WhizDrill Micro Drill Bits - micro drill bit

2024-08-30 16:13:16

Forming Tap set

Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.

A roll type tap that does not expel chips.Features· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.· It does not produce chips and provides stable screw accuracy.· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.Applications· Ideal for rolled threading of non-ferrous metals such as aluminum.

Threadform taps

You should read our 6 step guide to drilling through metal because the same rules apply to drilling harder grade alloys.

A rise up type tap that does not expel chips.Features· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.· It does not produce chips.· Less inconsistent screw precision.· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.Applications· Suitable for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.

Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

Watch videos of hardened metal being drilled with TTP HARD cobalt drill bits. You will see how easily Hardox 450 can be drilled using the correct speed, pressure and pleanty of libricant paste. Likewise a 12.9 cap head bolt is easily drilled when the drill bit is allowed to do the work and rest periods prevent the drill bit from overheating. Finally you will see a BMW flywheel and even JCB tow plate steel being drilled without any effort using correct speed, pressure and lubrication.

Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

Form tapssizes

A roll type tap that does not expel chips.Features· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.Applications· Ideal for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.· For standard dimensions, it is convenient when the protrusion length is insufficient.

“I’ve been at this a long time and I have never seen bits this good. On my test, they breezed through gr 8 bolt on the press with cut oil. When I tested with a chord drill, I found that you could break the bit if you weren’t perfectly square. On the car with the broken exhaust stud, it was fantastic, they bite like crazy. I’m going to give them as gifts to my wrenching friends.”

It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.

We have selected some customer reviews to give you an idea of some of the hardened metals and steels TTP HARD cobalt drill bits will drill through. You will see that whether you are drilling a hardened 12.9 bolt or an exhaust manifold stud once you follow the basic drilling principles you should have the same level of success.

You should read our 6 step guide to drilling through metal because the same rules apply to drilling harder grade alloys.

“They are fabulous. I still haven’t had the time to use them for their actual intended purpose – drilling out exhaust manifold studs, but I did try them on a couple of bolts to see how they did and was very impressed! Told a bunch of my friends about them. Hoping to get a joint order together. I want more sizes or one of the sets!”

[Features]· A high-productivity tap tool.· Long tool life and excellent chip processing provide high stability.· Rolling tap that does not emit chips.· Taps are available for each work material, making selection easy.[Applications]· For blind hole or through hole machining.· Work materials: Steel, stainless steel, aluminum alloy, nickel alloy.

Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.

“These drills perform exceptionally well. They’re far superior to anything I can buy locally. Delivery is extremely fast. I was able to finish drilling a 3/8” hole through 1-1/4” hardened bar stock. I must have gone through a dozen conventional cobalt bits before purchasing this kit. Love ‘em.”

[Features]· Reduction of torque is now achieved.· Durability is dramatically improved through active use of materials and coatings with excellent wear resistance.· Stable threading of tempered material (up to 35HRC) is realized.· It can be used with water-soluble cutting fluids.

Thread formingform taps

If you can drill metal then certainly you should not fear drilling hardened steel because the same techniques apply. Read below what customers say about their experiences drilling hardened metals and then watch the videos of TTP HARD drills in action.

Rollformtap chart

“I was very happy with my purchase of the tough drill bits, they allowed me to drill out some broken off tensile bolts form a 25 year old motorbike cylinder head, failure in this would have meant finding a new head or abandoning the project.”

A rise up type tap that does not expel chips.Features· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.Applications· Suitable for rolled threading of non-ferrous metals such as aluminum.· For standard dimensions, it is used when the protrusion length is insufficient.

CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.

• Tap Model: Rolled Tap• Coating Type: Others• Thread Type: Meter• Tool Material Type: High-Speed Steel• Coating Presence: Included

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Ideal for tapping soft steel thin plate with a tensile strength of 700 N/mm² or less. Suppresses production of whiskers, flashes, and chipping.

•Thread Types : Meter•Thread Size (Nominal) : M11, M12, M14, M16, M18, M20, M3, M3.5, M4, M5, M6, M7, M8, M9•Number of Chamfered Threads (Lcf) : 1P, 2P•Tool Material Type : High-Speed Steel•Work Material : Brass (Bs), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Low-Carbon Steel (C Content of 0.25% or Less), Rolled Aluminum Material (AL), Stainless Steel (SUS), Zinc Alloy Castings (ZDC)•Tap Model : Rolled Tap For complete product overview and details on Long Seamless TAFLET, see the sections below:

Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

Formtap vs cut tap

The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.

If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.

• Tap Model: Rolled Tap• Coating Type: TiCN• Thread Type: Meter• Tool Material Type: High-Speed Steel• Coating Presence: Included

Formtap drill size

Highly accurate, ultra-high-speed female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.

[Specifications]· Shape: Roll tap· Screw type: metric· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]

There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.

This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages.

•Thread Types : Meter•Thread Size (Nominal) : M10, M11, M12, M14, M16, M18, M2, M2.3, M2.5, M2.6, M20, M3, M3.5, M4, M5, M6, M7, M8, M9•Number of Chamfered Threads (Lcf) : 1P, 2P•Tool Material Type : High-Speed Steel•Work Material : Brass (Bs), Cast Aluminum Alloy (AC, ADC), Copper (Cu), Low-Carbon Steel (C Content of 0.25% or Less), Rolled Aluminum Material (AL), Stainless Steel (SUS), Zinc Alloy Castings (ZDC)•Tap Model : Rolled Tap For complete product overview and details on Seamless TAFLET, see the sections below: