","Cutting Direction":"RH","Product Category":"Forming","Interrupted Thread":"No","Full Description":"The EXOCARB Carbide Forming Taps are design to excel in Cast iron and Aluminum. TiAIN and TiCN coatings are available upon requests for an extended tool life.","Feature 3":"TiCN and TiALN coatings available upon requests","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,64","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","List Name":"OT-LT-NRT","Web Literature 4":"800389CA","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Substrate":"Carbide","STI Thread":"No","Product Overview":"Forming Tap, Long Shank, JIS","Thread Limit":["RH7","RH8"],"Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Short Description":"Tungsten Carbide Forming Taps","Thread Size - Metric":["M6","M8","M10","M12"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"29mm","Taper-Sizes":"-","Overall-Sizes":"100mm - 150mm","Shank-Sizes":"6mm - 8.5mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20357/Taps_-_Tap_-_EXOCARB_-_List_357_-_Forming_Taps_-_Catalog"],"Friendly Name":"357"}

Wiha Tools got their start making nuts and bolts in 1939 and have been making and innovating high quality precision German tools ever since. Wiha has honed their toolmaking craft over the decades and is widely recognized for their meticulous workmanship and near perfect fit that their tools achieve on the job. They believe in the quality of their tools so much, they are all backed by the “No Hassle Guarantee” which covers all defects in materials or workmanship. When you’re using a Wiha tool, you know it’s reliable. One of Wiha’s strongest points is their wide selection of tools that are packaged in combo packs, including deals on insulated tools – a great way to get a lot of tools for particular needs in a cheap way. Wiha’s the most popular brand you may never have heard of!

BLUE CHIP Machine, LLC, Waite Park, MN. 22 likes · 1 talking about this ... Some machining parts are small! May be an image of brass · Andy Johnson and ...

Drill Bit Decimal Equivalency Chart Vermont American discount, Inch and Metric Drill Bit Size ... Common Drill Bit Sizes discount, Drill Bit Decimal ...

The surname Harvey is the 1,896th most frequent family name internationally, borne by around 1 in 25,187 people. This surname occurs mostly in The Americas, ...

The right tool clamping technology for every kind of machining operation. Discover now Tool Holders CAT Steep taper ASME B5.50 PSC Polygon Shank ISO 26623

{"Number of Flutes":"-","Chamfer Length - Inch":["0.07874","0.03937","0.055118","0.125984","0.062992","0.19685","0.098425","0.23622","0.11811","0.27559","0.137795"],"Square Width - Metric (k)":["3.2","4","4.5","5","5.5","6.5"],"Major Diameter - Metric":["3","4","5","6","8","10","12"],"Overall Length - Metric (L)":["46","52","60","62","70","75","82"],"Tap Drill Size Max - Metric":["2.796","3.714","4.674","5.592","7.49","9.388","9.49","11.286","11.388","11.49"],"Shank Diameter - Metric (d)":["4","5","5.5","6","6.2","7","8.5"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["19","21","23.9","29"],"Tap Drill Size Min - Metric":["2.745","3.643","4.592","5.49","7.363","9.235","9.363","11.108","11.235","11.363"],"Square Length - Metric (Ik)":["6","7","8","9"],"Thread Length - Metric (Lc)":["10","13","15.9","19","22","24","29"],"Coolant Thru":"No","Chamfer Type":["Plug (4P)","Bottom (2P)"],"Benefit 3":"Provides High hardness with improved wear resistance and Increased production levels with longer tool life.","Benefit 2":"Provides versatile use in both through and blind hole applicaitons","Brand":"EXOCARB","Aluminum : 6061; 7075":"N; Best","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Aluminum : Casting":"N; Best","Cutting Speed (SFM) - Aluminum : Casting":"50-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Feature 1":"Micrograin carbide body","Cutting Direction":"RH","Product Category":"Forming","Feature 2":"Plug and Bottom","Meets 4H Class of Fit":["No","Yes"],"Interrupted Thread":"No","Full Description":"The EXOCARB Carbide Forming Taps are design to excel in Alminum and Alminum Casting. TiAIN and TiCN coatings are available upon requests for an extended tool life.","Feature 3":"TiCN and TiALN coatings available upon requests","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","List Name":"OT-NRT","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Substrate":"Carbide","STI Thread":"No","Product Overview":"Forming Tap, JIS","Thread Limit":["RH5","RH6","RH7","RH8"],"Meets 6H Class of Fit":"Yes","Short Description":"Tungsten Carbide Forming Taps","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Units":"Metric","View Catalog Page":"Here","Web Literature 1":"8002024CA-TP,63","Web Literature 4":"800389CA","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"19mm - 29mm","Taper-Sizes":"-","Overall-Sizes":"46mm - 82mm","Shank-Sizes":"4mm - 8.5mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20369/Taps_-_Tap_-_EXOCARB_-_List_369_-_Forming_Taps_-_Catalog"],"Friendly Name":"369"}

Order Online. Looking for great food on the go? Choose a location below (pickup or delivery) to order delicious Harveys food to go.

{"Number of Flutes":"-","Chamfer Length - Inch":["0.059055","0.073818","0.088582"],"Square Width - Metric (k)":["4.9","6.2","8"],"Major Diameter - Metric":["6","8","10"],"Tap Drill Size Max - Metric":["5.592","7.49","9.49","9.388"],"Shank Diameter - Metric (d)":["6","8","10"],"Overall Length - Metric (L)":["80","90","100"],"Pitch":["1","1.25","1.5"],"Neck Length - Metric (L1)":["30","35","39"],"Tap Drill Size Min - Metric":["5.49","7.363","9.363","9.235"],"Square Length - Metric (Ik)":["8","9","11"],"Thread Length - Metric (Lc)":["12","15","18"],"View Catalog Page":"Here","Chamfer Type":"Bottom (1.5P)","Brand":"EXOCARB","Aluminum : 6061; 7075":"N; Best","Benefit 2":"Stable cutting performance","Aluminum : Casting":"N; Best","Benefit 1":"Greater reach capability","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : Casting":"50-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Cutting Direction":"RH","Product Category":"Forming","Interrupted Thread":"No","Feature 2":"Carbide protection on the cutting edge","Feature 1":"DIN Overall Length","Full Description":"The EXOCARB Carbide Forming Taps are design to excel in Alminum and Alminum Casting.","Meets 2B Class of Fit":"No","Notes":"See page 784 for tap drill recommendations.","List Name":"OTC-NRT","Web Literature 1":"8002024CA-TP,62","Meets 3B Class of Fit":"No","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Web Literature 4":"800389CA","Substrate":"Carbide","STI Thread":"No","Product Overview":"Carbide Inlaid, DIN Overall Length, DIN Shank","Thread Limit":"RH7","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Short Description":"Tungsten Carbide Forming Taps","Thread Size - Metric":["M6","M8","M10"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"30mm - 39mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 100mm","Shank-Sizes":"6mm - 10mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014153/Taps_-_Tap_-_EXOCARB_-_List_14153_-_Forming_Taps_-_Catalog"],"Friendly Name":"14153"}

{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985"],"Chamfer Length - Inch":["0.034448","0.03937","0.044291","0.029527","0.049212","0.035433","0.059055","0.041338","0.068897","0.047244","0.07874","0.098425","0.073818","0.123031","0.088582","0.147637","0.103346","0.172244"],"Major Diameter - Metric":["1.6","1.7","2","2.5","2.6","3","3.5","4","5","6","8","10","12"],"Overall Length - Metric (L)":["41.3","42.9","44.5","46","47.6","49.2","50.8","54","60.3","63.5","69.1","74.6","85.7"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218"],"Tap Drill Size Max - Metric":["1.457","1.557","1.837","2.316","2.416","2.796","3.255","3.714","4.674","5.592","7.49","9.592","9.388","11.286","9.49"],"Pitch":["0.35","0.4","0.45","0.5","0.6","0.7","0.8","1","1.25","1.5","1.75"],"Tap Drill Size Min - Metric":["1.422","1.522","1.796","2.271","2.371","2.745","3.194","3.643","4.592","5.49","7.363","9.49","9.235","11.108","9.363"],"Neck Length - Metric (L1)":["8.9","10.5","12.1","13.8","13.7","16","17.5","19.6","22.2","25.4","28.6","31.8","49"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125"],"Thread Length - Metric (Lc)":["7.9","9.5","11.1","12.8","12.7","6.2","8.4","9.6","12","15","18","21"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)"],"Brand":"EXOTAP","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Coolant Thru":"No","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"15-30","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"10-15","Hardened Steels : 35 HRC":"H; Good","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-130","Cutting Speed (SFM) - Die Steels":"15-20","Cutting Speed (SFM) - Aluminum : Casting":"65-130","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-150","Cutting Speed (SFM) - High Carbon Steel : 1065":"15-30","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Stainless Steels : 300":"15-50","Cutting Speed (SFM) - Stainless Steels : 400":"15-50","Interrupted Thread":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Full Description":"EXOTAP NRT Taps Performance Form Taps for Materials < 32Rc","Meets 2B Class of Fit":"No","Web Literature 1":["8002024CA-TP,68","8002024CA-TP,69"],"Meets 3B Class of Fit":"No","High Carbon Steel : 1065":"P; Best","List Name":"VP-NRT","Thread Type":["M","MF"],"Web Literature 4":"800389CA","STI Thread":"No","Product Overview":"CPM, V-coating","Thread Limit":["D3","D5","D4","D6","D7","D8","D9","D10","D11"],"Stainless Steels : 300":"M; Best","Low Carbon Steel : 1010; 1018":"P; Best","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Good","Short Description":"Premium Powder Metal High Speed Steel","Meets 4H Class of Fit":["Yes","No"],"Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M1.6","M1.7","M2","M2.5","M2.6","M3","M3.5","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"8.9mm - 49mm","Taper-Sizes":"-","Overall-Sizes":"41.3mm - 85.7mm","Shank-Sizes":"3.5814mm - 9.6774mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014150/Taps_-_Tap_-_EXOTAP_NRT_-_List_14150_-_Forming_Taps_-_Catalog"],"Friendly Name":"14150"}

{"Number of Flutes":"-","Square Width - Metric (k)":["4.8514","6.0452","7.2644","6.985","8.1788","9.144","10.3124","12.4206","13.2842","14.478","17.0688","19.4564","21.1074","23.495","27.2288","28.9306"],"Chamfer Length - Inch":["0.098425","0.073818","0.123031","0.088582","0.059055","0.265748","0.177165","0.221456","0.147637","0.172244","0.310039","0.103346","0.19685","0.11811","0.35433","0.442913","0.246062","0.295275","0.531496","0.344488","0.3937","0.044291","0.132874"],"Major Diameter - Metric":["6","7","8","10","12","14","16","18","20","22","24","27","30","33","36","42","45"],"Tap Drill Size Max - Metric":["5.592","5.694","6.592","7.592","7.49","7.694","9.592","9.388","9.49","11.286","11.592","11.388","11.49","13.184","13.388","15.388","15.184","17.388","16.98","19.388","18.98","21.388","21.184","20.98","23.388","23.184","22.776","25.776","28.572","31.572","34.368","40.164","43.164"],"Overall Length - Metric (L)":["80","90","100","110","125","140","160","180","200","220"],"Shank Diameter - Metric (d)":["6.477","8.0772","9.6774","9.3218","10.8966","12.192","13.7668","16.5608","17.7038","19.304","22.7584","25.9334","28.1432","31.3182","36.322","38.5826"],"Pitch":["1","0.75","1.25","1.5","1.75","2","2.5","3","3.5","4","4.5"],"Neck Length - Metric (L1)":["30","35","39","49.1","50.1","54","55","61.8","67.4","68.4","64","72","80","88"],"Tap Drill Size Min - Metric":["5.49","5.618","6.49","7.49","7.363","7.618","9.49","9.235","9.363","11.108","11.49","11.235","11.363","12.98","13.235","15.235","14.98","17.235","16.725","19.235","18.725","21.235","20.98","20.725","23.235","22.98","22.47","25.47","28.215","31.215","33.96","39.705","42.405"],"Square Length - Metric (Ik)":["7.9375","9.525","11.1125","12.7","14.2875","15.875","17.4625","19.05","22.225","25.4","26.9875","28.575","31.75"],"Thread Length - Metric (Lc)":["10","12","15","17","20","25","30","18","21","24","27"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)","Plug (4.5P)"],"Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Coolant Thru":"Yes","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Hardened Steels : 35-45 HRC":"H; Good","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"65-100","Cutting Speed (SFM) - Aluminum : Casting":"75-110","Cutting Speed (SFM) - Aluminum : 6061; 7075":"80-130","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"15-40","Notes":"For Stainless Steel, please use non-water-soluble coolant or highly concentrated water-soluble coolant.","Cutting Speed (SFM) - High Carbon Steel : 1065":"65-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"75-130","Die Steels":"P; Best","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"75-130","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-10","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-10","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-20","Cutting Speed (SFM) - Stainless Steels : 400":"20-45","Interrupted Thread":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Cutting Speed (SFM) - Stainless Steels : 300":"20-50","Feature 1":"Fluteless Forming Tap","Meets 2B Class of Fit":["No","Yes"],"List Name":"OIL-S-XPF","Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 1":["8002024CA-TP,47","8002024CA-TP,48","8002024CA-TP,49"],"Hardened Steels : 35 HRC":"H; Best","Web Literature 4":"800389CA","Meets 3B Class of Fit":["No","Yes"],"Web Literature 2":"800222CA-V5","Web Video 1":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Thread Type":["M","MF"],"Stainless Steels : 17-4PH":"M; Best","STI Thread":"No","Stainless Steels : 300":"M; Best","Thread Limit":["D5","D8","D4","D7","D9","D10","D6","D11","D12","D13","D15","D16","D17"],"Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Meets 4H Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Meets 6H Class of Fit":["Yes","No"],"Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, Coolant Thru, V-Coating","Thread Size - Metric":["M6","m7","M8","M10","M12","M14","M16","M18","M20","M22","M24","M27","M30","M33","M36","M42","M45"],"Units":"Metric","Surface Treatment":"V","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"30mm - 88mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 220mm","Shank-Sizes":"6.477mm - 38.5826mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016150/Taps_-_Tap_-_EXOPRO_XPF-OIL_-_List_16150_-_Forming_Taps_-_Catalog"],"Friendly Name":"16150"}

{"Chamfer Length - Inch":["0.028125","0.040178","0.046875","0.05625","0.070312","0.09375","0.1125","0.080357","0.125","0.140625","0.160714","0.173076"],"Number of Flutes":"-","Major Diameter - Inch":["0.06","0.086","0.099","0.112","0.138","0.164","0.19","0.25","0.3125","0.375","0.4375","0.5"],"Tap Drill Size Max - Inch":["0.0549","0.078714","0.0905","0.1018","0.12525","0.15125","0.173","0.17725","0.2296","0.235429","0.289833","0.2955","0.3495","0.358","0.408357","0.4171","0.468615","0.4796"],"Neck Length - Inch (L1)":["0.356692","0.476","0.535","0.559","0.685","0.752","0.866","0.996","1.126","1.252","1.713","1.933"],"Threads Per Inch":["80","56","48","40","32","24","20","28","18","16","14","13"],"Tap Drill Size Min - Inch":["0.053625","0.076893","0.088375","0.09925","0.122063","0.148063","0.16875","0.174063","0.2245","0.231786","0.284167","0.29125","0.343125","0.35375","0.401071","0.412","0.460769","0.4745"],"Square Length - Inch (Ik)":["0.1875","0.25","0.3125","0.375","0.4375","0.40625"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.255","0.318","0.381","0.323","0.367"],"Overall Length - Inch (L)":["1.625","1.75","1.813","1.875","2","2.125","2.375","2.5","2.719","2.938","3.156","3.375"],"Thread Length - Inch (Lc)":["0.317322","0.437","0.496","0.295","0.37","0.374","0.492","0.594","0.665","0.752","0.858","0.921"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.191","0.238","0.286","0.242","0.275"],"View Catalog Page":"Here","Coolant Thru":"No","Class of Fit":"2B","Chamfer Type":"Bottom (2.25P)","Benefit 1":"Eliminates the need to choose the correct thread limit","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Brand":"HY-PRO TAP","Feature 1":"2B Class of Fit","Cutting Speed (SFM) - Aluminum : 6061; 7075":"45-100","Cutting Speed (SFM) - Aluminum : Casting":"45-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-100","Cutting Direction":"RH","Product Category":"Forming","Meets 4H Class of Fit":"No","Full Description":"Semi-premium taps made from premium high speed steel for general purpose tapping applications.","Medium Carbon Steel : 1035; 1045":"P; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","List Name":"NRT","Web Literature 1":["8002024CA-TP,89","8002024CA-TP,90"],"Product Overview":"2B, HSS","Meets 3B Class of Fit":"No","Web Literature 4":"800389CA","Notes":"Other coatings are available upon request. See page 784 for tap drill recommendations.","Units":"Inch","Surface Treatment":["BRIGHT","TiN","TiCN"],"STI Thread":"No","Meets 2B Class of Fit":"Yes","Low Carbon Steel : 1010; 1018":"P; Best","Thread Size - Number":["No. 0","No. 2","No. 3","No. 4","No. 6","No. 8","No. 10"],"Short Description":"General Purpose Class of Fit Taps","Substrate":"HSS","Thread Type":["UNF","UNC"],"Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.356692\" - 1.933\"","Taper-Sizes":"-","Overall-Sizes":"1.625\" - 3.375\"","Shank-Sizes":"0.141\" - 0.381\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%20285/Taps_-_Tap_-_HY-PRO_SEVEN_-_List_285_-_Forming_Taps_-_Catalog"],"Friendly Name":"285"}

{"Number of Flutes":"-","Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985"],"Chamfer Length - Inch":["0.034448","0.023622","0.03937","0.026574","0.044291","0.029527","0.049212","0.035433","0.059055","0.106299","0.041338","0.068897","0.124015","0.047244","0.07874","0.141732","0.098425","0.177165","0.073818","0.123031","0.221456","0.088582","0.147637","0.265748","0.103346","0.172244","0.310039"],"Major Diameter - Metric":["1.6","1.7","2","2.5","2.6","3","3.5","4","5","6","8","10","12"],"Overall Length - Metric (L)":["41.3","42.9","44.3","46","49.2","50.8","54","60.3","63.5","69.1","74.6","85.7"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218"],"Tap Drill Size Max - Metric":["1.457","1.557","1.837","2.316","2.416","2.796","3.255","3.714","4.674","5.592","7.49","9.388","11.286"],"Pitch":["0.35","0.4","0.45","0.5","0.6","0.7","0.8","1","1.25","1.5","1.75"],"Tap Drill Size Min - Metric":["1.422","1.522","1.796","2.271","2.371","2.745","3.194","3.643","4.592","5.49","7.363","9.235","11.108"],"Neck Length - Metric (L1)":["8.9","10.5","12.1","13.8","13.7","16","17.5","19.6","22.2","25.4","28.6","31.8","49.1"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125"],"Thread Length - Metric (Lc)":["7.9","9.5","11.1","12.8","12.7","6.2","8.4","10","12","15","18","21"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Good","Chamfer Type":["Modified Bottom (2.5P)","Bottom (1.5P)","Plug (4.5P)"],"Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Brand":"HY-PRO TAP","Coolant Thru":"No","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"15-25","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"10-15","Hardened Steels : 35 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-25","Cutting Speed (SFM) - Aluminum : Casting":"45-100","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"35-100","Cutting Speed (SFM) - Die Steels":"15-20","Cutting Speed (SFM) - Aluminum : 6061; 7075":"50-90","Cutting Speed (SFM) - High Carbon Steel : 1065":"15-25","Full Description":"HY-PRO NRT Taps Forming Tap, For a Wide Range of Materials","Cutting Direction":"RH","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Product Category":"Forming","Cutting Speed (SFM) - Stainless Steels : 400":"15-40","Die Steels":"P; Good","Interrupted Thread":"No","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Meets 2B Class of Fit":"No","List Name":"NRT","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request.","Web Literature 1":["8002024CA-TP,82","8002024CA-TP,83","8002024CA-TP,84","8002024CA-TP,85","8002024CA-TP,86","8002024CA-TP,87","8002024CA-TP,88"],"High Carbon Steel : 1065":"P; Best","Thread Type":["M","MF"],"Surface Treatment":["BRIGHT","Steam Oxide","TiN","TiCN"],"Web Literature 4":"800389CA","STI Thread":"No","Thread Limit":["D3","D5","D4","D6","D7","D8","D9","D10","D11","D12","D13","D14"],"Low Carbon Steel : 1010; 1018":"P; Best","Product Overview":"Forming Tap, For a Wide Range of Materials","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Good","Short Description":"Premium Design for a Wide Range of Materials","Meets 4H Class of Fit":["Yes","No"],"Meets 6H Class of Fit":["Yes","No"],"Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Stainless Steels : 400":"M; Good","Thread Size - Metric":["M1.6","M1.7","M2","M2.5","M2.6","M3","M3.5","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"8.9mm - 49.1mm","Taper-Sizes":"-","Overall-Sizes":"41.3mm - 85.7mm","Shank-Sizes":"3.5814mm - 9.6774mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2014101/Taps_-_Tap_-_HY-PRO_NRT_-_List_14101_-_Forming_Taps_-_Catalog"],"Friendly Name":"14101"}

At Haus of Tools we offer a FREE GIFT with your order based on your purchase total, choose from a number of offers based on the price point. The best part of this program is it's always running and always being updated with new swag from your favorite brands. Look through our Freebies Page for a full list of ongoing promotions.

{"Number of Flutes":"-","Major Diameter - Inch":["0.086","0.112","0.138","0.164","0.19","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Chamfer Length - Inch":["0.044642","0.0625","0.052083","0.078125","0.069444","0.104166","0.125","0.089285","0.138888","0.15625","0.178571","0.192307","0.208333","0.227272","0.25","0.277777","0.3125"],"Tap Drill Size Max - Inch":["0.1013","0.1333","0.1299","0.1637","0.159","0.1895","0.187","0.2238","0.216","0.2899","0.2789","0.3568","0.3462","0.4248","0.4091","0.4938","0.4777","0.56","0.5402","0.6282","0.6077","0.6961","0.6702","0.8276","0.8002","0.9606","0.9316","1.0966","1.0658"],"Neck Length - Inch (L1)":["0.718","0.841","0.8","1.003","0.996","1.198","1.196","1.203","1.199","1.377","1.535","1.933","1.712","1.972","2.125","2.165","2.433","2.653","3.011","3.114"],"Threads Per Inch":["56","40","48","32","36","24","20","28","18","16","14","13","12","11","10","9","8"],"Tap Drill Size Min - Inch":["0.0994","0.1309","0.1281","0.1613","0.1569","0.1873","0.1849","0.221","0.2138","0.2868","0.2769","0.3537","0.344","0.4215","0.407","0.4907","0.4758","0.557","0.5383","0.6251","0.6057","0.6928","0.6682","0.8241","0.798","0.9573","0.9297","1.0925","1.0636"],"Square Length - Inch (Ik)":["0.1875","0.25","0.28125","0.3125","0.375","0.4375","0.40625","0.5","0.5625","0.625","0.6875","0.75","0.8125","1","0.875"],"Shank Diameter - Inch (d)":["0.141","0.194","0.168","0.22","0.255","0.318","0.381","0.367","0.323","0.429","0.48","0.542","0.59","0.697","0.652","0.8","1.021","0.896"],"Thread Length - Inch (Lc)":["0.261","0.365","0.364","0.362","0.456","0.449","0.454","0.452","0.605","0.6","0.5","0.555","0.625","0.712","0.767","0.834","0.909","1","1.11","1.251"],"Overall Length - Inch (L)":["2.274","2.554","2.858","2.839","3.257","3.246","3.543","3.937","4.331","4.921","5.512","6.299","7.087"],"Square Width - Inch (k)":["0.11","0.152","0.131","0.165","0.191","0.238","0.286","0.275","0.242","0.322","0.36","0.406","0.442","0.523","0.489","0.6","0.766","0.672"],"View Catalog Page":"Here","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"Longer life at faster speeds and the ability to use larger forming taps.","Benefit 1":"Produces no chips, making it up to 17X more durable than cut taps.","Benefit 4":"Additional length provides greater reach capabilities.","Chamfer Type":"Modified Bottom (2.5P)","Brand":"EXOPRO","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 3":"For those with coolant-fed spindles, even more performance can be achieved.","Coolant Thru":"No","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"10-30","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"12-25","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"50-85","Feature 2":"40-50% less machining torque","Cutting Speed (SFM) - Aluminum : 6061; 7075":"65-115","Cutting Speed (SFM) - Aluminum : Casting":"65-90","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"50-100","Cutting Speed (SFM) - Stainless Steels : 400":"15-35","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"50-115","Cutting Direction":"RH","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"50-115","Cutting Speed (SFM) - High Carbon Steel : 1065":"50-85","Cutting Speed (SFM) - Stainless Steels : 300":"15-40","Die Steels":"P; Best","Product Category":"Forming","Cutting Speed (SFM) - Nickel Alloy : Inconel":"8-12","Meets 4H Class of Fit":"No","List Name":"HL-S-XPF STI","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"8-15","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 3":"Coolant-fed version also available (S-XPF)","Feature 4":"DIN Overall Length","Full Description":"The EXOPRO S-XPF X Performer Taps represent a new evolution in forming tap technology. These form taps generate up to 50% less torque versus other forming taps, making it feasible to tap materials up to 40 HRC and sizes up to or exceeding 1\" in diameter.","Nickel Alloy : Inconel":"S; Good","Feature 1":"Fluteless Forming Tap","Web Literature 1":["8002024CA-TP,320","8002024CA-TP,321"],"Cutting Speed (SFM) - Die Steels":"20-65","Web Literature 4":"800389CA","Units":"Inch","Web Video 1":"https://youtu.be/oHBvbgqfjw0","Web Video 2":"https://youtu.be/oHBvbgqfjw0","High Carbon Steel : 1065":"P; Best","Web Video 3":"https://youtu.be/oHBvbgqfjw0","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Meets 2B Class of Fit":"Yes","Low Carbon Steel : 1010; 1018":"P; Best","Short Description":"Extreme Performance Forming Tap","Thread Limit":["H1","H2","H3","h4","H5","h6","H7","H9","H10","h8","H11"],"Stainless Steels : 400":"M; Best","Thread Size - Number":["No. 2","No. 4","No. 6","No. 8","No. 10"],"Medium Carbon Steel : 1035; 1045":"P; Best","Meets 3B Class of Fit":["Yes","No"],"Titanium : 6AL4V (30HRC)":"S; Good","Substrate":"HSS-CO","Product Overview":"HSS-Co, DIN Overall Length, V-Coating, STI","Thread Type":["UNC STI","UNF STI"],"Surface Treatment":"V","STI Thread":"Yes","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.718\" - 3.114\"","Taper-Sizes":"-","Overall-Sizes":"2.274\" - 7.087\"","Shank-Sizes":"0.141\" - 1.021\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FForming%2FList%2016260/Taps_-_Tap_-_EXOPRO_XPF_-_List_16260_-_Screw_Thread_Insert_Taps_-_Catalog"],"Friendly Name":"16260"}

This chart provides info on the appropriate tap and drill bit sizes to use when creating threaded holes in various materials.

Hand-Held Release Liner and Back Slitting Cutting Tools. Be the first to review this product. Skip to the end of the images gallery.

Are you ready to join the HoT Club and unlock a world of rewards? With every purchase, you'll earn valuable HoT Coins that can be redeemed for discounts on future orders. But that's not all - you can also earn extra points by leaving reviews, following us on social media, or referring your friends. Don't miss out on this amazing opportunity!

Share your new purchase on social media with the hashtag, #HAUSOFTOOLS and be entered into our next giveaway! We love to see satisfied customers and what you have to say about the products we carry!

bearing

When to Opt for a High-Performance End Mill - 2 flute vs 4 flute end mill

You Might Also Be Interested In