The aluminium alloy milling body is lightweight, minimising centrifugal force and hence prolonging spindle life. For long-term protection against abrasion from chips, the cutter body is surface treated.

Image

Walter has now launched its new X·treme Evo Plus drill from the DC180 Supreme product family that is now available up to 8XD for the first time.

H690 WNMU 0705-PNTR – a general use insert with 6 right-hand cutting edges for milling a variety of steel grades. The new insert is produced from grade IC845, a new carbide grade that was developed for milling steel and ferritic and martensitic stainless steel, especially when machining at unfavourable conditions.

Image

The Horn high-performance PCD cutting material is composed of a mixture of different sizes of diamond grains. As the proportion of diamond by volume increases, so do the effective hardness, toughness and cutting edge quality. For the DTM 1710 milling system, Horn offers two different PCD substrates to suit the material to be machined.

The RM chipformer has a reinforced T-land when compared to the currently available inserts. Insert features include a reinforced cutting edge, high resistance to edge breakage and chipping, reduced heat transfer and high edge security. It is recommended for milling at unfavourable conditions and heavy interrupted cuts.

Image

ANT Industries, a leading manufacturer of aero engine and gas turbine components in Atherstone, Warwickshire, has announced a significant milestone in its commitment to quality and excellence.

H690 WNMU 0705PNR-RM – an insert featuring a reinforced cutting edge designed for unfavourable conditions, heavy roughing and interrupted cuts.

To achieve a high quality machined finish on the workpiece and to enable use at high speeds, the tool must be finely balanced with the toolholder, for which purpose balancing holes are provided around the cutter body. To achieve the best possible results, the entire machine environment must be taken into account and brought to the highest possible level of stability. The combination of the machine design, guideways, spindle and workholding system as well as the milling tool have a decisive influence on the result.

If you find this article informative, consider subscribing digitally to Aerospace Manufacturing for free. Keep up to date with the latest industry news in your inbox as well as being the first to receive our magazine in digital form.

The NeoMill-Alu-QBig indexable insert milling cutter from Mapal stands for top performance in high-volume milling of aluminium. The tool manufacturer thus offers a very economical solution for use on high-performance machines, such as those found primarily in the aerospace industry.

Connect with the manufacturing community and supply-chain across 3 days at the UK’s leading annual industrial event.

Following excellent market response, Iscar is expanding the Helido Trigon line with the following insert options:

A new, high-feed milling system for productive finishing of non-ferrous metals and plastics has been introduced by Horn Cutting Tools. Designated DTM 1710, the tool system employs inserts with polycrystalline diamond (PCD) cutting edges brazed onto cassettes that can be finely tuned axially to micron precision via adjusting screws on the tool carrier. The PCD substrate is precisely laser-cut to achieve high surface quality during the finishing process. Axial run-out is set by Horn engineers before the tool is delivered. Compared to other tools of this type on the market, the Horn milling system offers a higher number of cutting edges for any given size. The tools are available in the diameters 50mm (z = 10), 63mm (z = 14), 80mm (z = 18), 100mm (z = 24) and 125mm (z = 30), z representing the number of inserts. All variants have an internal coolant supply directly to the cutting edge. To achieve a high quality machined finish on the workpiece and to enable use at high speeds, the tool must be finely balanced with the toolholder, for which purpose balancing holes are provided around the cutter body. To achieve the best possible results, the entire machine environment must be taken into account and brought to the highest possible level of stability. The combination of the machine design, guideways, spindle and workholding system as well as the milling tool have a decisive influence on the result. The aluminium alloy milling body is lightweight, minimising centrifugal force and hence prolonging spindle life. For long-term protection against abrasion from chips, the cutter body is surface treated. The Horn high-performance PCD cutting material is composed of a mixture of different sizes of diamond grains. As the proportion of diamond by volume increases, so do the effective hardness, toughness and cutting edge quality. For the DTM 1710 milling system, Horn offers two different PCD substrates to suit the material to be machined. www.phorn.co.uk

Tooling manufacturer, Horn has introduced a new carbide insert grade, SG66, for turning components from steel that has been case hardened to 58 HRC.

Designated DTM 1710, the tool system employs inserts with polycrystalline diamond (PCD) cutting edges brazed onto cassettes that can be finely tuned axially to micron precision via adjusting screws on the tool carrier. The PCD substrate is precisely laser-cut to achieve high surface quality during the finishing process. Axial run-out is set by Horn engineers before the tool is delivered.

A new, high-feed milling system for productive finishing of non-ferrous metals and plastics has been introduced by Horn Cutting Tools.

H690 WNMU 0705PNN-MM – an insert with 6 neutral cutting edges intended for machining steel. The neutral cutting geometry can be used for left-hand specially tailored milling tools. The new insert is available in grade IC808 and expands the range of the already available 0.8mm corner radius insert.

The new inserts will provide customers with productive solutions for a broad spectrum of milling applications.

Compared to other tools of this type on the market, the Horn milling system offers a higher number of cutting edges for any given size. The tools are available in the diameters 50mm (z = 10), 63mm (z = 14), 80mm (z = 18), 100mm (z = 24) and 125mm (z = 30), z representing the number of inserts. All variants have an internal coolant supply directly to the cutting edge.