Image

GD-DH (10.00-11.50) Gundrills Carrying Indexable Inserts with Single Chip Splitting Cutting Edge and a Wiper for High Hole Surface Quality

DFN A-5D-BD Exchangeable Head Drills with a Reinforced Body and a Flat Shank, Diameter Ratio 5xD, for Construction Beam Industry

Unless otherwise stated in the description, all insert knives are made from premium C-2 grade of carbide.  All of the Insert Knives in the table below have a 26 mm holes.

DCM-3.5D (7.5-20.9 mm) Drill Body with Exchangeable Heads, Internal Coolant, Flat Shank, No Flange, Drilling Depth 3.5xD, for Chamfering Holder

DCNS-5D Drill Body with Exchangeable Heads, without Flange, One Flat Shank, Drilling Depth 5xD, Suitable for Chamfering Holders

To get the most out of your insert knives, make sure the torque is even on your cutting tool.  Using a Torque screwdriver can ensure that your torque is even and extend the life of your cutting tools.

DR-4D-T Indexable Insert Drills for Non-Rotating Applications with Coolant Holes and One Flat Shank, Drilling Depth 4xD

S-SLANR/L-TANG Boring Bars Carrying LNMX Tangentially Screw Clamped Inserts with 4 Cutting Edges for High Metal Removal Rates

DCNT (M8-M24) Drill Body with Exchangeable Heads, Chamfering Inserts, Internal Coolant and One Flat Shank. Used for Pre-Tread Holes

Image

DCM-3D (7.5-25.9 mm) Drill Body with Exchangeable Heads, Internal Coolant Holes and One Flat Shank. Drilling Depth: 3xD

DCM-5D (7.5-25.9 mm) Drill Body with Exchangeable Heads, Internal Coolant Holes and One Flat Shank. Drilling Depth: 5xD

A-SDUCR/L-13-SL Boring Bars Carrying 55° Rhombic Inserts with 7° Clearance Angle for High Rigidity in Profiling Applications

DCT (M8-M24) Drill Body with Exchangeable Heads, Chamfering Inserts, Internal Coolant and One Flat Shank. Used for Pre-Tread Holes.

Unless otherwise stated in the description, all insert knives are made from premium C-2 grade of carbide.  All of the Insert Knives in the table below have a 14 mm holes.

Image

DCNS-3D Drill Body with Exchangeable Heads, without Flange, One Flat Shank, Drilling Depth 3xD, Suitable for Chamfering Holders

GD-DH (12-13.5) Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality

GD-DH Gundrills Carrying Triangular Inserts with 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality

Unless otherwise stated in the description, all insert knives are made from premium C-2 grade of carbide.  All of the Insert Knives in the table below have a 37 mm holes.