Twin head insert. * Using minimal insert material and a multilayer AX coating, cost reductions per corner are achieved, enabling a long working life and high precision machining.

[Features]·Square insert for milling cutter·Usable number of cutting edges: 4 (PCD is 1)·Compatible Work Material: steel/stainless steel/cast iron/non-ferrous metal·Materials: Carbide, Carbide Coat, Cermet, PCD

[Features]The special nano-laminated coating improves abrasion resistance and stability and is compatible with roughing and semi-finishing of stainless steel and heat resistant alloys, and for the parting-off of stainless steel.

[Applications]It can be used for machining steel, cast iron, stainless steel, and difficult-to-cut materials. [Features]It is coated and uses a cermet material.

Milling cuttersizes

[Specifications]·Shape: Other "Features of material"· PR1225 is a MEGACOAT with excellent abrasion resistance and heat resistance for a fine-grained carbide substrate.

[Applications]Can be used for machining a wide range of steel materials, such as steel, stainless steel, heat-resistant alloys, titanium alloys, and hardened materials.

[Features]Insert for CoroMill 390. A sharp cutting edge with low resistance. The precise helical design of the blade tip delivers dimensional accuracy as close as possible to precision-polishing solid tools. For face milling, shoulder cutting and grooving. An insert for universal cutters. Can be used for any kind of machining or work material.

Endmilling Cutter

(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.

Chamfer mill, M25 Series, Insert, SDMW [10 Pcs. Included][Specifications]Shape (initial letter of part number): S (square)Relief angle: D (15°)Work material: cast Iron / non-ferrous metals / heat resistant alloys, titanium alloysNumber of available corners: 4Cutting edge length (mm): 9.53Thickness (mm): 3.18Grade: THM

"Mirror Radius RNM/MRN" insert for high-speed high-efficiency machining of molds, usable for medium finishing to finishing and also supports high hardness materials.· [Features]· Uses new material "DH102," a combination of "New DH (Dijet Hard) Coating" (a new PVD coating for hardened materials and high speed machining) and a micrograin ultra-hard alloy for hardened materials to attain long-life use. JC8015 material is available for general steel, etc.· A positive blade shape is used, like the conventional HRM type, with low cutting resistance and favorable cutting quality.· Tools can be consolidated by using 1 holder and changing the insert, handling from rough machining to finishing of any work material.

Combines sharpness and edge strength. Reduced cutting resistance realizes chip discharge amounts with lower required power

[Applications]Can be used for machining a wide range of steel materials, such as steel, stainless steel, heat-resistant alloys, titanium alloys, and hardened materials.

Milling insertspecification

A general-purpose insert tip. [Work Material]Steel, stainless steel, cast iron, aluminum, cast iron (high-speed machining), hardening steel, aluminum (high-speed machining)

Manufactured by Sumitomo Electric Hardmetal.The optimized shape and tough material provide both cutting performance and strength at a high level.

Blade tip enhanced-type tips for high-hardness materials are newly added to the product range of "Mirror Ball BNM/MBN Type" for high-precision mold finish machining[Features]· Reinforced blade tip type that brings out its best under harsh conditions such as long projection length machining, overlay machining, and multiple work material simultaneous cutting.· Features the new material "DH102", a combination of the new PVD coating "New DH (Dijet Hard) Coat" for high-hardness materials/high-speed machining and micro grain carbide for high-hardness materials.· The negative blade shape provides long service life even in high-speed machining of high-hardness materials exceeding 60 HRC.

IndexableCutter

It is so shaped as to combine high stiffness and sharp cutting performance due to the negative blade shape and positive relief angle.

[Features]·Tip for end mills for shoulder milling that can be used for general purposes·Shape (Part number capital letter): A (85° parallelogram)·Relief angle: P (11°)·Number of Corners Available: 2·Compatible work material: Steel/Stainless steel/Cast iron·Materials: Carbide coat·Compatible holder: MKEM

Curved cutting blade adopted to improve cutting edge strength and reduce cutting resistance. Achieves high quality machining in the finishing region with the high precision cutting blade.

Curved cutting blade adopted to improve cutting edge strength and reduce cutting resistance. Achieves high quality machining in the finishing region with the high precision cutting blade.

Image

[Features]· PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.· Compatible with milling of Ti alloy and precipitation hardened stainless steel.[Applications]· For Milling· PR1535: For milling of Ti alloy and precipitation hardened stainless steel

Thank you for your time. Your feedback is essential for our continuous improvement Please use the inquiry form.