Reduce torque, drag, shale swelling, and dispersion in environmentally sensitive shale. View

SFM to RPM

The HydraSpeed lubricant is easy to mix and can be added to the mud system through the mixing hopper or directly to the surface of the system in pits that provide good agitation.

Lowers coefficient of friction, achieving significant reductions in torque and drag levels. View

Use a plunge rate of 50% or less of the feed rate. So for a feed rate of ... ft/min, use a plunge rate of ... ft/min or less.

Tapping Speed

RheoProfiler rheometer and Drilling Fluid Advisor visualized fluid and drilling measurements in water-based mud View

Feed Rate = Spindle Speed (RPM) * Number of Flutes * Chip Load (inches) = Spindle Speed * Number of flutes * Chip Load = Answer inches/min

HydraGlyde high-performance system with HydraSpeed ROP-enhancing lubricant slash cuttings disposal costs while boosting daily footage by as much as 928 ft, Midland. View

The HydraSpeed ROP-enhancing primary lubricant can be used in all types of water-based drilling systems when drilling highly deviated, extended-reach, or horizontal wells in onshore applications.

We've identified three key environmental issues that are significant for our operations: biodiversity, natural resources, and circularity.

Demonstrating a coefficient of friction factor of 30.8 compared with 39.8 for a higher-cost lubricant, the lubricant has a nonhydrocarbon chemistry that provides the benefits of

Chip loads are provided as ranges. In order to extend the life of your tool, use the lower value in the range. If need to get your job done quickly then you can a higher chipload within the specified range.

We put people first by respecting human rights, building a more inclusive workplace, and driving positive socioeconomic outcomes.

Learn how Schlumberger worked with Artex Energy Group to deploy an integrated solution that opens new opportunities for water-based mud in deep wells. View